Ubuntu Installation :: Keyboard And Mouse Failure When Trying To Run Live Disk
Oct 9, 2010
Keyboard and mouse failure when trying to run a live Ubuntu disk on an Acer Aspire M1641 desktop. I was trying to show off the Ubuntu system to a colleague when to my surprise as it booted up both keyboard and mouse died. There was no response at all, the only option was to use the power button, rebooting into Vista all back to normal. I tried several other versions of Ubuntu going back 8.04 even Knoppix failed to get the keyboard and mouse working. Even after re installing the windows drivers and several more attempts even changing keyboard and mouse, I could not get any linux live disk to work.
View 6 Replies
ADVERTISEMENT
May 10, 2011
I'm trying to net install Wheezy on an Abit IC7-G PIV system. I tried this months ago but the problem still exists. This is not so much an installation problem but after installation when it boots, I lose PS/2 mouse, PS/2 keyboard and network. I get:
startpar. service(s) returned failure udev ... failed I can plug USB mouse and keyboard in after this failure which then works. There is nothing wrong with the hardware. It works fine on other systems. Squeeze works perfectly.
View 7 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Sep 12, 2009
I am running Vista on my C: drive and I just got Fedora 11. I planned to dual boot Vista and fedora 11. I Downloaded the Live CD from the site (680 +- MB) and burned the files IN the .iso file to an empty DVD and CD. Shrank my D: drive and now have about 27 GiB wort of unpartitioned space. I booted from the Live CD. everything went OK until i chose Boot from the Boot Menu that came up. First it took me to a screen with the following message:
ACPI: expecting a [reference] package element found type 5. and then in went on to boot normally. Then when it reached the user login screen, I found that my mouse and keyboard were'nt responding and that there was no lights on any of the keys. I checked the USB cables and did a hard shutdown and booted from the Live CD again, but the problem persists.
View 5 Replies
View Related
Feb 17, 2011
When booting to the live cd, I have keyboard function enough to choose the proper entry to load os. The os starts loading and I can use keyboard to choose language, keyboard etc. About the time it gets to what time zone I'm in, it freezes. No mouse and no keyboard. I have tried this with both Ubuntu 10.04 and Mint 10. My hdd with Windows XP works fine. There are a lot of complaints and requests for help on the 'Net about this but no answers. I have Mint 10 on my main computer and have used Ubuntu for a year or so, meaning I have been able to load and use them with no problems. I have scoured my BIOS for any changes needed and can't find any. Neither USB nor PS2 keyboards or mice work. I have seen some posts about editing xorg.conf or the grub but how can I do that when I have no control after a second or two.
View 1 Replies
View Related
Jun 8, 2010
I have Desk top Compaq Presario Core2 Duo, 2 GB RAM I tried 10.04 Live CD. After booting as I try Firefox, the keyboard & mouse become inactive. I have to shut down the PC to come out
View 1 Replies
View Related
Jan 1, 2011
how I restore dead mouse and keyboard input from the live cd. Basically what happened was I was updating the machine and decided to let them run in the background while my sister's 6 year old son played some tux computer games, when he was finished he switched the entire computer off at the power button and it was still updating in the background. Now there is no mouse or keyboard input, I cannot get into the recovery console, nor can I control a terminal from the login screen in order to successfully complete the update. This means basically the only option to fix it would be to re-install or fix the human user interface device drivers (keyboard and mouse) via the live cd, I am in need of some advice or instructions on how to go about fixing this issue.
View 5 Replies
View Related
Mar 6, 2010
I recently switched to 64-bit Karmic after installing extra memory. I have everything working fine, but I am experiencing an annoying lag in keyboard and mouse response whenever any of the CPU cores briefly jumps to 100% usage, which tends to happen every 10 to 15 seconds, usually caused by firefox.
I'll be typing or scrolling, and there is fairly regularly a hesitation of a second or two in which nothing happens on-screen, and then everything catches up again, ie the keyboard buffer empties to screen or the page scrolls a lot.
I've tried changing the Nvidia driver and the disk iosched elevator, which were the only ideas I could find when searching on this issue.
It seems to me that (a) the CPU usage shouldn't be jumping up like that, and (b) even if it does, it shouldn't affect keyboard an mouse activity to such an extent. This only started happening after switching from 32-bit to 64-bit Karmic.
SYSTEM SPECS
Intel Q6600 2.4GHz quad-core CPU
Gigabyte EP45-UD3L motherboard (P45 chipset)
6 GB memory
Disk space: 2x 250GB drives + 1500GB RAID5
Ubuntu 9.10 64-bit
Linux 2.5.31-20 kernel
View 7 Replies
View Related
Mar 1, 2011
I've just tried to install Squeeze on my guest partition, using a magazine disk that offered a live CD version with installer, which I ran in text-based expert mode. The process was not a success.
1. The routine for installing grub claimed (hd0,2) was the same as /dev/hda2
2. Starting Debian's grub from the Fedora bootloader with chainloader failed
3. A conventional start revealed all sorts of problems, ending with "/bin/sh can't access tty"
I can't believe Debian could produce something like that! Has anyone here used their live CD as an installer? Tell me this mess is down to Linux Format magazine!
