I am using 10.10, yesterday I did an upgrade using update manager. After restart, booting stops at login screen, keyboard and mouse is not working. I tried login into recovery mode as well as previous kernel versions nothing is working. I tried to login into single user mode even that is also not working.
View 2 RepliesI have Ubuntu 10.10 Desktop Edition i386 version. It was recently working fine until i installed few updates that showed in Update Manager about total size of 200Mb. During the installation BUG USB (blue screen) error comes and laptop restarted. Now i restarted the laptop and from now my mouse and the keyboard not working. I am not able to even login to the system. Not working now anything.. Details: I am running Ubuntu 10.10 Desktop i386 on VMWare Workstation on Windows Vista.
[Code]....
I recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?
View 2 Replies View RelatedRunning Landmarq Intel Atom DC330 Desktop I have just attempted to upgrade my desktop machine from Kubuntu 10.04 to Kubuntu 10.10. I used KpackageKit to do the upgrade which proceeded smoothly until the install packages phase, which seemed to complete and then repeat. I don't know the detail of what happened as I was out of the room.
The repeat almost completed, but then I got a set of error messages, which basically told me that KpackageKit was unable to install the upgraded packages. I closed KpackageKit, and closed the machine and tried a reboot. This time, I got as far as the splash screen, but although the cursor flashes, I can't type anything in the password box. In addition, the mouse pointer won't move. Using a different wireless mouse works, but I still can't type in a password.
However, the command ctrl+alt+sysrq+RSEIUB works, so the machine is accepting some keyboard input. I also know from using a live disc that my home directory is intact. I would like to revert to my 10.04 installation, and re-try an upgrade to 10.11 afterwards.
System was running fine under 8.04 but decided to update. The live CD works fine but after install, the Mouse and Keyboard stop working under 9.10. Even the keyboard power button is off. Disconnecting and reconnecting the keyboard or the mouse does not . AMD Athlon 64 X2 3800+ PS/2 Keyboard and PS/2 mouse
Everything else seems OK but how would I know without the keyboard or mouse. The keyboard turns off right before the first Ubuntu screen. The Numlock will go off and then nothing. Tried to run dpkg - fix broken packages after booting to repair. All I get is fail to fetch http: (whatever )Could not resolve us.archive.ubuntu.com. Update: Alt-F3 ... then Booting to terminal mode does not disable the keyboard.
I upgraded to 10.10 from 10.04 few weeks ago. Everything was working fine until today when I did a partial upgrade and it removed some of the lib files. Now my usb mouse and keyboard is not working. I can move the mouse around but can't click ( left or right ). I have nvidia graphics card. I tried running it under safe graphics mode and when I do that everything works fine except for the compiz obviously. I have tried reinstalling nvidia driver to see if that would make a difference but that didn't work either. I am not sure which lib files did ubuntu removed. I have searched everywhere to find a solution on the web and the only thing I think it might b iz my xconf file iz messed up. I really don't want to reinstall the whole OS and loose all my apps.
View 1 Replies View RelatedI'm having an issue installing Fedora 11. The install goes fine, but after restarting (when I get to the initial configuration screen) my keyboard and mouse don't work. I can boot into the Live CD without issue. My boot.log file is below:
boot.log:
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [OK]
Setting hostname Ste-PC: [OK]
mdadm: failed to add /dev/sda1 to /dev/md/imsm0: No such device or address
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: Started /dev/md126 with 2 devices .....
HAL is failing to start, could that be the issue? If so, how should I go about fixing it?
After installing KDE USB keyboard and mouse won't work. They are added to /proc/bus/input/devices though.
I also tried to install Gnome; same thing.
I took #usb-devices and they were there also..
But #usbhid-dump did not generate anything to screen.
I had an ill-advised upgrade from Ubuntu 9.10 to 10.04 (due to needing to beta-test a particular program). My gut told me that I shouldn't do it, but I went ahead and did it anyway. The problem that makes this worse is that I have an ATI Radeon HD 3650, and ATI hates Linux. So upon booting into 10.04 I ended up with no screen. It took a lot of futzing around in the terminal to get things going (including making an xorg.conf file). Installing the ATI proprietary drivers (Catalyst) was an epic failure. Trying to make "radeon" the driver? Epic failure, resulted in a completely unbootable system.
