Ubuntu :: USB Port Doesn't Recognise USB Stick
May 5, 2010I installed 10.04 on Lenovo T61 and USB port recognises a USB stick with no problems.I installed 10.04 on Lenovo 3 x T40's and USB port does not recognise a USB stick.
View 1 Replies
ADVERTISEMENT
Ubuntu Installation :: Doesn't Recognise Wireless Card?
Feb 8, 2010Little help needed. just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.
I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that! Some nice simple paint by numbers instructions would help me alot if at all possible.
Ubuntu Installation :: Fresh Install Doesn't Recognise HDD?
Oct 25, 2010I'm trying to install Ubuntu 10.10 from a USB stick but neither the install nor the LiveCD will recognise my Hard Disk Drive. They only recognise the USB stick and report that install cannot proceed without at least 2.6GB freespace (of which of course there isn't on the USB stick).
I've installed Ubuntu on a couple of systems before but this is the most advanced and I'm certainly no expert. It's an ASUS P6X58D-E mobo with two WD600GB SATA3 HDD's setup in RAID1 configuration. It's already running W7Ultimate x64 OK on it's own 150GB partition. Of course I can't even run gparted from the LiveCD to repartition. I suspect the problem is the RAID config, but not sure what to do.
Ubuntu Multimedia :: Nvidia X Server Doesn't Recognise S.video?
Feb 25, 2010I have 9.10 64 on a HP TX2020 laptop, with NVIDIA GeForce 6150. I can't get twin monitor to work. When I go into Nvidia X Server, it doesn't recognise the tv over s-video. According to a lot of the forums I've searched, there should be an option to enable xinerama, which there's not. I know I should study this more and I will, but getting simple things to work takes so long on this OS and I'd really just like to see a movie.
View 2 Replies View RelatedUbuntu Installation :: Trying To Dualboot Windows 7 - Doesn't Recognise That Windows Is There
Jan 3, 2011So I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies View RelatedUbuntu :: Doesn't Work On USB Stick
Dec 20, 2010It's just about to make a USB stick boot my ubuntu 10.10. First,I have tried several flash drives. I have downloaded and checkedsum several images, including Mint 10 ( sort of Ubuntu ), I have used UNiversal USB, LinuxLiveUSB creator,Unetbootin and the native program inside Ubuntu. All the time I have the same problem : "line 7: can't open /dev/sr0 no medium found" I have disabled by default the floppy disc from BIOS. I suspect that some line has to be modified. I am not an advanced user of Linux. But I would like to have ubuntu booting from a stick flash drive.
View 7 Replies View RelatedUbuntu Multimedia :: Nvidia Resolution Setting Doesn't Stick
Jun 11, 2010Ubuntu 10.04, nVidia GeForce 9400, driver ver 195.36.15.When I log in, the system always comes up in 800x600 mode. I went into the NVIDIA X Server Settings page and changed it to my preferred setting of 1152x864. I hit Apply, then Save to X Configuration File (with correct root password).All is well until restarting. Then it reverts back. The update doesn't stick. How can I make this the permenant setting?
View 3 Replies View RelatedDebian Hardware :: USB Stick Doesn't Seem To Be Partitioned?
Oct 13, 2010I copied a couple of small files to it, and it seemed to copy fine, I was sure to unmount before removing, but those two files ended up being corrupted and although they appear on the stick, they can't be opened any more. Almost all the other files on the stick are still fine apart from one or two other ones, which definitely used to be openable but now are not. So perhaps it's got some bad blocks or something? So I hunted around for ways to check the stick, I'm guessing maybe it can mark those bits as bad and keep on using the other bits maybe?
I search, and I find fsck, so I run that on the stick and it doesn't seem to find anything, or complain about errors or anything, so I figure it's done nothing. (The stick is formatted as VFAT and can be read by both linux and windows). I remount the stick and see a new, extra file there, a deleted pdf from a few weeks ago apparently recovered by fsck. No problem, I delete it. But I guess that means fsck did do something after all. Then I unmount and remove the stick, and plug it in again just to check that things are working. And here's where it gets weird.
