General :: No Hard Disk Drives When Installing Ubuntu
Dec 29, 2010
I'm not a stranger to Ubuntu Linux and I was using it for a couple of months with no problems until last week when I turned my computer on and it would go no further than the boot screen and it said 'Error- Insert System Disk'. So I inserted the system disk (Ubuntu Linux 10.something) and after waiting 10 minutes for it to load up it said 'Installation failed, desktop session will now be run and you can try installing again'. So I tried installing whilst on a desktop session and I eventually got to step 4 of 8 and it lets me go no further. This is what step 4 of 8 is:http://oi54.tinypic.com/mx2g79.jpg
And so I cant choose any disks or partitions and so it wont let me go any further. How do I create one? I'm currently running on desktop sessions and they take forever to load up and I cant watch videos or anything because there is no flash. By the way please try and explain to me really simply because I am quite dopey and I wont be able to understand posh complicated computer words.
View 9 Replies
ADVERTISEMENT
Apr 8, 2009
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies
View Related
Apr 15, 2010
I have one machine with two disks that I'd like to install Slackware on. I'd like to have the root folder and installed folders on hdb, and just have have hda as a disk I can use for storage (without any home directories, etc.). My problem is, I don't know how to make this boot, as I think LILO is installed on the primary drive, but the boot folder is located on hdb. I tried doing this before and was having problems booting, so I was just going to go through the whole process again, but don't really know the correct procedures.
View 2 Replies
View Related
Nov 28, 2010
My current partition is:
I have Fedora 14 installed. I'm trying to install CentOS 5.5 from the hard disk. I copied the seven part iso to the /iso. I didn't create a directory in the /iso. I ran the md5sum on the seven parts and compared it with the md5sum that is provided on the website and they are all identical.
When I tried to install from the hard problem, the first thing is instead of sda1,2,3,5 I found the following options:
well, I selected /dev/hda2 and left the directory blank. The images can't be found. What am I doing wrong? And why is the difference between sda in the partition and hda in the installation?
View 7 Replies
View Related
Sep 18, 2010
I want to install knoppix on my hard disk of my netbook, I did manage to boot knoppix from usb to a live session. But when I try to install it, it says my hard disk does not have a compatible partion table or something.
check this link:
[URL]
View 5 Replies
View Related
Nov 16, 2010
60 gigabyte SSDs are down around US$100.
It seems like the optimal use would be as a cache for the regular hard drives in my computer. Eliminating the need for a fast hard drive, so I can just use a slow 2TB (~US$100) drive with a SSD cache.
Is there a good way to do this yet?
It seems like it would be nice to be able to exclude some files from caching, for things like bittorrent.
Reviews of some SSDs: [URL]
View 9 Replies
View Related
Aug 16, 2010
I just bought a USB hard disk and when I plug it in it gets mounted as owner root and group root. I tried writing a udev rule for it based on the following guide:Nothing seems to work, it always mounts as root. Slackware 13.1, KDE, Dell Optiplex GX280, Western Digital Passport USB 320 gig drive.I am a member of the plugdev group, so it seems to me a rule should not even be necessary.
View 14 Replies
View Related
Dec 27, 2010
I have been trying to install Ubuntu on my new computer as a duel boot with Windows 7. My computer has four 1TB hard drives, One with Windows 7 installed, two that are used for storing media (both are independent, not in a RAID or anything like that) and one empty hard drive. This hard drive contains a 901.51 GB NTFS partition, and 30.00 GB of Unallocated space, I wish to install Ubuntu in this unallocated space; giving it 20 GB (the 10 GB left over might be used for installing XBMC Live). But when I boot Ubuntu's Live CD the installer doesn't show me the unallocated space, and doesn't really show me any of the extra Hard drives.
View 3 Replies
View Related
Jun 1, 2010
My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.
This is what I have:-
1st disc - no operating system much data
2nd Disc - empty except for Windows loader
3rd Disc - no operating system much stuff.
My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.
If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .
