Ubuntu Installation :: No Boot Manager After Installing On Usb Hard Disk
Aug 9, 2011
I saved wubi.exe to c: and when running wubi, I pointed it to my usb hard drive for installation of ubuntu. When I rebooted my PC, I got a message that there was no boot manager. Even cntl-alt-delete did not work, so I unplugged the pwr cord and battery and reconnected them. I interrupted the boot to get to BIOS and found that Ubuntu was first in the boot chain. Apparently, when it is, no boot manager is found. So I removed the usb from the pc and was able to boot into W7.
View 5 Replies
ADVERTISEMENT
Apr 8, 2009
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies
View Related
Apr 9, 2009
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies
View Related
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Sep 26, 2010
This afternoon I finally had the time to run this Ubuntu KK CD and load over my old xp/Jaunty J partition. I had previously run the distro. through the CD, without harming my old partition. On doing so the system consistently reported my Toshiba ATA 120 gig hard disk had multiple bad sectors and was failing. As a true end user (who mucks only when necessary with the CLI) I just figured writing over the partition would end the failure. To be sure I ran Memtest8.66 v2.11 from the LiveCD; everything checked out fine. So I installed KK.
Or was I? Why did it still have the "Install ubuntu 9.10 ISO" icon on the left hand side of the screen? How did the CD come to whir when I tried starting apps like Open Office? Something wasn't right. So I rebooted, this time from the HDD. The start up looked predictable - there's that PXE-E361 Media Test Failure on some cable, I've been staring at that since I built the dual partition. But what's this? PXE-MOF: exiting EXE ROM. Huh? Oh and then the letter j..
This is a Toshiba Satellite A105 with a 200 gH 1gig Pentium M. When I boot the liveCD I get this trial environment that works fine. When I try installing from it I can even see that I'm writing over the previous, whole 9.10 partition I created this afternoon. Regardless when I boot from HDD I get that weird letter j..
I've checked on line for boot issues, and the forum too, but so far haven't seen an issue booting from the HDD, especially when the distro. is already loaded. What am I missing here, and how do I install it from a live CD environment?
View 9 Replies
View Related
Sep 23, 2010
I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies
View Related
Apr 15, 2010
I originally had windows vista on my pc and then I installed ubuntu on a partition, then I decided that I wanted ubuntu to be installed on my external hard drive so that it can be run on any computer, so I installed linux on my external hard drive then I deleted the linux partitions on my internal hard drive, then to further complicate thing I decided that I wanted grub un-installed because it ran slow when reading off of a external hard drive and just use dell's normal boot selector so I inserted my vista cd and ran /fixmbr and /fixboot which deleted GRUB and returned the default booting into vista, now my problem is that when I try to run linux by using dell's boot devices options It won't run and says that 'there is no boot manager installed'. Is it possible to have ubuntu on a external hard drive so that it can be booted from any computer? if so, how can I do it?
View 4 Replies
View Related
Mar 30, 2010
I want to install ubuntu 9.10 DVD, I have the iso image, so i try to boot the installer from hard disk by adding this lines to my menu.lst.
Code:
title Install Ubuntu
kernel (hd0,0)/install-ubuntu/vmlinuz
[code]...
View 9 Replies
View Related
Oct 31, 2010
I have installed Kubuntu on external WD HDD , it does NOT boot on this laptop but works on couple of other laptops , attached is the results txt output of the boot_info...sh.I can boot with USB flash drive that has kubuntu live Cd image when I use the external HDD ,it gives a blinking cursor only
View 9 Replies
View Related
Feb 15, 2011
after my upgrades i noticed one hard drive was acting funny i was gonna reformat the drive anyway to totally remove winblows from my system grub was installed on the boot sector of the drive that failed how can i get the next drive in line to boot if some one can get me to a howto or tell me what i need to do short there of reinstalling the operating system.
View 5 Replies
View Related
May 9, 2011
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
View 9 Replies
View Related
May 25, 2011
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
View 14 Replies
View Related
Mar 19, 2010
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
View 5 Replies
View Related
Feb 17, 2010
I have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
View 9 Replies
View Related
Jun 7, 2011
i started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
View 6 Replies
View Related
May 8, 2011
I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.
However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.
Here are my directory structures:
debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.
menuentry "Debian 6.01 Live (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root=(hd0,msdos1)
[code]....
Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.
View 8 Replies
View Related
Mar 9, 2011
I have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?
View 7 Replies
View Related
Jul 9, 2010
I burned a Fedora ISO onto a CD and I love it. Now, I want to add it as a dual-boot to my hard disk. I divided Drive C into two (formatted) partitions one labeled Linux.During an attemped installation, I was able to find (thru "edit") the partition called "Linux." But one of the next questions threw me: it asked for a "mount point."I have no idea what that means (and yes I have readthe guide onthis site).
ACTUALLY... what I need to do is simply install into a partition I already set up.I don't find an option for that within the Fedora installation menu.I have 20 years of experience with Windows and try to keep up with everything, but Linux is totally new to me, so I don't understand the terminology.I also have been trying to find how to create a dual-boot situation from the hard disk, where XP is still my default (for now, at least).