When I remount the stick, the files which were there before are no longer there. Instead, there's just a single png file, apparently from 2006, which I haven't seen since then I don't think. And I can open that file fine. Bizarre, where are my files gone? I unmount the stick, remount it, and all my files are back again! What the? Finding this curious, I run gparted on the stick to see if there is maybe more than one partition, and some glitch caused it to mount some hidden partition or something (I'm stabbing wildly in the dark, as you see). But gparted says that the whole drive is "unallocated", and fdisk seems to be saying it hasn't got a partition table. So I guess I've got a few questions coming out of this:
- Is this a problem that the stick doesn't seem to be partitioned? Should I partition it with gparted?
- Is there a way to do a proper check of the disk to check for bad blocks/sectors/clusters/whatever they're called, and mark them? fsck seemed to finish too quick to have really checked things properly.
- Is this stick dying and in need of replacement?
Ubuntu Multimedia :: Skype Command And Installing V4l2ucp Doesn't Stick
Sep 25, 2010i have been able to get my webcam working in Skype by doing the LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype command and installing v4l2ucp but it doesn't stick. So next time i boot it is like i didn't do anything. I have read a few things on it on this forum and i am not sure what to do next. Is there a conflict with my nvidia video card? I only installed Ubuntu 10 a week ago i think.
View 1 Replies View RelatedUbuntu Networking :: Nokia CS-10 USB Internet Stick And 10.04 - Wireless 3g Connection - Doesn't Even Get Recognized ?
May 2, 2010After having trouble with Ubuntu 9.10 (solved with a nice modemmanager bug fix by a great user) here we are with the new Lucid Lynx: until now, just to be safe, I am trying my Nokia CS-10 USB stick (for wireless 3g connection) with the Live Ubuntu, and it doesn't even get recognized (no red light or anything else)...
Here's the log:
Code:
Debian :: USB Stick Doesn't Pick Up Globe UMTS Signal
May 6, 2015i have successfully installed debian 8 stable, but the USB stick doesn't pick up Globe UMTS signal, i can make a new Mobile Broadband onnection with no problems though..i don't know whats wrong but with my current debian jessie testing PC, i can connect to the USB stick for internet with no problem
i tried installing a guest debian jessie testing with virtual box, but still the USB stick can't pick up the Globe UMTS signal, even if i enable the USB stick in virtual box
Code: Select allBus 002 Device 008: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard
OpenSUSE Install :: Live Usb Stick Doesn't Work - I/O Errors
Apr 21, 2011I've been trying to figure out how to run/install openSUSE from a usb stick for several days. I downloaded the 11.4 .iso from distrowatch & used the following command in Linux Mint to put it on the usb stick.
Code:
sudo dd if=openSUSE-11.4-KDE-LiveCD-x86_64.iso of=/dev/sdc
It gets to the loading screen and get stuck. It has a small bar going across, that never finishes. I've hit escape to try and get some info, but don't know what I'm looking for and it's too much to write down. I did notice there were several I/O errors. I did check the usb for defects and it returned ok, and the md5sum was correct.
I've also tried safe settings which takes me to a blueish/black screen and stays there. No ACPI starts to load and then drops to a shell.
how to get this accomplished? I've installed many Linux OS's and I've never had this much trouble.
ps. I"ve read the "please read" pre installation page on here, and things just don't make a whole lot of sense to me.
Ubuntu Networking :: Stick On Network Manager 0.8 Doesn't Work - Restore Karmic's Version?
Feb 26, 2010I added a repo from launchpad to install latest Network Manager and then installed it (version 0.8). Then I decided to rollback to Karmic's version (since 0.8 doesn't work) but failed: I removed the repo from sources.list
Then apt-get udpate
Then apt-get clean
Then apt-get install network-manager...
But still 0.8 version is downloaded and installed! How can I restore Karmic's version?