View 9 Replies
View Related
May 14, 2010
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies
View Related
Nov 13, 2009
I recently installed Fedora 11 x86_64 (dual boot with XP) and am having difficulty finding two of my three hard drives to mount them. This is my setup: 80 GB Hard drive (boot drive) with two partitions, one for XP (NTFS) and one for F11 (ext4). 2x250 GB Hard drives, one is formatted with NTFS, the other one has yet to be formatted (my plan is to use ext4).
All of my drives are SATA, on the same nVidia controller. After the install, I can see only the 80 GB hard drive (both partitions). What do I need to do to find the other two drives? During the install, it called the partitions /dev/sda0, sda1, sda2 and sda3, but I no longer see these drives. If I knew where the drives were I could mount them, but my systems just isn't seeing the drives.
This is the output of df:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_user-lv_root
[code]....
View 6 Replies
View Related
Jul 30, 2010
When you run a Linux live CD it automatically detects your hardware configuration, or at least tries to. Say you got a live CD and it works perfect on one computer, detects all the hardware. If you install the operating system from the live CD to a hard drive, does it only install the drivers you need for your hardware?
If so, say you were to hypothetically do that on a removable hard drive that you lock and unlock with the hardware keys; would that mean if you want to move the drive from one computer to another regularly, the OS would not be configured properly on a different hardware configuration, and wouldn't be able to configure itself properly because it is now on a hard drive? I know that Linux does try to detect new hardware each time it boots, but I guess the short version of the question is: Does installing a distribution on a live CD to a hard drive mean you will not have all the drivers available on the CD?
This is not something I am sure I will ever plan to do, but it would be no different than if you wanted to swap your drive into a new computer. If it could at least still connect to the Internet it might try to reconfigure itself. If installing the live CD means you get absolutely all the contents on the CD, that would answer my question. Maybe someone might know exactly how that would work.
View 14 Replies
View Related
May 26, 2011
The problem is every forum I read pretty much ends up with someone suggesting DD, everyone agreeing and the threads dead-end. This is not a good solution for real world large scale usage which is what I'm trying to do. At least it doesn't appear to be unless there is some switch I have misinterpreted when invoking the command. The problem I have with it is it's super bloated and god awful slow. It tries to write out the entire partition or set of partitions (based on the choice I have made) reguardless of if any of the space had been empty, and lets say the partition I copied from was 80 GB and I copy it to a 160 GB disk/partition... I am left with an 80 GB partition and 80 GB unused space and a need to use another tool such as Gparted to resize the newly imaged disk accordingly.
Right now what I use is Norton Ghost and it can do the job I need in only a couple minutes instead of a couple hours and it sizes the partition to max size all at once. I do not want to use this program tho... The fact is in order to make ghost run at a usable speed I have to use it's Windows and not its DOS version which leaves me using something like BartPE and... that's worse than using Windows ME. Surely someone out there has noticed this is a problem and developed a better program that can at least run on par with Ghost.
why I was hoping for a Linux solution it's because I would like to use a "one stop shop" disk, so to speak, where I can boot into a small linux distro such as Puppy and have a full suite at my disposal rather than booting with one disk, wiping, rebooting with another disk, ghosting then testing everything. I suppose if anyone knows of a distro that can already do all that including a good ghost alternative already packaged I would love that.
View 7 Replies
View Related
Jun 3, 2010
Months ago one of my computers died. I have bought a brand new one laptop, but I have a problem at the moment I wanted to install Ubuntu in dual boot with Windows 7: the new partition that windows 7 reserves for securing system files.
There are three partitions: Windows 7 principal, Windows 7 for securing system files (at the drive's beginning) and the recovery partition that HP puts there. Then I only have option to resize the Windows principal partition and get another principal partition. My question is if you know how to deal with this?
The other option you can help me is to advise me about some external hard drives to install ubuntu in them and don't touch the internal disk of my laptop.
View 6 Replies
View Related
Apr 6, 2010
If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
View 2 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Jul 9, 2010
I burned a Fedora ISO onto a CD and I love it. Now, I want to add it as a dual-boot to my hard disk. I divided Drive C into two (formatted) partitions one labeled Linux.During an attemped installation, I was able to find (thru "edit") the partition called "Linux." But one of the next questions threw me: it asked for a "mount point."I have no idea what that means (and yes I have readthe guide onthis site).
