Ubuntu Installation :: Failure During Disk Scan?
Aug 21, 2011
Here are my specs to start off...
OS: Corrupted Windows XP, Home Edition
CPU: Pentium 4 2.8GHz
RAM: 1gb
Graphic Card: nVidia GeForce 8600 GS
So I corrupted my Windows OS by doing something stupid so I decided to install Unbuntu. I tried installing it over my windows OS, but as it's scanning the disk it fails and says "Apt configuration failure" and then "installation failure". I can't upload my partitions because I can't run my OS to find them.
I know the information is limited I've considered trying to install a different linux OS or even format my entire harddrive (I would really prefer NOT to do that since I'd have to install all the drivers off the internet).
View 5 Replies
ADVERTISEMENT
Mar 18, 2010
Ubuntu/Linux operating systems. It installs just fine but after it reboots I get a "disk boot failure, insert system disk". I have searched around but I can't seem to find anything that works. There is only one hard drive in my computer and no other operating systems on it.
View 1 Replies
View Related
May 1, 2011
I just installed OpenSUSE 11.4 x64 as a fresh full-install last week. Seems to be running great, up until the last couple days when I installed AVG. Every time I do a avgscan, it runs for 20 to 60 min, and then causes the PC to reboot. The only thing I can find is the following event in the /var/log/messages:
Code:
May 1 11:45:01 linuxbox sntp[7653]: Started sntp
May 1 11:45:59 linuxbox kernel: [38429.349995] iTCO_wdt: Unexpected close, not stopping watchdog!
May 1 11:46:00 linuxbox kernel: [38430.111688] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[Code].....
I get this result every time I try to do a virus scan. I also have seen this result once when doing a large scp transfer from another Suse box. The AVG log just terminates and gives no warnings as to what's going wrong.
Are there any other logs I can check out to try to troubleshoot this further???
View 9 Replies
View Related
Oct 9, 2010
Keyboard and mouse failure when trying to run a live Ubuntu disk on an Acer Aspire M1641 desktop. I was trying to show off the Ubuntu system to a colleague when to my surprise as it booted up both keyboard and mouse died. There was no response at all, the only option was to use the power button, rebooting into Vista all back to normal. I tried several other versions of Ubuntu going back 8.04 even Knoppix failed to get the keyboard and mouse working. Even after re installing the windows drivers and several more attempts even changing keyboard and mouse, I could not get any linux live disk to work.
View 6 Replies
View Related
Oct 16, 2010
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized.
I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
View 2 Replies
View Related
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
View Related
Feb 15, 2011
after my upgrades i noticed one hard drive was acting funny i was gonna reformat the drive anyway to totally remove winblows from my system grub was installed on the boot sector of the drive that failed how can i get the next drive in line to boot if some one can get me to a howto or tell me what i need to do short there of reinstalling the operating system.
View 5 Replies
View Related
Jun 11, 2009
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Jan 7, 2010
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
View 9 Replies
View Related
Oct 16, 2009
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
View 2 Replies
View Related
Jun 24, 2010
Schedule disk scan on boot Ubuntu. How do I do this?
View 1 Replies
View Related
May 18, 2011
I use clamtk to scan flash disk. It says the engine is out of date. What do I do to update it?
View 1 Replies
View Related
Apr 7, 2011
How to see/scan new EMC SAN lun/disk in RHEL 5?
View 1 Replies
View Related
Jun 10, 2010
The last few times, I booted ubuntu, the automatic disk check ran and told me that there were "serious errors on /". This had happened once before but that time, I found nothing wrong on booting into ubuntu. However, this time, the scan doesn't seem to progress any further after detecting the error. What is the problem?
View 7 Replies
View Related
Nov 8, 2010
I have ran into a bit of a problem. my server(10.10) is hosting a website with no problems whatsoever. I decided to install an extra hard drive, and format. i did both, and turned off my server after some more configuration. After a while, I decided that the new hard drive was a little loud for my liking, so I removed it. I had not put any files on it. I rebooted and saw a message that said this:Quote:fsck from util-linux-ng 2.17.2/dev/sda1: clean, 101202/2351104 files, 1516082/9393920 blocksI think that when I turned it off, it was formatting. How do I stop this from halting the boot? I can get by it by pressing the b or a key.