Ubuntu Networking :: Huawei E122 Mobile Broadband HSPA USB Stick - Doesn't Show Up Under Lsusb
Feb 7, 2011I have a Huawei E122 Mobile Broadband HSPA USB Stick on three ireland. i can't get it to connect. but i think the problem might be, when i stick it in nothing happens. it doesn't show up under lsusb. i don't think it "mounts"
View 2 Replies View RelatedFedora Hardware :: Nokia CS-10 - Installation And Configuration - The Stick Doesn't Detected In The Computer
Dec 30, 2009I 've a Nokia CS-10 broadband stick (USB). I need to install and configure, and I don't know how do it. I found an article that review something like that: [URL]
1, The stick doesn't detected in the computer.
2. I made all the article steps, but shows me a error in the shell script on line 10.
OpenSUSE Hardware :: USB Stick Very Slow Copying - Taskbarpanel Notifier Doesn't Show Progressbar
Sep 11, 2010I installed openSUSE 11.3 with KDE4 on three different computers. Only one of them has the following problem: When I use my Sandisk Cruzer USB-stick (FAT32 formatted), copying is extremely slow. Also, the taskbarpanel notifier does not show a progressbar or a cancel button during copying. It only shows that is copying but I can not cancel. On the other two computers, the same stick works ok. The computer has the following mainboard: Asus M4A87TD/USB3
View 1 Replies View RelatedOpenSUSE Network :: Mobile Internet Connection - Program Doesn't Find The HUAWEI USB Stick
Aug 11, 2010I have opensuse 11.1 Gnome on Lenovo S10e. I'm wanting to establish a mobile internet connection. I have tried so far...*UMTSMON but when I click on it nothing happens. I have reinstalled the program several times to no avail. *WINE to run the Optus program, however the program doesn't find the HUAWEI USB stick & *Via a Bluetooth connection (use mobile phone as a modem) didn't work either Anyhow, I have tried these and some other ways to get mobile to no avail.
Also, have gone to network connections-mobile broadband-add-configure it- but what am I forgetting to do? Need a path I can take to get mobile internet working. (I even have a direct SIM card slot in this laptop
Ubuntu Installation :: Ndiswrapper - Ethernet Port Doesn't Work
Jul 27, 2010installing ndiswrapper. I've used Windows all my life and I just made the jump to Ubuntu a couple days ago, install native drivers for my card, but at the end of the list of like 25 packages there are 4 packages that won't install because they all say they have dependencies upon each other. Now, I'm trying ndiswrapper and I don't understand it in the least little bit... I know I'm an utter noob, but the OS seems amazing, I'd just like to connect to the internet with it. Even the ethernet port doesn't work! :/
View 1 Replies View RelatedUbuntu :: Corrupt Usb-stick - Close Gtk Button And Pulled The Stick Out Of Pc
Oct 1, 2010i was writing a .img file to my usb stick with ImageWriter, but it didn't seem to do anything so i clicked the close gtk button and pulled the stick out of my pc. now my pc gives my an when i try to open the stick. is there any way to fix this. I can use win xp pro, win xp media center, win 7 starter, ubuntu 9.10 and ubuntu 10.04
View 5 Replies View RelatedUbuntu :: 11.04 Won't Recognise Mp3 Player
May 24, 2011I upgraded from 10.10. Prior to that I never had a problem plugging in my player. Someone suggested that the upgrade is buggy and I should install from a cd. Before I do that, are there steps I can take to resolve this?
View 9 Replies View RelatedUbuntu :: Powerbook G4 Wifi Driver, Ethernet Port Doesn't Work
Sep 21, 2010I just installed Ubuntu 10.04 on my Powerbook G4 1.5ghz 15", and the ethernet port on the laptop doesn't work. So I can't search for drivers to install.
Is there a way to either tether internet to the laptop using firewire? find the necessary drivers so I can transfer them?
Ubuntu Servers :: Installing Server From USB Stick To Another USB Stick?
Sep 1, 2011I'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
View 8 Replies View RelatedHardware :: 10.04, USB 3.0 Port Fresco FL1000G Doesn't Work?
