Ubuntu Installation :: 10.04 Installer Doesn't See Windows 7?
Oct 26, 2010
I've searched the forums, internet, etc... and I can't seem to find anything on this. I installed Windows 7 using ~70% of my available hard drive space, the other 30% is unallocated. there are two partitions, the 100MB 'System' partition and the NTFS one with Windows 7.
On my first attempt to install Ubuntu: The partitions didn't look right. It detected two NTFS partitions, the first one of 100MB, and a second NTFS partition using ~30% of my hard drive, and 70% (presumably Windows) as unallocated. I decided to go ahead and try to install it over the 30% NTFS partition thinking that maybe the installer just didn't recognize the free space right or something, but after that happened, Nothing loaded and my Windows partition was trashed.
I wiped the drive, and reinstalled Windows again with the 70/30 split. On my second attempt to install Ubuntu: On step 4 of the installation process (partitions) it doesn't detect my Windows 7 installation at all. Instead, it says the disk is 100% unallocated.
Does anyone know why the Ubuntu Installer is not detecting my Windows partition correctly? If so, how can I go about getting Ubuntu to see it and install itself along side Windows?
View 7 Replies
ADVERTISEMENT
Apr 6, 2010
I recently did a fresh install of Windows 7 on my laptop, then shrunk my partition and set aside some free space for Ubuntu. When I went to install Ubuntu, however, it told me that no operating systems had been detected on the system. I ignored this message and just installed Ubuntu on the free space, but when the installation was finished, GRUB failed to recognize Windows 7 as well and would only boot into Ubuntu.
After several attempts at getting GRUB to see W7, I eventually gave up and used my W7 CD to reinstall the Windows bootloader which, naturally, didn't detect Ubuntu and would only allow me to boot Windows.
I've tried messing around with my Windows partition a bit, but no matter what configuration I use, I can't seem to get the Karmic installer to see it. I've resorted to using WUBI for now, but I'd really like to have Ubuntu on its own partition in case something goes wrong with Windows; plus, I'd love to be able to use ext4 and GRUB. Anybody know how I can get around this issue?
I've used the same install CD on several other machines with Windows 7 and it recognized them just fine. It's only this one computer that's having the issue.
View 2 Replies
View Related
Jan 8, 2010
I'm trying to set up a dual boot of Ubuntu & Windows XP.I have two hard disks installed - sda is 80GB and has an existing Windows setup on it, sdb is my 160GB data storage disk.When I have installed Ubuntu on other machines, it has detected any exisiting OS's and offered to install Ubuntu alongside them.
However, this time Windows doesn't seem to be detected - it says 'no other operating systems found' and wants to install to my second (i.e. sdb) disk. I was intending for Ubuntu & Windows to sit side-by-side on the first hard disk.Although I've installed Ubuntu before, I'm a bit of a novice and I'm not sure how to achieve this - where am I going wrong?
View 4 Replies
View Related
Dec 9, 2010
I downloaded wubi.exe from Opera 10.61. The file downloads ok, but then refuses to do anything when I click on the file.
I also switched to my IE version, and tried to run the file from there. Again, I get the hourglass symbol for a couple of seconds, then nothing.
I'm running Windows 98. I know, I should have a newer version, but finances can't manage that right now. In the meantime, is there a manual way to run the installer for wubi and get it to work?
View 2 Replies
View Related
Feb 16, 2011
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
View 9 Replies
View Related
Feb 24, 2011
I have trouble installing ubuntu on my desktop machine. I had Mint before, reinstalled Win7 and wanted to upgrade to newest release as I didn't use Linux for some time.
Basically fdisk can see the disk but installer don't
View 5 Replies
View Related
May 5, 2010
When trying to install Ubuntu 10.04 desktop from USB pendrive I can't see the sda partitions in the manual partition editor.I have a dual boot PC with Windows XP Pro and Ubuntu 8.10 running (see below for more details). Using the 10.04 Ubuntu desktop edition on a USB stick (pendrivelinux), I can boot without a problem and everything works fine: mount/unmount of all my drives, read data, etc. But I can't install the 10.04!When running the installer, at the point where the partition is selected, I choose "manual" as option. On the next screen I only see the drives/partitions starting from /dev/sdb1... to sde, but NOT /dev/sda. The "Add" button is greyed out, I can only edit the existing partitions. When I edit and press forward I get an error telling me that the SWAP partition is missing. I already HAVE a swap on sda.
