Ubuntu Installation :: Cannot Boot From Hard Disk
Sep 26, 2010
This afternoon I finally had the time to run this Ubuntu KK CD and load over my old xp/Jaunty J partition. I had previously run the distro. through the CD, without harming my old partition. On doing so the system consistently reported my Toshiba ATA 120 gig hard disk had multiple bad sectors and was failing. As a true end user (who mucks only when necessary with the CLI) I just figured writing over the partition would end the failure. To be sure I ran Memtest8.66 v2.11 from the LiveCD; everything checked out fine. So I installed KK.
Or was I? Why did it still have the "Install ubuntu 9.10 ISO" icon on the left hand side of the screen? How did the CD come to whir when I tried starting apps like Open Office? Something wasn't right. So I rebooted, this time from the HDD. The start up looked predictable - there's that PXE-E361 Media Test Failure on some cable, I've been staring at that since I built the dual partition. But what's this? PXE-MOF: exiting EXE ROM. Huh? Oh and then the letter j..
This is a Toshiba Satellite A105 with a 200 gH 1gig Pentium M. When I boot the liveCD I get this trial environment that works fine. When I try installing from it I can even see that I'm writing over the previous, whole 9.10 partition I created this afternoon. Regardless when I boot from HDD I get that weird letter j..
I've checked on line for boot issues, and the forum too, but so far haven't seen an issue booting from the HDD, especially when the distro. is already loaded. What am I missing here, and how do I install it from a live CD environment?
View 9 Replies
ADVERTISEMENT
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Sep 23, 2010
I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies
View Related
Mar 30, 2010
I want to install ubuntu 9.10 DVD, I have the iso image, so i try to boot the installer from hard disk by adding this lines to my menu.lst.
Code:
title Install Ubuntu
kernel (hd0,0)/install-ubuntu/vmlinuz
[code]...
View 9 Replies
View Related
Aug 9, 2011
I saved wubi.exe to c: and when running wubi, I pointed it to my usb hard drive for installation of ubuntu. When I rebooted my PC, I got a message that there was no boot manager. Even cntl-alt-delete did not work, so I unplugged the pwr cord and battery and reconnected them. I interrupted the boot to get to BIOS and found that Ubuntu was first in the boot chain. Apparently, when it is, no boot manager is found. So I removed the usb from the pc and was able to boot into W7.
View 5 Replies
View Related
Oct 31, 2010
I have installed Kubuntu on external WD HDD , it does NOT boot on this laptop but works on couple of other laptops , attached is the results txt output of the boot_info...sh.I can boot with USB flash drive that has kubuntu live Cd image when I use the external HDD ,it gives a blinking cursor only
View 9 Replies
View Related
Feb 15, 2011
after my upgrades i noticed one hard drive was acting funny i was gonna reformat the drive anyway to totally remove winblows from my system grub was installed on the boot sector of the drive that failed how can i get the next drive in line to boot if some one can get me to a howto or tell me what i need to do short there of reinstalling the operating system.
View 5 Replies
View Related
May 9, 2011
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
View 9 Replies
View Related
May 25, 2011
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
View 14 Replies
View Related
Mar 19, 2010
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
View 5 Replies
View Related
Jun 7, 2011
i started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
View 6 Replies
View Related
May 8, 2011
I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.
However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.
Here are my directory structures:
debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.
menuentry "Debian 6.01 Live (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root=(hd0,msdos1)
[code]....
Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.
View 8 Replies
View Related
Mar 9, 2011
I have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?
View 7 Replies
View Related
Apr 8, 2009
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies
View Related
Jun 15, 2011
I have an Acer aspire 1551 notebook Ubuntu worked fine until now. It will not boot. It boots until the music sounds, and the login screen is supposed to appear, then it just locks up. The strange part is that both the installed version and the USB ubuntu live version fail at the same point. I even tried two versions of Ubuntu live on USB. Windows 7 however works fine. I think something must have happened to the hardware That will not load ubuntu,but will load windows About the only thing I did different on my last session was to install wine and then install Textpad in wine.
View 2 Replies
View Related
May 14, 2010
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies
View Related
Jun 21, 2011
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
View 6 Replies
View Related
Aug 21, 2010
I installed an OS on the second hard-disk/partition3 (/dev/sdb3; OS was FreeBSD). Added the entry and when i boot: nothing. I choose the OS from grub's menu, the list of choices vanishes, the background image stays, and there it hangs. It hangs until i hit: ctrl+alt+backspace. I have thought: to hell with it, and installed Debian/Lenny. Same problem (OH!).
I also installed the boot-loader to the second disk (/dev/sdb), hit F11 after the BIOS-screen and chosen the second hard-disk to boot from: a similar problem. It hangs, and the keyboard is "dead". I am clueless what to check for (i checked the general culprits, but with UUID its all a bit of a mess. I would say it looks good, but wouldn't bet on it) Anyone ever heard of something like that? Without error message its not easy to use the amazing Google. I do a bit of grub-troubleshooting, usually it works, but usually i get error-messages.