Feb 2, 2011i have a mainboard asrock 880gmh/usb 3.0 with ubuntu 10.04 but the usb 3.0 port doesnt' work.
MY PC:
Distributition: *ubuntu
version: 10.04
Desktop environment: GNOME
Info: CPU: Amd Athlon II X4 645 3.10 GHZ Socket AM3
RAM: 4 Gbyte DDR3 1600 Mhz HD: 2 Western Digital Sata 500GB 32MB WD5000AADS
Video Card: Ati HD 4250
[Code]...
General :: Bios Doesn't Support Booting Up From Usb Port
Nov 24, 2010I'm about to install the Smart Boot Manager rpm so that I will be able to boot from my usb. My bios doesn't support booting up from the usb port. Will this cause conflict with grub?I currently have Fedora 14 installed and about to install CentOS 5.5.
View 10 Replies View RelatedFedora Networking :: Port Redirect, I.e. Whatever Comes Through Whatever Interface On Port AAAA Will Get Redirected To Port BBBB?
Feb 18, 2010I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
Ubuntu :: Can't Mount / Won't Recognise Blank CD-R?
Nov 11, 2010I've searched the forums and found several posts for similar problems but haven't yet found a solution to my problem.I first realised something was wrong when I attempted to burn a CD using Brasero. Brasero said "please replace the disc with a supported CD or DVD". I tried using K3b, Gnome Baker, Gnome CD Master and encountered the same problem every time - they didn't recognise the blank CD-R in the drive.In Gnome Baker I opened Edit => Preferences => Devices and discovered that only one of my CD drives is listed with a mount point. The CD-R drive (the one I need to burn CDs) doesn't have a mount point.I tried using fstab to alter this by entering a new line so that it now reads:
/dev/scd1 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
[code]....
General :: Ubuntu 11.04 Wont Recognise
Jul 1, 2011Have installed a Brother HL-2132 however Ubuntu 11.04 wont recognise, even as I have start up disk? any ideas, it is runnng ok on windows which is on another hdd on the same PC, maybe I can link to there?
View 3 Replies View RelatedNetworking :: "wireless Repeater" - Plug-in A Linksys USB Stick Doesn't Work
Mar 13, 2010I have a DSL modem with four ports and a built-in wireless router downstairs. It works great: I have wired Ethernet for my PCs downstairs (all plugged in directly to the DSL modem); my son has great wireless access upstairs (using the built-in wireless in his laptop). PROBLEM: I want to add another, desktop, PC upstairs. I've been trying to use wireless, with a plug-in a Linksys USB stick. It doesn't work worth crap.
I'm considering a) getting another phone jack upstairs, and moving my DSL modem there, or b) stringing some CAT-5 cable from the modem downstairs to the PC upstairs. Putting a wireless PCI card in my upstairs desktop PC might also solve the problem, but the PC only has one PCI slot, and I'd rather keep it free, if at all possible.
QUESTION: Is there any kind of "wireless repeater", where I can a) get wireless access from my DSL modem/wireless base station downstairs, and b) give me some spare Ethernet ports, so I can plug in desktop PC (so the PC can have a wired Ethernet connection)? POSSIBLE SOLUTION: I have an old Linksys WRT54G router that I'm not using. Q: Is there any way to configure it for this purpose? Q: Would it be possible to use it for this purpose if I installed OpenWRT?
Ubuntu :: Laptop Not Recognise The Belkin Adapter?
Sep 14, 2010I've had a quick Google around, but everything I find seems to be a bit out of date (from over 2 years ago). I'm running Ubuntu 10.04 and have tried to use a Belkin N USB Wireless adapter but it doesn't recognise it, nor can I find any drivers. Is there a way to get the laptop to recognise the Belkin adapter?
View 9 Replies View RelatedRed Hat / Fedora :: Enabling Mysql In Server (port 3306) It Doesn't Work?
Apr 12, 2011when i am enabling mysql in server (port 3306) it does'nt work. but when i execute iptables -F it works what may be the reson?
View 6 Replies View Related
