Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:
After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:
Code:
It's all on one hard drive which doesn't show any errors:
Code:
Partition table entries are not in disk order
Code:
Some partitions don't show a file system because they are luks-encrypted.
As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.
As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.
Finally, an extract from my /boot/grub/menu.lst:
Code: ...
The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.
I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.
I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.
Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?
I have installed on my computer Fedora 10, now I want to install opensuse and create a dual boot environment and I want to have them both on the same hard disk. how to carry on with this task?
View 7 Replies View RelatedI'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
i started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
View 6 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI am a novice in Linux but due to my academic requirement I had to install Linux (Fedora 8). I have 2 hard disk's (80GB & 20GB), on the first HD which is 80GB I have Windows XP and the other one I partitioned and installed Linux. Now the first problem is that, whenever I start my PC I get a error which says "GRUB hard disk error", however when I restart the machine it's fine and gives me the boot options.
Secondly, the HD containing windows was affected by virus so I had to format & reinstall XP. Strangely after that I am not getting any boot options and it's like windows is the only 1 OS running. But on windows the partition on which Linux is installed in intact. So I assume something is deleted maybe the Linux boot file.
I'm a n00b at dual booting and I plan on installing Ubuntu 10.04 on a separate hard drive than my Windows 7 64 bit one in a dual boot situation. I have read that you can do this by unplugging the Windows hard drive, install Ubuntu on the other one, and than plug the Windows hard drive back in and everything will be fine and dandy. Is this correct? If it is, will I have to manually set the Primary and Secondary drive (in the BIOS I think?), or will it automatically do that.
View 6 Replies View RelatedI would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies View RelatedI've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.
To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.
However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
I am having 2 Hard Disk 1 is having RHEL 5 Installed And 2nd is having Windows XP, now i want to dual boot my PC with the help of this two Hard Disk? Can i Dual Boot with RHEL & Win XP having Installed in 2 different HD? what is the Procedure?
View 4 Replies View RelatedI would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?
View 1 Replies View RelatedHow to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
View 2 Replies View RelatedI just bought a new Windows 7 machine and want to install Ubuntu 10.10 for a dual boot environment.There's a lot of info describing how to do this, but it all describes re-partioning the Windows drive, burning Ubuntu on a CD, inserting that CD, etc. I had a dual-boot Windows and Ubuntu machine that just died on me. Windows was on one hard drive and Ubuntu - along with my entire software development environment - was on the other. As far as I know both drives are fine.
When my new (Windows) machine gets here I want to open it up and stick in the Ubuntu hard drive from my old machine... but then I'm not sure what to do. I'd really like to be able to boot to that hard drive (or the Windows one), just like I did before. It seems that this should be simpler than installing a fresh Ubuntu from a special CD, after all, everything is already expanded and working on the hard drive. Can someone give me some pointers that will help me solve this problem?
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
I installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as
Fedora(2.6.27.9-159.fc10.i686)
Fedora(2.6.27.5-117.fc10.i686)
Other
The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I've successfully used Fedora 11 from a USB stick as a live cd iso. Everything seems to work on my netbook so i want to try installing it but I need it to be a dual boot with windows. How can i do this? And will it definitely work or are there issues (I've read that F11 has problems installing if not taking over the entire HD)?
View 3 Replies View RelatedI just installed Fedora and I love it but I can no longer boot Windows 7. I have two hard drives, sda and sdb.sda1 is my windows partition. sda2 is my /boot for Fedora. sdb1 is an ntfs partition for storage. sdb2 is swap. sdb3 is my 40 gig /root partition. Why can't I boot windows?
View 10 Replies View RelatedA while ago I used a friends computer with F11 installed on it. I definitely want to install F13 on my computer now. Please, can someone either tell me complete information from the beggining to the end, or simply direct me to a guide somewhere else on the internet. I have a F13 live cd and want Windows 7 to be in control of the boot (by I suppose LiveBCD).
View 14 Replies View RelatedIn fact, I put it on my PC of RedHat when it was free, and it didn't work.Are there any such tutorials to dual boot Windows 7 with Fedora 15 (latest version), or would someone be kind enough to walk me through the process? I have tons of music on Windows that I don't want to get lost.What are the chances that my Windows hardware will recognize in Fedora? I was bypassing to get to this forum, and I saw Nvidia drivers are difficult to get configured. Those are the drivers my PC runs on. I'm not sure of my hardware. How difficult would it to setup, and configure hardware?
View 2 Replies View RelatedI am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
I have a Centos 5.5 system that had 2 primary partitions (2nd is setup as LVM with multiple LVM partitions) and then installed Windows 7 as Dual Boot.
However, Windows 7 has installed a 200MB system partition which is GPT/EFI as partition 3 and the Win7 OS as a Primary Partition.
I have a heap of space undefined after this fourth primary partition.
However, as 4 primary partitions have been used, I can no longer create an extended partition to utilise this.
As such I would like to know what is the best and safest way to proceed, and if possible step by steps instructions for the best option eg:
1. Delete the Windows 7 System Partition and create the extended partition (I expect this will prevent Windows from booting)
2. Use something like partition magic to change the Win 7 OS Partition 4 to an extended partition (Not sure if this will work)
3. Make changes to the overall system including both Linux and Windows so that it will use GPT only (I have
had no experience with GPT so this is a bit scary)
4. Other?
I'm wondering if anyone can give me some tips about this.I have very little fedora experiee and wanna start playing with it now.I'v bin using it for some short time a long ago but nothing much.Now I could use some help with this:Can I and how, instal Fedora11, while having Windows7 instaleed allready and then have them both with dual boot. I guess it should be possible but some tips / guide would be great so I don't kill my windows and have to reinstal all over again, as i wanna keep windows as main OS for work but have fedora to learn as well.By the way, I have 2x640Gb in raid0, 1st partition 100gb with Windows7 on it, and the rest on another partition. Both have data on them. If that means anything for instalation
View 9 Replies View RelatedI have Windows Vista Home Premium and I don't want to switch entirely to Fedora because I'm not as familiar with it as I am Windows. I mainly wanted to install Fedora for my Linux class at the Community College I attend. How do I install it with a dual boot so it doesn't take over Windows Vista? I had that happen once and it was a mess to fix and reinstall Windows Vista too.
View 7 Replies View RelatedI am attending college and I am starting my first Linux class tomorrow. I am going to be learning Fedora 8 (why they don't upgrade, is beyond me) anyways, I also have a third Server 2003 class. We have our own hard drives that we put in the school computers. (80gb) But here is the problem, I know normally your suppose to install Windows first and then Fedora second and you do not have a dual boot problem.
However my Server 2003 class was suppose to be on Monday (which was labor day) so I didn't have school. I am going to be installing Fedora tomorrow first thing, then on this next Monday I will be installing Server 2003 on the same hard drive, but Windows will be going on second. So my question is, how would I fix the bootloader so I can still dual boot Fedora and Windows without having to reinstall Fedora again?
I just installed Windows 7 Ultimate on my computer and I want to install Fedora Core 11 and dual boot my system. I have been on the net looking around, but I can't seem to find any suggestions on how I would do this. Can someone help me or give me a URL(s) that will give me a step-by-step guide on how to install Fedora Core 11 on a Windows 7 computer?
View 4 Replies View Related