View 2 Replies
View Related
Dec 19, 2010
How to scan and fix Bad Sectors on Hard Disk without damaging data?
View 5 Replies
View Related
Jul 29, 2010
when I attempt to scan anything with clamav from a terminal I get the following error:
ERROR: Can't create temporary directory /var/lib/clamav/clamav-da584cb3f4ee38529f0460ad6f7dc632
Hint: The database directory must be writable for UID 999 or GID 100
Which I take to mean that there are no virus definitions installed. I use the "freshclam" command. Which results in the following error:
ERROR: Can't create temporary directory /var/lib/clamav/clamav-da584cb3f4ee38529f0460ad6f7dc632
Hint: The database directory must be writable for UID 999 or GID 100
View 5 Replies
View Related
Jun 21, 2011
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
View 6 Replies
View Related
Jan 14, 2011
While using my computer the other day (I was sending an email) it suddenly turned off. I didn't get any low power warning, but I was running on battery and had my iphone charging from a USB port.
As I didn't think there was low battery, I just turned it back on again. As it was booting I saw the battery light flashing, indicating low power. I went to get the charger, but before I got it, mid boot-up it turned off again.
This seemingly damaged something hard-disk-wise.
Upon turning it on again it dropped into busy box with some message similar to this:
Quote:
No init fount. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built in shell (ash) Enter 'help' for a list of build in commands
(initramfs)
That's not the actual message (copy pasted from another post) but the message is VERY similar to that.
If I "exit" busy box, I get a load of message about "kernel panic" before it freezes up.
I have booted a live USB (what I am using now). I thought since it wasn't cleanly unmounted, simply mounting and unmounting would do the trick. I was wrong.
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I had previously ran e2fsck (after checking it was unmounted) but it wouldn't run also because it was reporting that the device was already mounted, busy, or being exclusively used by a process.
I don't want to do any more for fear of causing further damage.
I am astounded that such damage can be caused so easily!
View 9 Replies
View Related
Feb 2, 2010
Recently, one the SMART utility said that one of the drives had failed and another drive was about to fail. I downed the box and hooked them up to my windows machine to run sea tools on them (They are all seagate drives). Sea Tools said that the drives were fine, while ubuntu said they were failing/dead. Yesterday I decided to try to fix one of the drives in the raid. I turned the server off, took the failed drive out, and restarted. Of course the raid didn't work because only 2 of the 3 drives were there, however it had been working w/ only 2 of the 3 drives for a couple months now (I'm a lazy college student). I turned it back off and back on with the drive there just to see if I could get the raid up again, but I havn't been able to get it to go. So far I've tried:
Code:
mdadm --assemble /dev/md0 /dev/sd[b,c,d]
mdadm: no recogniseable superblock on /dev/sdb
mdadm: /dev/sdb has no superblock - assembly aborted
[code]....
I'm looking for a way to trick the raid into working with just 2 drives until I can warranty the seagate and buy an external 1.5 TB drive to use as another backup. how to remove the bad drive from the array and replace it with a fresh drive, without data loss.
View 3 Replies
View Related
Feb 19, 2010
I have 2 USB drives. I have had 9.04 running on one for some time. I used Disk Creator in 9.04 to 'create' the drive. I use it as a reference to verify how things went in 9.04 if I hit a problem with 9.10.
However, after some months, when I tried this USB drive it produced this 'Boot Failure'. I followed up by checking the other USB drive which had Lubuntu installed via USB Disk Creator and it produced the same result ie 'Boot Failure'.
The Machine bios is set in the correct order.
I have tried to 're-do' things via 'Disk Creator' in 9.10 and 9.04 with the same result. It is not likely that both USB drives have failed at the same time.
Is Grub2 at fault in some way?
