I'd like to move my existing Ubuntu installation from my hard disk (/dev/sda1) to a USB stick. How do I copy the data from HD to USB? dd is obviously not the right option since the HD is 320GB and the USB stick only 16GB. However, only 3.5GB are used so this makes perfect sense.And it would make my HTPC even more silent |-)
View 1 RepliesI have a broken DVD drive and no others available right now to burn a DVD iso to so I'd like to use a empty hard disk instead.
I've tried Unetbootin but that only copies a few megabytes of files - the rest of the image data in the ISO is ignored.
I have verified the ISO is valid and working with VirtualBox. It's MD5 hash is also as expected. But I need to boot at the real bios not an emulated one.
I've also tried things like:
sudo cat /disk/image.iso > /dev/sdb1
and that got "Permission denied" -
I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedCopy of IBM Server hard disk data to Another USB External Hard disk?
View 2 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.
i have an old copy machine (canon gp225). the hard disk makes a whistling noise and i suppose it is just a question of time when it will bust.i do have some stone-aged computers here and i think i could use one of this hard disks as a replacement.how do i get the operating system (probably unix/linux or similar) plus the content of the boot sector plus the software on this new hard disk? i think if i could do a one-to-one copy i might have a chance that i could replace the old hard disk and it will work.
View 2 Replies View RelatedI am unable to copy video cds on my hard disk.yet they play in xine,the cds are in ISO9660 format and i am using 10.04 lucidlynx(gnome).
View 9 Replies View RelatedI just bought a new 2 TB hard disk to replace my old 175 gig one. I currently am dual-booting Lucid Lynx and Windows 7, and rather than go through the process of reinstalling both, then reinstalling all my programs, settings, and everything, I was wondering if there's a way I can just copy the partitions on my 175 GB disk to the new one, grow them to fill up the rest of the free space on the new 2 TB disk, and then plug that HD into the primary master plug on my motherboard... will that work?
View 4 Replies View RelatedI just received Phil Mickelson's "Secrets of the Short Game" DVD but it keeps stopping when I play it on either my PC's DVD drive or an external DVD drive - using VLC.Is there a software that will allow me to copy and play it from my hard disk?I tried a simple Dolphin copy but that stops as well.Is there something that I am missing?Also, it will not play on my DVD player - it just keeps ejecting it
View 14 Replies View RelatedAfter I burn the DVD image, I put the disc on the computer and boot. The installation screen appears, the acknowledgement screen appears, then the installation checks my system and gives me a yast window with an error about something related to URLs and repositories. I cannot continue with the installation.
I am 100% new at this and thought it would be as easy as installing ubuntu (which I installed on a laptop and works flawlessly).I am trying distros and opensuse is compatible with my video card right out of the box apparently, so that's why I chose it for my desktop.Do I need to copy the dvd image to the hard disk of the computer I want to install opensuse on, and use the dvd to boot as well?
I got an USB hard disk, which is formatted in VFAT32 in window. I try to back up my file.tar to this hard disk. i got this error: writing `/media/PD03/xxx.tar': Input/output errorand the mount point is disappeared by itself.mount point: /dev/uba1the file I tar as a root... i copy the file as a root user as well.mount point info:/dev/uba1 on /media/disk type vfat (rw,noexec,nosuid,nodev,shortname=winnt,uid=500)
View 3 Replies View RelatedI have an external hard disk with lots of big files and a lot of small matlab script files .m. I would like to grab all the files inside that harddisk that have the .m extension or the *.mat file extension (both are matlab files). Of course this is a
-first-find the *.m files script and
-then copy the files into the hard disk.
What I do not know is how I can also keep the structure of the folders containing the *.m and *.mat files when I will copy them in my local hard disk. As this external hard disk contains 2TB of data it is not possible to copy all the files first and then remove the unnecessary. So I have to find and copy only the files I need but with also keeping the tree structure that the external hard disk has.
I've bought a 500GB Seagate hdd.the Current hdd carrying Debian has started showing troubles(and will have to RMA it).Can I Copy Debian to a New Ext4 Partition on the New hardddisk?What is the recommended way to mirror copy(everything)?I've last rescued this way some 4 years back using "dd".
View 10 Replies View RelatedI plan to reformat & reinstall my linux (centos).Before doing this, I got to backup my files into my USB external hard disk from Seagate (FreeAgent). The problem I faced is that I could not copy file into the hard disk even I was in root user. It prompted me that it is only read-only. I just wonder why.I have tested with my thumb drive. It worked. May I know why I could not copy file to the USB FreeAgent hard disk. Due to file system?
View 3 Replies View RelatedI have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?
View 7 Replies View RelatedI would like to use a USB flash drive as a boot disk. I have 2 hard drives. I will have Windows 7 as Drive 1 and Linux as Drive 2.I would like to not touch Drive 1 at all NO grub or other boot-loader. My old system I used a floppy drive as a boot disk.This worked if floppy was inserted: It booted grub giving me the choice of Windows(drive 1)or Linux(drive 2). I would like to replace the floppy with a USB stick. I have a couple of 64 MB (LOL) flash drives to use.