I made two threads about it, in case they contain useful info, here they are:
http://www.linuxquestions.org/questions ... sd-827059/
http://forums.freebsd.org/showthread.php?t=17021
View 14 Replies
View Related
May 29, 2011
I'd like to move my existing Ubuntu installation from my hard disk (/dev/sda1) to a USB stick. How do I copy the data from HD to USB? dd is obviously not the right option since the HD is 320GB and the USB stick only 16GB. However, only 3.5GB are used so this makes perfect sense.And it would make my HTPC even more silent |-)
View 1 Replies
View Related
Apr 24, 2011
Acer Travelmate laptop, 1.3GHz Pentium M, 12MB Ram.pensuse 11.4 (upgraded from 11.3)Vanilla install, not running anything special, always startup and shutdown from scratch, never sleepFor several minutes after KDE appears and I open an app (any app, e.g. Chrome) the hard disk is going nuts. WTF is it doing and how do I stop it? Also some programs take years to start, e.g. digicam took TEN minutes the other day even after waiting a while after booting, the disk thrashing the whole time. But in 11.3 it started almost instantly.
View 9 Replies
View Related
May 17, 2010
How to boot an iso image from hard disk. I have created a linux live cd with remastersys. I want to test it. So I want to boot it from my hard disk.
View 3 Replies
View Related
Aug 17, 2010
I am having 2 Hard Disk 1 is having RHEL 5 Installed And 2nd is having Windows XP, now i want to dual boot my PC with the help of this two Hard Disk? Can i Dual Boot with RHEL & Win XP having Installed in 2 different HD? what is the Procedure?
View 4 Replies
View Related
Jul 28, 2010
My laptop had 1 hard disk, partitioned as follows:C: (NTFS), on which Windows XP was installed.D: (NTFS), on which I stored my personal data.Recently, I bought a new hard disk, and divided it into two partitions: An NTFS partition (to store personal data), and another partition on which I installed Linux (Debian Lenny).I want my systo act as follows:While booting the system: if I select to boot from the first hard disk, Windows XP loads. Else, if I select to boot from the second hard disk, Linux loads.In other words, I want the MBR of each disk to point at the corresponding OS.
View 7 Replies
View Related
Oct 22, 2010
I've recently updated my ubuntu lucid to maverick (32bit).However I noticed a strange issue at boot. My boot time is increased more than three times(tried to reprofile, but with no improvement) from 24s to 1.23min.After some bootcharting,I noticed that the disk utilization during maverick boot seems to be at 50% for most of the time and also the cpu seems to work at half speed for most of the time...My laptop is an asus m51sn, intel t8300, nvidia geforce 9500m gs, 3gb ram, 500Gb WD scorpio blue hdd.
bootchart for maverick:
bootchart for lucid:
View 2 Replies
View Related
Nov 1, 2009
I have installed on my computer Fedora 10, now I want to install opensuse and create a dual boot environment and I want to have them both on the same hard disk. how to carry on with this task?
View 7 Replies
View Related
Mar 28, 2010
I wanted to implement raid5 such that one partition is from my laptop's hard disk and others from other hard disks. After making one partition a raid partition, I rebooted the system. The computer stopped mid-way during booting, and brought me to the shell. On typing fsck -p, it told me an unexpected error occured in the partition which I had made for raid. Is there some condition that we cannot boot from a disk containing one of the raid partitions ?
View 1 Replies
View Related
Nov 8, 2010
I have ran into a bit of a problem. my server(10.10) is hosting a website with no problems whatsoever. I decided to install an extra hard drive, and format. i did both, and turned off my server after some more configuration. After a while, I decided that the new hard drive was a little loud for my liking, so I removed it. I had not put any files on it. I rebooted and saw a message that said this:Quote:fsck from util-linux-ng 2.17.2/dev/sda1: clean, 101202/2351104 files, 1516082/9393920 blocksI think that when I turned it off, it was formatting. How do I stop this from halting the boot? I can get by it by pressing the b or a key.
View 2 Replies
View Related
Oct 1, 2010
I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:
After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:
Code:
It's all on one hard drive which doesn't show any errors:
Code:
Partition table entries are not in disk order
Code:
Some partitions don't show a file system because they are luks-encrypted.
As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.
As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.
Finally, an extract from my /boot/grub/menu.lst:
Code: ...
The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.
I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.
I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.
Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?
View 9 Replies
View Related
Feb 20, 2011
Caused by Used fdisk to delete the windows partition, in my dual boot. Then I could no longer log in to ubuntu, the partition table was some how courpt and I couldnt remount I then decided to use the windows partitioner from windows setup, as I thought it is so stupid, to reformat the partition where I had ubuntu. I wanted reinstall ubuntu, and I know that during the setup I could straighten out the mess I'd made.
Windows has now installed two 8mb one cylinder partitions on my HD. When I start the PC I get a !disk error occurred Press Crlt Alt Del to restart! This happens everytime. HD boot sequence is buggered, i guess.
I can boot from other devices. USB + CD. How when I use the windows disk to boot up I can see the 2 8mb partition, which it wont let me delete. How can I delete this via linux?
Also when I try to install ubuntu from the usb drive, it stalls just after the Preparing to install part. The next screen is when you set the partition table, swap drive etc. When I quit I get the following error !Process Glib WARNING getpuuid_r() failed due to unknown id!
The usb_liveCD does however mount my hard disk partitions and luckily I have managed to back everything up to an external.
results from df
/var/log# df
Filesystem 1K-blocks Used Available Use% Mounted on
aufs 766804 68140 698664 9% /
none 760892 244 760648 1% /dev
/dev/sdb1 3911856 712128 3199728 19% /cdrom
[Code].....
View 4 Replies
View Related
Apr 6, 2010
If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
View 2 Replies
View Related