View 1 Replies
View Related
Jun 18, 2010
I have a fileserver which is running Ubuntu Server 6.10. I had a RAID5 array consisting of the following disks:
Code:
/dev/sda1
/dev/sdb1
/dev/sdd1
/dev/md0 -
the raid drive for the above three disks. The sda1 disk has failed and the array is running on 2 of 3 disks
/dev/sdc (OS disk)
/dev/sde (new 2tb disk - unused)
/dev/sdf (new 2tb disk - unused)
My plan was to rebuild the array using the two new disks as RAID1. Would the best way to do this be to create a new RAID1 disk on /dev/md1 then copy all data over from /dev/md0? Also - this may sound stupid but since all 3 drives in md0 are identical i'm not sure physically which disk is bad. I tried disconnecting each disk one-by-one then rebooting but the system doesn't appear to want to boot without the bad drive connected. I've already failed the disk in the array with mdadm but i'm unsure of how to remove it properly.
View 3 Replies
View Related
Dec 19, 2010
I went to setup my linux box and found that the OS drive had finally died. It was an extremely old WD raptor drive in a hot box full of drives so it was really only a matter of time before it just quit on me. Normally this wouldn't be such a big deal however I had just recently constructed an md RAID5 array of 3 1TB disks to act as an NFS mount for basically all of my important files. Maybe 2-3 weeks before the failure I had finished moving all of my most important stuff onto that array. Now I know that the array is intact. All the required data is sitting on those disks. Since only the OS level disk failed on me I should be able to get a new disk in there, reinstall ubuntu and then rebuild that array. how exactly do I go about doing that with mdadm? Do I create the array from the /dev character devices like when I initially built the array?
View 2 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Sep 14, 2010
Since I installed 11.1 and now 11.3 I haven't been abble to access my LaCie 500gb USB 2.0 external disk. So I asked LaCie support about it and they replied as follows:Windows 2k or SuSe Linux 11.0 can not see device in any USB 2.0 portsIs this a known problem and will it ever be fixed?
View 9 Replies
View Related
Jun 9, 2011
Following scenario: My server in some data center on a different continent with two disks and software raid 1.
One day I see that a disk failed (for example with /proc/mdstat). Of course I should replace the failed disk asap. Now that I think about it, I am not sure how. What should my email to the data center support guy mention to make sure that guy doesn't replace the wrong disk?
With hardware RAID it is very easy, because the controller usually has some kind of red LED indicator. But what about software raid?
View 8 Replies
View Related
Mar 20, 2010
I've been using dump/restore for backups, for quite some time. It's worked fine, but the process of recovering from a HD failure takes too long. What with eSATA and external drive docks, what I'd really like is to use rsync to maintain a current clone of my entire system drive. That is, start with a full disk clone, and then use rsync to keep it current.
I've seen plenty of instructions on how to do this with a directory tree, but I've seen none for doing it with a copy of the entire disk. If, for example, I copy /etc/fdisk, then the copied disk would have entries with the same UUIDs as the original disk. Which would mean that if the clone disk were to be bootable, its partitions would need the same UUIDs as the original disk. Which they would be, if the cloned disk started as a full-disk clone, I think. Am I wrong? But that means that when the clone disk was active, I'd have partitions with duplicated UUIDs. Is this going to cause problems? When I boot, will I get the correct partitions loaded?
View 4 Replies
View Related
Aug 18, 2010
I'm trying to do exactly this: [URL] the first time i did it, I made it and everything was fine, except I didn't know what "installation size" meant in wubi, so as I selected 3GB, the rest of the partition was left empty and I didn't have enough space for ubuntu. Then I formatted the partition again and reinstalled ubuntu. Since then while it's booting, I get the message Disk boot failure insert system disk and press enter. I tried reinstalling many times, but I still get this message..
View 6 Replies
View Related
Jun 10, 2010
I looking for advice on what is the best way for backup on opensuse in case hard disk failure .
I have opensuse as server running samba (with some share folder) and mysql and web service. for mysql backup I run cron job using automysqlbackup script that run 3 times a day (morning , lunch , evening).
in case of hard disk failure, I wish to be put every things on new hard disk in 1or 2 hours.
do I have to use disk imaging software ?
View 3 Replies
View Related