I also tried booting Ubuntu 10.04 and then running the installer - no difference. I also remove the plug from one of the drives (sde) - still the installer doesn't show me sda.I would like to install 10.04 without messing up my Windows XP Pro and without messing up my /home partition or any other partitions that are non-Ubuntu stuff.In former years this used to be the easiest part, now it looks like a challenge. Any help is appreciated. System and background info:Hardware: Desktop PC with Intel Core 2, Nvidia graphics card, 5 SATA hard drives hooked to Gigabyte mother board, two network cards (only one in use)Current OSes: Windows XP Pro on sda1, Ubuntu 8.10 on sda and sdb
View 9 Replies
View Related
May 10, 2010
When I tried to install Ubuntu 9.10 or 10.04 (from CD or USB drive), and selected manual partitioning, the installer would not show all my drives.
However, when booting the life CD/USB, gparted or the Disk Utility did recognize all drives and partitions.
It turned out that one of my drives was marked as RAID partition, although I never used RAID!
Here the symptom:
When you run the installer and select "manual partitioning", the resulting list of drives and partitions is incomplete. In my example it was:
sda
- sda1
sdc
- sdc1
[Code]....
You may have multiple drives with the RAID metadata on it. In that case you need to repeat the above command for all those drives. Just make sure you don't wipe out your existing RAID, if you have one.
Reboot the system and see if it works.
P.S.: Also check your BIOS settings - do you have drives configured as RAID?
View 5 Replies
View Related
May 22, 2010
I'm trying to install ubuntu 10.04 on an old computer, but the installer doesn't have any listed partitions and I can't go any further. The hard drive I'm trying to install it to was just formated in Windows 7, it's a clean hard drive. Uh, how am I supposed to install it?
View 1 Replies
View Related
Jun 6, 2010
20GB Laptop HDD in external enclosure with USB interface. Formatted FAT32. Shows up in Windows as E:. The Universal USB Installer, however does not see the drive. Is that app only set to look for a true USB flash drive and I'm just doing it wrong?
View 8 Replies
View Related
Apr 9, 2011
I've been trying to install Ubuntu 10.10 on my custom built AMD Athlon FX-53 system to use as a web server. I downloaded the AMD64 desktop version and whenever I boot to the CD it'll go through the loading screen, bring up the install background and then the mouse cursor will appear. After that the mouse cursor keeps switching between the loading one and the regular one and it never fully loads the installer.
The system specs are:
AMD Athlon FX-53 @ 2.4 GHz (Stock)
1 Gb OCZ PC-3200 ram (2x512)
PNY Verto FX5200
Western Digital 40 Gb IDE hard drive
based off an Asus SK8V motherboard (Skate 5 to me...)
I was able to install the 32-bit version and I've tried 2 burns, one on a CD-RW and one on a CD-R and the checksum is the correct one based on whats posted on the site.
View 1 Replies
View Related
Feb 16, 2010
I am about to make a fresh install of ubuntu 9.10 on my 160gb hdd and keep my home directory. Here I also have Windows XP installed, the swap, home and root. All of these are done manually and given names such as 'sda1', 'sda5' ect.(I do see them in system monitor > file systems) The problem is that the installer doesn't seem to show me these tables. I only get a 160gb big chunk. GParted will not show it either (but as root is running from their I guess it cant?).
View 6 Replies
View Related
Apr 17, 2011
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
View 2 Replies
View Related
Mar 21, 2011
I'm trying to install DropBox so that the 'DropBox' folder gets placed in /dev/sda4 which is a spare ext4 partition on my disk. Root is /dev/sda1, swap is /dev/sda2 and home is /dev/sda3.
The DropBox installer does not show /dev/sda4 as a location to install it to in the 'Location' drop-down selector.
In Dolphin, the /dev/sda4 partition appears as '19.7 Gib Hard Drive'.
Do I need to do something to make /dev/sda4 accessible to the DropBox installer?
View 4 Replies
View Related
Dec 19, 2010
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
View 14 Replies
View Related
Oct 13, 2010
I have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code:
jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda
Disco /dev/sda: 250.1 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
[Code]....
View 2 Replies
View Related
Jan 12, 2011
I have a Ubuntu 10.10 live cd for 32-bit. However it does not work with my system--I am guessing it has something to do with having more than 4 gigs of ram.
Anyway I am wondering if there is a way to install ubuntu 10.10 64-bit with Windows 7 64-bit.
View 4 Replies
View Related
Jul 8, 2009
I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
View 2 Replies
View Related
Mar 21, 2010
I use to have vista and ubuntu on my PC. Yesterday accidentally I created a new partition "table" the point is that I erased all my partitions on "MyDisk". After a while I decided to re-install ubuntu ( 9.10 karmic koala ) and take advantage of the situation and upgrade to Windows7. Since I already had the ubuntu cd, I installed it first, then downloaded the Win7 cd to install it. The problem is that Windows7 installer doesn't load.