ACTUALLY... what I need to do is simply install into a partition I already set up.I don't find an option for that within the Fedora installation menu.I have 20 years of experience with Windows and try to keep up with everything, but Linux is totally new to me, so I don't understand the terminology.I also have been trying to find how to create a dual-boot situation from the hard disk, where XP is still my default (for now, at least).
View 12 Replies
View Related
Aug 9, 2011
I saved wubi.exe to c: and when running wubi, I pointed it to my usb hard drive for installation of ubuntu. When I rebooted my PC, I got a message that there was no boot manager. Even cntl-alt-delete did not work, so I unplugged the pwr cord and battery and reconnected them. I interrupted the boot to get to BIOS and found that Ubuntu was first in the boot chain. Apparently, when it is, no boot manager is found. So I removed the usb from the pc and was able to boot into W7.
View 5 Replies
View Related
Jun 30, 2010
mount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies
View Related
Apr 9, 2009
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies
View Related
Sep 23, 2010
I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies
View Related
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
Jun 21, 2011
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
View 6 Replies
View Related
Jan 21, 2010
I recently purchased 3 new WD cavier green 500gb drives with the intent of building a raid5 array and running linux. Admittedly I purchased without doing enough research and now I have serious doubts about running an os on raid5 with the onboard controller.So now I am thinking I should run one drive as an OS drive and mirror the other two. I don't have a fourth drive unless someone can convince my wife I need a fourth after already buying 3....
Is it possible to have multiple distributions where ALL distros save their docs to the raid dives? That way I can wipe/install the os and keep my files? I seem to recall that I can be done, just need someone to point the compass.
View 4 Replies
View Related
Mar 3, 2010
I have approx. 30x Western Digital SATA 2.5" hard drives ranging from 80GB to 500GB. These are ex-Tandberg RDX QuikStor backup drives that I no longer use and would like to use them as spare laptop hard drives.The only problem is upon installing the drive in a laptop it prompts for a hard drive user password.
Are there any open source methods to wipe the password (and data; I don't care about that)? I've tried using various wiping methods (dd, dban etc.) but the password still remains.Any help is greatly appreciated; I really need these drives.Plugging it in via a USB HDD enclosure shows as /dev/sdb but does not respond to (c)fdisk or show any partitions (/dev/sdb1 etc).
View 14 Replies
View Related
Feb 6, 2011
When the computer starts, you will read a flashing message about S.M.A.R.T and a few other things.I have two hard drives. There is a strange noise from the computer when I run it for more than 3 or 4 hours continuously. I firmly believe one of the hard drives is not working properly. I saw a message about a problem in S.M.A.R.T.It was a flashing message. I couldn't read it. I don't run any Windows on the computer. All are Linux. The default is Mandriva.
How do I read the flashing message you see at the start of a computer? I want to find out the damage one replace it with a new one.
View 9 Replies
View Related
Jan 3, 2010
I was thinking about this for a while and I haven't come across it in any of my reading. Could you split an os over two drives? Example:
drive hda, 35GB xp - 5GB fat32storage / hda1 8GB root - 2GB swap
drive hdb 10GB usr - 10GB home -10GB var / hdb 10GB root linux#2
hdb 1GB swap - 9GB user - 5GB home - 5GB tmp I hope I made this clear enough I'm sure someone must have tried this before. Maybe I got too much time on my hands.
View 3 Replies
View Related
Mar 20, 2011
I tried installing Red Hat linux on my Sata hard disk . As soon as the hardware detection phase starts it generates the error "No hardware detected".roblem? (I have also tested RHLE 5, CentOS 5.4, but none of them detect the hard disk and I can not install anyone).I have installed Windows 7 on one of my disks and I have not any problem with it.I also changed storage configuration in Bios as AHCI, IDE,
My Hardware config is as below:
Mainboard: ASUS P6X58D premium,
CPU: core i7 950,
HDD: two 1 TB WD SATA3
Ram: 6 GB (3*2 GB cruciall[/U][/U][/B]
View 4 Replies
View Related
Jan 12, 2011
I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed.
View 3 Replies
View Related