To at least get the system to boot, I deleted xorg.conf (since 10.04 allegedly will discover devices automatically without it) and played around with options in GRUB. Please see my attached menu.lst; that should be my only configuration. The other issue at this point is that my only working driver (that I can find anyway) is vesa. Unfortunately, when using Vesa, my mouse wants to scroll everything down and to the right. This means that if I open any window that has a scrollbar, it will move such so that the scrollbars are to the other end. This makes it all but impossible to make things work.
To make matters worse, now my WINE (specifically, Irfanview) cannot view GIFs. But at least I have a workaround (FTP) to get things to where I can work on them.) At this point I'd be satisfied if I could just get the mouse to stop messing up. I accidentally made it work at one point but I can't retrace the switches I set to make it so. I've tried setting a basic xorg.conf, an ATI-generated xorg.conf, and now no xorg.conf.
After upgrading to 10.4 from 9.8, my keyboard wouldn't work on the startup menu, I then went to the console and it worked perfectly. I'm new to Linux so don't know a lot about it. I also tried to reinstall it using:
sudo dpkg-reconfigure -phigh -a
But it always stops and return "This page is not dpkg-info anymore, but GNU install info
See the main page for ginstall-info for command line arguments:
install-info:No dir file specified; try --help for more information."
i have upgrade ubuntu 10.04 to 10.10 but after rebot. keyboard not working.I'm usiing PS 2 Keyboard..
View 1 Replies View RelatedBefore I upgraded, I used Ubuntu 9.04 on my Playstation 3. It worked absolutely fine. A couple of days back, I decided to upgrade to ubuntu 9.10 using the update manager. The installation process seemed to go fine, until I booted up the new version. When I booted up, my mouse cursor wouldn't move, whilst my keyboard worked fine, I unplugged and plugged it back in and swapped USB ports, but it came to no use. I reinstalled Jaunty and tried the entire installation process again. After installing the new version again, the same problem occured, my mouse just wouldn't work.
When I type in the command 'uname -a' it comes up with something (I apologize, I am a Linux noob) to do with the 2.6.24 Linux kernel, Ubuntu 9.10 is on the 2.6.31 kernel. Is this the problem? I don't understand what is going on or what the solution is. My mouse is a HP optical mouse if that helps. I can't bring up the terminal window because my mouse just doesn't work, which is really annoying me.
I recently upgraded to Ubuntu 10.04LTS. After completing the upgrade I lost use of the keyboard and mouse. I am able to type before the system loads but after loading- nothing.I tried connecting a USB mouse and that wouldn't work as well.
View 2 Replies View RelatedSo my computer was slow with Karmic Koala, so I tried upgrading my build to Lucid Lynx 10.04.
Now I can't login because neither my keyboard nor mouse (and touch-pad) work. However, I can access the command mode (terminal?) though through the grub boot menu.
how I can get my mouse (and touch-pad) and keyboard to work with Ubuntu 10.04? My machine is an Acer Aspire 4730Z. I dual boot with Windows 7, and I'd prefer not to have to clear out the partition for Linux and reinstall.
I messed up my xorg.conf and tried to put in a clean one, but it doesn't seem to work. I'm not sure what went wrong. When X loads, the mouse cursor is not responding and my keyboard is dead too. I can't toggle to text mode either (Alt-Ctrl-F1).Hope the following files might explain what's wrong./var/log/Xorg.0.log
Code:
[ 26.835] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 26.840] (II) No input driver/identifier specified (ignoring)
[code]....
Is anyone else having issues with their mouse/keyboard responsiveness via Synergy after upgrading to 11.04?
If I plug mouse and keyboard directly into the desktop the issue goes away. But when I connect via QuickSynergy and share my mouse/keyboard the mouse is very slow and has low sensitivity.
I just installed Ubuntu 9.10 on a dell d630 laptop and tried to connect an external ps2 keyboard and mouse using USB connectors to the laptop's USB ports. However, they are not detected by the system.
View 2 Replies View RelatedI was having a problem with the mouse and keyboard randomly failing to work after upgrading to version 10.04. I tried both the 32 and 64 bit versions. The problem went away after I edited the file /etc/default/grub and changed the following line:
from
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash noapic nolapic"
If you are unable to open a terminal window, try doing the following
Ctrl+Alt+F1
Log into you account.
sudo nano /etc/default/grub
After saving your changes and exiting nano you can reboot by using the halt command.(FYI Ctrl+Alt+F7 gets you back into X server -- but you need to reboot for the change to take effect) Update: problem recurred. I had to do Ctrl+Alt+F1 to log into a console. I executed 'ps aux | more' to find the PID for X.Using the PID I restart X with 'sudo kill -S SIGTERM <PID>'.Once it started up again it was fine.