View 4 Replies View RelatedI'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies View Relatedwhat are the series of files that are called when a user make copy operation from usb mass storage to hard disk?i have reached the code of the usb mass storage in linux kernel 2.6.33 and i want the exact code the make the copy how can i do that?
View 2 Replies View Relatedafter installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI have an Acer aspire 1551 notebook Ubuntu worked fine until now. It will not boot. It boots until the music sounds, and the login screen is supposed to appear, then it just locks up. The strange part is that both the installed version and the USB ubuntu live version fail at the same point. I even tried two versions of Ubuntu live on USB. Windows 7 however works fine. I think something must have happened to the hardware That will not load ubuntu,but will load windows About the only thing I did different on my last session was to install wine and then install Textpad in wine.
View 2 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedThis afternoon I finally had the time to run this Ubuntu KK CD and load over my old xp/Jaunty J partition. I had previously run the distro. through the CD, without harming my old partition. On doing so the system consistently reported my Toshiba ATA 120 gig hard disk had multiple bad sectors and was failing. As a true end user (who mucks only when necessary with the CLI) I just figured writing over the partition would end the failure. To be sure I ran Memtest8.66 v2.11 from the LiveCD; everything checked out fine. So I installed KK.
Or was I? Why did it still have the "Install ubuntu 9.10 ISO" icon on the left hand side of the screen? How did the CD come to whir when I tried starting apps like Open Office? Something wasn't right. So I rebooted, this time from the HDD. The start up looked predictable - there's that PXE-E361 Media Test Failure on some cable, I've been staring at that since I built the dual partition. But what's this? PXE-MOF: exiting EXE ROM. Huh? Oh and then the letter j..
This is a Toshiba Satellite A105 with a 200 gH 1gig Pentium M. When I boot the liveCD I get this trial environment that works fine. When I try installing from it I can even see that I'm writing over the previous, whole 9.10 partition I created this afternoon. Regardless when I boot from HDD I get that weird letter j..
I've checked on line for boot issues, and the forum too, but so far haven't seen an issue booting from the HDD, especially when the distro. is already loaded. What am I missing here, and how do I install it from a live CD environment?
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
I installed an OS on the second hard-disk/partition3 (/dev/sdb3; OS was FreeBSD). Added the entry and when i boot: nothing. I choose the OS from grub's menu, the list of choices vanishes, the background image stays, and there it hangs. It hangs until i hit: ctrl+alt+backspace. I have thought: to hell with it, and installed Debian/Lenny. Same problem (OH!).
I also installed the boot-loader to the second disk (/dev/sdb), hit F11 after the BIOS-screen and chosen the second hard-disk to boot from: a similar problem. It hangs, and the keyboard is "dead". I am clueless what to check for (i checked the general culprits, but with UUID its all a bit of a mess. I would say it looks good, but wouldn't bet on it) Anyone ever heard of something like that? Without error message its not easy to use the amazing Google. I do a bit of grub-troubleshooting, usually it works, but usually i get error-messages.
I made two threads about it, in case they contain useful info, here they are:
http://www.linuxquestions.org/questions ... sd-827059/
http://forums.freebsd.org/showthread.php?t=17021
I want to install ubuntu 9.10 DVD, I have the iso image, so i try to boot the installer from hard disk by adding this lines to my menu.lst.
Code:
title Install Ubuntu
kernel (hd0,0)/install-ubuntu/vmlinuz
[code]...
Acer Travelmate laptop, 1.3GHz Pentium M, 12MB Ram.pensuse 11.4 (upgraded from 11.3)Vanilla install, not running anything special, always startup and shutdown from scratch, never sleepFor several minutes after KDE appears and I open an app (any app, e.g. Chrome) the hard disk is going nuts. WTF is it doing and how do I stop it? Also some programs take years to start, e.g. digicam took TEN minutes the other day even after waiting a while after booting, the disk thrashing the whole time. But in 11.3 it started almost instantly.
View 9 Replies View RelatedHow to boot an iso image from hard disk. I have created a linux live cd with remastersys. I want to test it. So I want to boot it from my hard disk.
View 3 Replies View RelatedI am having 2 Hard Disk 1 is having RHEL 5 Installed And 2nd is having Windows XP, now i want to dual boot my PC with the help of this two Hard Disk? Can i Dual Boot with RHEL & Win XP having Installed in 2 different HD? what is the Procedure?
View 4 Replies View RelatedMy laptop had 1 hard disk, partitioned as follows:C: (NTFS), on which Windows XP was installed.D: (NTFS), on which I stored my personal data.Recently, I bought a new hard disk, and divided it into two partitions: An NTFS partition (to store personal data), and another partition on which I installed Linux (Debian Lenny).I want my systo act as follows:While booting the system: if I select to boot from the first hard disk, Windows XP loads. Else, if I select to boot from the second hard disk, Linux loads.In other words, I want the MBR of each disk to point at the corresponding OS.
View 7 Replies View Related