View 12 Replies
View Related
Dec 29, 2010
I'm not a stranger to Ubuntu Linux and I was using it for a couple of months with no problems until last week when I turned my computer on and it would go no further than the boot screen and it said 'Error- Insert System Disk'. So I inserted the system disk (Ubuntu Linux 10.something) and after waiting 10 minutes for it to load up it said 'Installation failed, desktop session will now be run and you can try installing again'. So I tried installing whilst on a desktop session and I eventually got to step 4 of 8 and it lets me go no further. This is what step 4 of 8 is:http://oi54.tinypic.com/mx2g79.jpg
And so I cant choose any disks or partitions and so it wont let me go any further. How do I create one? I'm currently running on desktop sessions and they take forever to load up and I cant watch videos or anything because there is no flash. By the way please try and explain to me really simply because I am quite dopey and I wont be able to understand posh complicated computer words.
View 9 Replies
View Related
Nov 28, 2010
My current partition is:
I have Fedora 14 installed. I'm trying to install CentOS 5.5 from the hard disk. I copied the seven part iso to the /iso. I didn't create a directory in the /iso. I ran the md5sum on the seven parts and compared it with the md5sum that is provided on the website and they are all identical.
When I tried to install from the hard problem, the first thing is instead of sda1,2,3,5 I found the following options:
well, I selected /dev/hda2 and left the directory blank. The images can't be found. What am I doing wrong? And why is the difference between sda in the partition and hda in the installation?
View 7 Replies
View Related
Sep 18, 2010
I want to install knoppix on my hard disk of my netbook, I did manage to boot knoppix from usb to a live session. But when I try to install it, it says my hard disk does not have a compatible partion table or something.
check this link:
[URL]
View 5 Replies
View Related
Jun 15, 2011
I have an Acer aspire 1551 notebook Ubuntu worked fine until now. It will not boot. It boots until the music sounds, and the login screen is supposed to appear, then it just locks up. The strange part is that both the installed version and the USB ubuntu live version fail at the same point. I even tried two versions of Ubuntu live on USB. Windows 7 however works fine. I think something must have happened to the hardware That will not load ubuntu,but will load windows About the only thing I did different on my last session was to install wine and then install Textpad in wine.
View 2 Replies
View Related
May 14, 2010
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies
View Related
Mar 15, 2009
I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
View 14 Replies
View Related
Jun 21, 2011
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
View 6 Replies
View Related
Aug 21, 2010
I installed an OS on the second hard-disk/partition3 (/dev/sdb3; OS was FreeBSD). Added the entry and when i boot: nothing. I choose the OS from grub's menu, the list of choices vanishes, the background image stays, and there it hangs. It hangs until i hit: ctrl+alt+backspace. I have thought: to hell with it, and installed Debian/Lenny. Same problem (OH!).
I also installed the boot-loader to the second disk (/dev/sdb), hit F11 after the BIOS-screen and chosen the second hard-disk to boot from: a similar problem. It hangs, and the keyboard is "dead". I am clueless what to check for (i checked the general culprits, but with UUID its all a bit of a mess. I would say it looks good, but wouldn't bet on it) Anyone ever heard of something like that? Without error message its not easy to use the amazing Google. I do a bit of grub-troubleshooting, usually it works, but usually i get error-messages.
I made two threads about it, in case they contain useful info, here they are:
http://www.linuxquestions.org/questions ... sd-827059/
http://forums.freebsd.org/showthread.php?t=17021
View 14 Replies
View Related
May 29, 2011
I'd like to move my existing Ubuntu installation from my hard disk (/dev/sda1) to a USB stick. How do I copy the data from HD to USB? dd is obviously not the right option since the HD is 320GB and the USB stick only 16GB. However, only 3.5GB are used so this makes perfect sense.And it would make my HTPC even more silent |-)
View 1 Replies
View Related
Apr 24, 2011
Acer Travelmate laptop, 1.3GHz Pentium M, 12MB Ram.pensuse 11.4 (upgraded from 11.3)Vanilla install, not running anything special, always startup and shutdown from scratch, never sleepFor several minutes after KDE appears and I open an app (any app, e.g. Chrome) the hard disk is going nuts. WTF is it doing and how do I stop it? Also some programs take years to start, e.g. digicam took TEN minutes the other day even after waiting a while after booting, the disk thrashing the whole time. But in 11.3 it started almost instantly.
View 9 Replies
View Related
May 17, 2010
How to boot an iso image from hard disk. I have created a linux live cd with remastersys. I want to test it. So I want to boot it from my hard disk.
View 3 Replies
View Related
Aug 17, 2010
I am having 2 Hard Disk 1 is having RHEL 5 Installed And 2nd is having Windows XP, now i want to dual boot my PC with the help of this two Hard Disk? Can i Dual Boot with RHEL & Win XP having Installed in 2 different HD? what is the Procedure?
View 4 Replies
View Related