View 4 Replies
View Related
Apr 17, 2010
Tried to install 10.4 Beta2 on my testing machine. Boots but then splash screen starts scrolling really fast though I can notice that 5 dots are moving so no hanging. It takes quite a while and then black screen appears (also scrolling) and I cannot read what's there; last line looks like a prompt. Alt-Ctrl-Del reboots the machine. So I cannot even enter Live mode.
This machine is about 7-8 y.o. P4 2.4GHz (i686) on Asus P4S333/c, 2.5GB ram, GeForce3-Ti200, latest bios 2003 but runs any Linux (I tried) and FreeBSD 9-CURRENT perfectly (Even win7 is installable...but runs badly). On newer machine same CD works fine. The machine is AthlonX2 2.3GHz on Asus M3N78-vm, 4GB ram, onboard chip GeForce8200, HDDs, DVD-RW - all SATA (AHCI). What could be wrong with my old machine? Does Ubuntu still support 96xx Nvidia driver?
View 3 Replies
View Related
Aug 3, 2010
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
View 6 Replies
View Related
Mar 18, 2010
Ubuntu/Linux operating systems. It installs just fine but after it reboots I get a "disk boot failure, insert system disk". I have searched around but I can't seem to find anything that works. There is only one hard drive in my computer and no other operating systems on it.
View 1 Replies
View Related
Aug 21, 2011
Here are my specs to start off...
OS: Corrupted Windows XP, Home Edition
CPU: Pentium 4 2.8GHz
RAM: 1gb
Graphic Card: nVidia GeForce 8600 GS
So I corrupted my Windows OS by doing something stupid so I decided to install Unbuntu. I tried installing it over my windows OS, but as it's scanning the disk it fails and says "Apt configuration failure" and then "installation failure". I can't upload my partitions because I can't run my OS to find them.
I know the information is limited I've considered trying to install a different linux OS or even format my entire harddrive (I would really prefer NOT to do that since I'd have to install all the drivers off the internet).
View 5 Replies
View Related
Aug 22, 2010
Just got back to attempting to play with 10.04 using its Live CD. It consistently goes to the "Log In" page and not the Live CD page on running. I saw a Post specifying a F key to be pressed on boot-up to get to the desired starting point some time ago, but did not write it down. Some advice did say press Any Key but this does not seem to do the job. Tried to use the search function here but no joy. Can anyone remember which F key? Note that as a check, I tried to use 9.10 Live CD and this worked fine, so it is not a machine problem.
View 2 Replies
View Related
May 10, 2010
I just upgraded from 9.10 to 10,4 via update manager and now when I switch on, the boot process seems to work but when I arrived to the login page, I can't use mouse or keyboard. The system is not freezed because I can see the watch on the lower right running properly.
View 3 Replies
View Related
Apr 20, 2011
After a 4 to 5 minutes after a succesful instalation of Ubuntu 10.10 the mouse and keyboard freeze. I increased the memory and installed a 500 gb hard drive and still have the problem. a second problem. How do I find this post after a day or so.
View 9 Replies
View Related
May 7, 2011
I recently updated from 8.10 to 10.4 by updating to 9.04 & 9.10 first. My problem is, everything seems to be booting normally but once the splash screen loads, it freezes and the keyboard and mouse both stop working. After the splash screen hangs for several minutes, the screen goes black. I am wondering if there is something I can do during the boot sequence to affect the process or if I could do something with a burnt copy of 10.4.
View 2 Replies
View Related
Oct 16, 2010
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized.
I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
View 2 Replies
View Related
Jan 11, 2010
System was running fine under 8.04 but decided to update. The live CD works fine but after install, the Mouse and Keyboard stop working under 9.10. Even the keyboard power button is off. Disconnecting and reconnecting the keyboard or the mouse does not . AMD Athlon 64 X2 3800+ PS/2 Keyboard and PS/2 mouse
Everything else seems OK but how would I know without the keyboard or mouse. The keyboard turns off right before the first Ubuntu screen. The Numlock will go off and then nothing. Tried to run dpkg - fix broken packages after booting to repair. All I get is fail to fetch http: (whatever )Could not resolve us.archive.ubuntu.com. Update: Alt-F3 ... then Booting to terminal mode does not disable the keyboard.
View 9 Replies
View Related
Mar 9, 2010
I tried running Ubuntu Linux 9.10 on my computer directly from the CD, without installing, and when it had finished loading neither the keyboard nor the mouse would work. I got a message saying that restricted drivers had been blocked. I can't press what I think to be the unblock command because both the keyboard and mouse had been blocked.
View 2 Replies
View Related
Apr 30, 2010
I tried to do a clean install of Ubuntu 10.04, but when I get to the screen if I want to test or install Ubuntu, the keyboard and mouse (bluetooth) don't work. I tried to resync the peripherals, I disconnected usb connector base of the tower and putting it back but nothing works for me. I have a Logitech Desktop MX 5000 (Bluetooth).
