Ubuntu Installation :: Re-installing XP With A Two Disk Dual Boot ?
Feb 17, 2010
I have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code: Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
I killed Win XP awhile back, but there are a couple games I need to format for Ubuntu to use, using XP to get there.
I have Ubuntu LTR. I formatted disk to install XP. I installed XP. I can't boot into Ubuntu anymore unless from a live CD. From Live CD, I can see my Ubuntu is still there, but from XP, disk manager it shows that space as empty (free). How can I dual boot, now? Please don't tell me I need to reinstall Ubuntu, I may cry. Any help is appreciated and my apologies if my search didn't get me the answers, the other similar problems I saw were in reverse order (Linux onto drive after XP).
When I split the partition in my windows system, my harddisk was converted to Dynamic Disk. Now I want to install dual-boot with Ubuntu on my computer, is it do-able? How?
I am building a new PC from scratch and want to dual boot XP and Ubuntu. I have two 1TB drives. I was planning to run RAID 1, whereby one drive would mirror the other drive, and install XP, Ubuntu, and all data on the single drive. Now Im thinking maybe I should reserve the 1TB drive for data and install two smaller drives, one to hold XP and one to hold Ubuntu and their respective programs. In this latter config, the OS and programs would not be mirrored. Im new to dual booting and linux.
I recently made the move from windows to Linux and I am happy to having got rid off all the MS stuff. Trying out a few distros I decided on using Ubuntu and Mandriva (wife likes the flashier stuff, what can I say ).
My question is how can I partition my hard disk in such a way that my /home is separate from both the Ubuntu and Mandriva part but accessed by both as my default home folder.
How to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
I've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.
To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.
However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has: /dev/sda5 for /boot /dev/sda6 for /
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code: There are a total of 2 entries listed in the Vista Bootloader. Bootloader Timeout: 30 seconds. Default OS: Linux Mint 7
Entry #1 Name: Microsoft Windows Vista BCD ID: {current} Drive: C: Bootloader Path: Windowssystem32winload.exe Windows Directory: Windows
Entry #2 Name: Linux Mint 7 BCD ID: {default} Drive: C: Bootloader Path: NST st_grub.mbr
Windows Boot Loader identifier {3fb6bf63-700d-11db-8409-0016d303c867} device partition=C: path Windowssystem32winload.exe description Microsoft Windows Vista locale en-US inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d} recoveryenabled Yes osdevice partition=C: systemroot Windows resumeobject {3fb6bf64-700d-11db-8409-0016d303c867} nx OptIn
Real-mode Boot Sector identifier {bbf9569e-31e5-11df-a844-91f7867d7949} device partition=C: path NST st_grub.mbr description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
I installed Lucid Lynx on a dual boot with a previously installed copy of Windows 7 and everything installed fine via Wubi...but now when I boot up and I get to my Boot Mgr and select Ubuntu I get the following message and can not get past a black screen stating -
Try (hd0,0) EXT2
I have tried to read what others have done to fix this but nothing has worked so far,Also I can still log into Windows 7 just fine, just no Linux...
how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
i started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
I have a DOS/Linux dual-boot system. After recently replacing the original motherboard (an Elitegroup P6VEM3, of all things!) with a salvaged Dell D300 motherboard, I'm preparing to replace the Red Hat 8 currently installed with a Ubuntu live CD that I've had for some time (but that wouldn't work at all on the old motherboard, for some reason) I have a question about the "partitioner" stage of the installer: I don't know what to do with my 5 DOS volumes. My hard drive is partitioned as follows (from the partitioner's report when I select manual mode; annotations in parentheses):
My dell machine has the following: A raid 0 SAS config with Windows 7 installed in one partition, and ubuntu in the other partition. Then two seperate sata hdd. The raid drive is set as first boot, and Windows views it as disk 0 and boots just fine. When I installed ubuntu 10.04 on the second partition, it viewed the disk as sdc. And when booting off the raid drive,im not given a grub menu to choose ubuntu orwin 7,windows 7 boots all on its own.
I have a desktop Windows PC with three hard drives. Having successfully installed Ubuntu on a laptop I used the same CD image to boot Ubuntu on my desktop machine. All seemed well so I selected the option to install alongside the existing OS. I left the choice of drive as presented by the installer (it was the largest one) and asked for an 80G partition for Ubuntu. The installation went well but when the machine was restarted it just booted straight into Windows. No sign of the bootloader menu. I'm guessing the BIOS doesn't look at the drive where Ubuntu is installed, and the installer did not put the bootloader on the Windows boot drive. The Windows drive is too small to install Ubuntu there.How do I fix this so that I can dual boot, or alternatively how do I get rid of Ubuntu and reclaim the 80G for Windows?