All I get is:
<<BLACK SCREEN>>
Grub loading.
<<BLACK SCREEN>>
underscore
Ubuntu logo
ubuntu login
So I don't know whats wrong. Right now my disk looks like this:
MyDisk >
MyDisk1 ntfs ( For windows 7 )
MyDisk2 > extended (using linux with 2 more partitions: ext4 and linux-swap)
View 9 Replies
View Related
Aug 11, 2011
I'm trying to install Ubuntu 11.04 alongside Windows 7, but when I boot from the CD, Ubuntu refuses to detect the presence of Windows 7. I tried unplugging all my external hard drives to see if that made a difference, but Ubuntu still can't tell that I have Windows 7 on there.
View 4 Replies
View Related
Dec 7, 2010
I just installed ubuntu via the windows installer. When I try to boot it, it comes up a cmd line and gives me some choices of boot/grub... and boot/disk/... they all lead back to the cmd line except the boot/disk option which leads to a message saying that it cant find the disk...
View 1 Replies
View Related
Feb 4, 2011
I have downloaded ubuntu cd from bit torrent. Unfortunately my dvd rom is not working now. So i have decided to use windows installer. Can you give me any idea how to link this ubuntu which i have already downloaded from bit torrent?
(ubuntu-10.10-alternate-amd64.iso) - downloaded
View 3 Replies
View Related
Oct 7, 2009
I currently run windows 7, I am interested in dual booting, upon burning the .iso to the disc using imgburn, I had a few problems with the installer when I ran the live disc, I'll assume it was personal causes, I googled several things for a simple solution, I went with using the Disk Manager in Windows 7 to shrink my current partition which I only have one which is running Win 7 on 140 GB's, using the shrink function in windows I unallocated 20 GB of that partition, I used this option because the option in F11's installer would not work at all. I rebooted from disc, loading the distro, and run the installer via desktop choose the use free space option and I got an error crash when it tries to execute this option which isnt the only time I got this error bug causing me to exit the installer, I copied the debug information in the details, I hope this is something simple because F11 isn't worth this much time.
Code:
01:08:53 DEBUG : DeviceTree.handleUdevDeviceFormat: name: sda1 ;
01:08:55 DEBUG : NTFS.supported: supported: False ;
01:08:55 DEBUG : PartitionDevice._setFormat: sda1 ;
01:08:55 DEBUG : PartitionDevice._setFormat: sda1 ; current: None ; type: ntfs ;
01:08:55 DEBUG : DeviceTree.addUdevDevice: name: sda2 ;
[Code]...
View 8 Replies
View Related
Aug 2, 2010
where do I find an application for windows installer package files?
View 3 Replies
View Related
Nov 5, 2010
My daughter tried to create a bootable USB-stick version of ubuntu by following the steps on this site, which included using the "universal USB installer" utility from pendrivelinux.com. She was on a windows notebook (I don't know which version, probably XP), and had saved the .iso to the desktop.She's generally pretty good about following directions, but now, with no CD or USB stick in place, the windows machine HD boots directly into the installer "Try ubuntu or Install ubuntu" screen, with no trace of windows! Naturally, her SO (it's his work machine) is more than a little upset.
View 6 Replies
View Related
Feb 1, 2011
I want to download and install Ubuntu to run alongside Windows 7 in a dual boot configuration. and downloaded the Windows Installer, but when I try to launch it I get an error message which I captured and attached to this post. What's really wierd is that once the message is displayed, I can't get rid of it. Even running the Task Manager to try to close the message doesn't work. I literally have to restart the computer to get rid of the message!
Am I suppose to be downloading the Windows Installer (Wubi) to a CD first where I run it from there? If so, the instructions don't mention that. Can't I download it directly to my C: drive and then run it from there? If so, why am I getting the error message?
View 9 Replies
View Related
Oct 13, 2010
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
View 12 Replies
View Related
May 3, 2010
I have three physical drives:
Drive 0: Used for paging file in windows and general temp file storage
Drive 1: Media storage
Drive 2: Windows installation
When booting off the Ubuntu 10.04 disc and running the installer, it gets up to the partition step and doesn't find my Windows installation (for the automatic partitioning and such) and lists Drive 0 as the drive it will install to. I really want it to see my Windows install and create a partition on that same drive. Can anyone help me in getting the installer to see the Windows installation?
View 5 Replies
View Related
Aug 26, 2010
I tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"
View 9 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