View 9 Replies
View Related
May 14, 2010
I recently upgraded my Dell Vostro V13 from 9.04 to 10.04. All seemed to go well, but now the keyboard (and touchpad) aren't being recognized on bootup. I can get to single user mode OK --- keyboard is fine, but something is badly amiss as I can't use the mouse or keyboard when the X-server starts.
View 1 Replies
View Related
Nov 5, 2010
I upgraded to 10.10 from 10.04 few weeks ago. Everything was working fine until today when I did a partial upgrade and it removed some of the lib files. Now my usb mouse and keyboard is not working. I can move the mouse around but can't click ( left or right ). I have nvidia graphics card. I tried running it under safe graphics mode and when I do that everything works fine except for the compiz obviously. I have tried reinstalling nvidia driver to see if that would make a difference but that didn't work either. I am not sure which lib files did ubuntu removed. I have searched everywhere to find a solution on the web and the only thing I think it might b iz my xconf file iz messed up. I really don't want to reinstall the whole OS and loose all my apps.
View 1 Replies
View Related
Dec 25, 2010
I tried to upgrade from 10.4 to 10.10.Every thing went normal until the grub screen wanted me to select which kernel.The wireless usb keyboard and mouse would not work.I found an old keyboard and mouse, they worked.the login screen popped up, I selected the user name and typed the password.After a moment the login screen pops back up.I can log into the recovery console.
View 2 Replies
View Related
Jan 24, 2011
I am using 10.10, yesterday I did an upgrade using update manager. After restart, booting stops at login screen, keyboard and mouse is not working. I tried login into recovery mode as well as previous kernel versions nothing is working. I tried to login into single user mode even that is also not working.
View 2 Replies
View Related
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
View Related
Feb 15, 2011
after my upgrades i noticed one hard drive was acting funny i was gonna reformat the drive anyway to totally remove winblows from my system grub was installed on the boot sector of the drive that failed how can i get the next drive in line to boot if some one can get me to a howto or tell me what i need to do short there of reinstalling the operating system.
View 5 Replies
View Related
Jun 11, 2009
I'm having an issue installing Fedora 11. The install goes fine, but after restarting (when I get to the initial configuration screen) my keyboard and mouse don't work. I can boot into the Live CD without issue. My boot.log file is below:
boot.log:
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [OK]
Setting hostname Ste-PC: [OK]
mdadm: failed to add /dev/sda1 to /dev/md/imsm0: No such device or address
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: Started /dev/md126 with 2 devices .....
HAL is failing to start, could that be the issue? If so, how should I go about fixing it?
View 14 Replies
View Related
Apr 30, 2010
Multi GPU - Mouse and Keyboard Freeze once enabled Previously on Ubuntu Karmic I had multi GPU setup without a problem.System consists of three ATI radeon HD 3600 series (multi head) running 6 monitors.
Setting it up was was easy as on Microsoft windows. All I did was download the ati catalyst and issue the following command: aticonfig --initial=dual-head --adapter=all
That created the perfect xorg.conf. With the amdcccle desktop, I then rearranged the monitors around to my setup and enabled xinerama. I thus had a total of six monitors working without a problem. (Naturally with compiz turned off).
- UPGRADING TO LUCID BIGGEST MISTAKE -
Yesterday the update manager popped up Lucid Ubuntu 10.04 Release available. I upgraded. I got the same issue of fglrx.. Reading through Forum I deleted the /usr/share/ati folder. uninstalled the catalyst. Rebooted in safe mode and then re-installed via synatic fglrx and amdcccle. All went well.
I then issued the basic command.
aticonfig --initial -f
This created the standard xorg.conf. On rebooting machine. My first two screens (off the first Radeon HD 3600) worked fine, without a problem. (See attached file)
I then issued
aticonfig --initial=dual-head --adapter=all.
This created the long xorg.conf file for all the cards on the system to work.
BUMPER !! Machine reboots and right before the X login screen appears all of a sudden my monitor screen goes into "Digital Power saving mode" and the monitor goes to sleep. Keyboard and Mouse are not responsive (All freeze). No alternative but to cold boot the machine and restart.
I have tried everything, each time mouse and keyboard just freeze.
View 5 Replies
View Related
May 28, 2010
I upgraded from 9.10 to 10.04 LTS last week (32 bit, gnome desktop, no desktop effects). The system was quite stable before the upgrade (it's usually on 24/7 with uptimes in the dozens of days), but ever since updating to 10.04, the system loses all mouse and keyboard input at random times.
I can still ssh into the system fine and reboot it in an orderly fashion from a laptop, but I'd rather that it wouldn't freeze like this in the first place
I've tried service gdm start / stop from an ssh session to see if it's an xorg-related problem, but sadly that did not help in recovering mouse / keyboard input.
I also tried unplugging and re-plugging the ps/2 keyboard and the usb mouse, but sadly that also didn't help.
I don't see any weird messages in dmesg, so it's not a kernel oops either it seems.
I'm using the proprietary nvidia driver if that matters.
View 6 Replies
View Related