I saved wubi.exe to c: and when running wubi, I pointed it to my usb hard drive for installation of ubuntu. When I rebooted my PC, I got a message that there was no boot manager. Even cntl-alt-delete did not work, so I unplugged the pwr cord and battery and reconnected them. I interrupted the boot to get to BIOS and found that Ubuntu was first in the boot chain. Apparently, when it is, no boot manager is found. So I removed the usb from the pc and was able to boot into W7.
I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
I installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as
Fedora(2.6.27.9-159.fc10.i686) Fedora(2.6.27.5-117.fc10.i686) Other
The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.
I have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
Dell 600SC running an Adaptec 39160 dual channel SCSI controller which has 2 disks connected to it. The machine also has 2 IDE drives connected to it. The boot order of the disks is set to the SCSI disks as the first in boot order (after CD).
I am trying to set it to maximize performance from the SCSI config so I have XP on the first SCSI and I set up Ub 9.1 on the second SCSI in a dual-boot configuration.
In this set up the machine when rebooting goes straight to XP (on the first SCSI) and does not even see the Ub installation. The installation went fine and no complaints. On the same machine if I just had Ub on the first SCSI - machine boots fine (albeit after a long pause looking for the bootloader).
So with XP on the first disk (which I need to - to have XP) the Ub bootloader does not seem to set the right params to be able to boot.
Again this is with 9.1. Not trying 10.04 as with 10.04 I don't even get to boot even with standalone Ub (with no XP). However it installs fine but does not find bootloader in 10.4, so we will keep to the 9.1 for now. I am however open to working with 10.04 if there is a solution in dual-boot with XP in my config.
So again 9.1 installs fine with XP on 1st SCSI disk, an ub 9.1 on 2nd SCSI disk, but then bootloader does not get activated and machine goes straight to XP.
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
I have Windows 7 on my laptop and am attempting to install Ubuntu 11.04 from CD.I boot from the disk drive, follow the prompts and eventually get to the screen where I can set how much space I want to give to the Ubuntu partition vs the Windows partition. My hard disk is 250GB, so I reduce the Windows one to 100GB (currently has 80GB of files on it) and set the Ubuntu one to 130GB (the other 20GB is split between the two hidden Windows 7 partitions).
I then click to continue and the progress bar for the install starts up but doesn't move, it just sits at 0%. I realised that the dialogue box underneath the progress bar can still be expanded and asks me to test using -n and -s, but when I type either of these into the box and hit return, nothing happens. I have checked my download of the .iso I used using WinMD5Sum and the hash matches up. I have already tried installing from USB but this threw an error, hence using CD. My laptop is a Dell Inspiron 1546 running Win 7 Home Premium 64 bit Processor: AMD Turion X2 Dual-Core Mobile RM-75 2.20GHz
I was going to go ahead and intall Ubuntu 10.10 on my Windows XP w/sp3 Machine for a dual-boot config. I've done this before without issues but want to see what setup is Optimal giving my current disk drives.Here's my current setup in this picture. You can see I have my windows on Disk0 C: and the other 38GB on this drive Unallocated.
My other 80GB drive has Two 40GB windows file systems but I could erase one of those (Disk I to install Ubuntu on. Does it really matter? From what I recall Grub takes over fine and manages the boot. Thanks for any tips before install. Should I install on Unallocated on Disk0 or free up unallocated space on Disk1 for Install? thx
I have Ubuntu on my PC. I have found a hard disk with XP on it and put it in the PC because I wanted to make a dual boot configuration. I've already modified menu.lst. The problem is that when I choose from grub menu to start XP, it shows 'Starting up ...' and nothing happens. If I choose to boot ubuntu (sda), it boots ok. Well this happens if in BIOS boot priority is given to ubuntu' hard disk. If it's given to hard disk with XP on it (sdb), it loads normally (from its own mbr) but obviously there's no dual boot option.
I added this at the end of menu.lst: titleMicrosoft Windows XP rootnoverify(hd1,0) savedefault makeactive chainloader+1
How can I make an operating dual boot configuration?
