Ubuntu Installation :: Installed But Gets Error Message- DISK BOOT FAILURE?
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
ADVERTISEMENT
Aug 11, 2011
I have a fresh computer with specs as such:
Hard Drive: Western Digital Caviar Black 500Gb 6Gbs Sata
Asus Sata DVD/CD Burner
Core i3 3.3GHz Sandy Bridge chipset
MSI P67A-GD55 Motherboard
Zotac GTS 450
I have a problem where the live cd gives this error message:
Boot failure, sleeping forever.
View 12 Replies
View Related
Oct 13, 2010
Although I have been running Ubuntu for about 1 year I still regard myself as a Newbee! I have got away with not knowing anything about the Terminal or Command Lines. I am happy with Ubuntu and have become familiar with the OS and all the software I require. However, I have started to receive an error message which states, DISK FAILURE IS IMMINENT Does this really mean that my hard disk needs to be replaced or could there be something else that needs "tweeking"? I am running two operating systems: Ubuntu 10.4 and Windows Vista - but am using Ubuntu about 99% of the time. Everything is running OK except for the error message. What is the best approach to address the issue?
View 3 Replies
View Related
Jun 25, 2010
After updating my motherboard BIOS, I'm now getting these error messages every time I boot up:
[ 16.157447] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.157488] ata3.00: failed command: SET FEATURES
[ 16.157525] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[Code].....
I've got a 200GB hard drive, using an ECS SiS 755 A2 motherboard w/1.1b BIOS.
View 1 Replies
View Related
Aug 30, 2010
Last night when I turned on my lap top (5 year old Acer TravelMate 4650), it was not able to boot up (10.04 LTS). No system files could be read and a lot of error messages was displayed. In fact, it has done a few checks for disk error lately during boot up, but no further warnings given. I gave up recovering, and simply re-installed Ubntu 10.04. I was wondering if this could be related to a virus attack?
View 9 Replies
View Related
Jun 10, 2010
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
View 1 Replies
View Related
Mar 18, 2010
Ubuntu/Linux operating systems. It installs just fine but after it reboots I get a "disk boot failure, insert system disk". I have searched around but I can't seem to find anything that works. There is only one hard drive in my computer and no other operating systems on it.
View 1 Replies
View Related
Oct 16, 2010
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized.
I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
View 2 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Feb 15, 2011
after my upgrades i noticed one hard drive was acting funny i was gonna reformat the drive anyway to totally remove winblows from my system grub was installed on the boot sector of the drive that failed how can i get the next drive in line to boot if some one can get me to a howto or tell me what i need to do short there of reinstalling the operating system.
View 5 Replies
View Related
Dec 14, 2010
Iv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies
View Related
Jun 11, 2009
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Aug 26, 2010
I tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"
View 9 Replies
View Related
Jan 7, 2010
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
View 9 Replies
View Related
Oct 16, 2009
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
View 2 Replies
View Related
May 7, 2011
A couple of months ago I bought a new Dell laptop with Windows 7 pre-installed. Rather than strip the hard drive and go with Ubuntu exclusively, I left W7 on and set up Ubuntu 10.04 as a dual boot installation. All was well for a month or more and now suddenly W7 won't boot. The Windows error message I get is The boot selection failed because a required device is inaccessible I've purged and reinstalled Grub2 several times with no luck. Also tried Windows fixmbr which allowed W7 to boot but made Ubuntu inaccessible. Below is the output of the boot_info_script.
[code]....
View 1 Replies
View Related
Aug 26, 2010
Every time I boot up FC13 I get a boot message which is showing a failed task. The line is as follows:
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1174 Segmentation fault "$@"[FAILED]
Everything appears to be running fine on my system. This message is more nuisance that a functionality message. But I could be wrong.
View 8 Replies
View Related
Jan 16, 2010
when i try to boot from the disk i burned, the screen show to lines of code, then pauses and never continues with any process.
View 1 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
May 21, 2010
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
View 9 Replies
View Related
Aug 17, 2010
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
View 3 Replies
View Related
Nov 8, 2010
I upgrade my f13 to f14 with preupgrade but after that i give this boot message.how can i fix this error?
Code...
how can i fix this error?
View 1 Replies
View Related
Sep 1, 2010
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
View 8 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Mar 28, 2010
I have currently installed Xubuntu via wubi on my windows XP. When I try to boot, it displays an error message stating that wubildr.mbr is missing or corrupt and I cannot boot into xubuntu.
View 2 Replies
View Related
Feb 19, 2010
I have 2 USB drives. I have had 9.04 running on one for some time. I used Disk Creator in 9.04 to 'create' the drive. I use it as a reference to verify how things went in 9.04 if I hit a problem with 9.10.
However, after some months, when I tried this USB drive it produced this 'Boot Failure'. I followed up by checking the other USB drive which had Lubuntu installed via USB Disk Creator and it produced the same result ie 'Boot Failure'.
The Machine bios is set in the correct order.
I have tried to 're-do' things via 'Disk Creator' in 9.10 and 9.04 with the same result. It is not likely that both USB drives have failed at the same time.
Is Grub2 at fault in some way?
View 1 Replies
View Related
May 24, 2011
I've been creating a website of late, and I've decided that I've come far enough along to get actual web development software (though gedit has served well). In Gnome, I have Bluefish, which is alright, but I also wanted something for KDE, since I also have Kubuntu 10.04 installed. I did some reading, and decided to see what all the fuss about Quanta Plus was about. I download the tar file, extract it, but when I run ./configure, it goes through a couple of steps and everything seems to be checking out okay.
Then I get an error message that says I am missing kde-config, and that I should check my KDE installation. I didn't do anything abnormal during the Kubuntu installation, so I can't imagine what I could do to check that installation. So then I go tot the INSTALL file, and try the alternative installation ./configure method, and I get an error message that says the the C compiler can't output an executable.
View 2 Replies
View Related
Jul 18, 2010
I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer. The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:
Grub loading
error: no such disk
grub rescue
I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem. The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.
View 1 Replies
View Related
Feb 1, 2010
I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer.
The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:
Grub loading
error: no such disk
grub rescue
I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.
I'm a noob to Linux. I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem.
The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.
View 1 Replies
View Related