Looking to buy a wireless mouse/keyboard for my wife. Want one of good quality that will work with Ubuntu 10.04 and is in current production. Even better if its a brand that Fry's or Newegg carries.
View 6 Replies View RelatedI have an Acer 5102 WLMi laptop from 2005 with Ubuntu 9.10 installed. It has worked fine for years but now when I boot up my mouse and keyboard don't respond leaving me stuck at the login screen. I have tried using a USB mouse without sucess. My USB-powered cooling fan still works in all three USB ports fine. I have tried booting into the LiveCD and got the same results except for the CD auto-logging in. Eht0 still auto-connects to the network fine in the LiveCD. I can't find any wrong except for the keyboard and mouse not responding. My next step is to burn a LiveCD with start-up scripts to enable ssh. Also the touch-pad doesn't respond either
View 4 Replies View RelatedI am running 8.10 64 bit on my laptop and when making a new user I noticed that on my shell prompt, it said "I have no name!". It was bugging me so I logged out and went to log back in. I got some error saying I was logged in for less than 10 seconds after trying a couple times to login. So I restarted and now my mouse and keyboard don't work!
View 1 Replies View RelatedI have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.
When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.
I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.
I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
After I updated to 10.10, my ps/2 keyboard and mouse stopped working when in the gnome environment.I have tried to solve this by following the instructions here:
http://ubuntuforums.org/showthread.p...mouse+-working
. . . and by turning off usb legacy in the bios
. . . and by running these commands:
Code:
sudo update-rc.d -f gdm remove
sudo update-rc.d gdm defaults 25[code]..But nothing has worked so far.
whenever I try to hibernate/sleep my computer and I come out of the sleep, the keyboard is not recognized and stops working altogether and requires a reboot. Changing the USB port does nothing either.
View 5 Replies View RelatedI've paired a bluetooth keyboard and mouse with my machine using the Gnome bluetooth wizard and the keyboard and mouse work fine. Then, if I let the computer sit for a few hours and then try to use the keyboard or mouse, nothing happens. When paired with my windows machine, and I start using the keyboard and mouse after a hour or two, the keyboard takes a second or two to start working again. I suspect that it turns itself off, and then has to reconnect, and that in Linux, the reconnection isn't working properly. I've found other instances on the forums of people with the same symptoms, but never any clear answers. Does anyone know what's going on?
View 1 Replies View RelatedI'm on a LG E500-VAP36P, with 3gb RAM, 250 Gb SATA HDD (Kubuntu Hardy kernel 2.6.27-9-generic), and my keyboard and my usb mouse don't work at the login screen. My touchpad works and my keyboard works in command-line session. This is my xorg.conf. I also attach a relevant part of my syslog.
Quote:
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
[code]....
Ive got a ClearCube Blade server installed with a mirrored clone of a Centos 5.4 system. Running X with GNOME. Upon starting the new blade, i find that I am having issues with the keyboard and mouse. When I plug in USB mouse and keyboard directly into the blade they work fine. When I hook the use mouse and board to the cport kvm, I don't even get any power to the devices. If I plug in ps2 mouse and board through the kvm, I get power and can use them in the bios but once Centos starts to load, they go dead. I have changed the kvm 3 times with new kvms, and I spoke with the manufacturer there are no incompatibilities with the hp mouse or keyboard or any reason why the usb ports wouldn't be working on the kvm for the devices.
View 7 Replies View RelatedI just install CentOS 5.6 on my computer. My mouse and keyboard stops working in 2 cases: 1. copy files from usb (FAT and NTFS); 2. update my system (specifically, when downloading update packages). But the system's still working. It seems weird but I can do nothing but reboot every time.
View 3 Replies View RelatedFirst I tried VNC. Easy install through Ubuntu GUI, but I could only see a still picture of the Ubuntu-desktop that wouldn't update. I could see on the Ubuntu monitor that the cursor was moving and the keyboard did work, but on my Windows computer, the screen didn't refresh. Then I read a bit on the forums and people seemed content with nomachine NX or freenx. After a bit of hazzle I finally managed to get a connection between my Windows and Ubuntu-machine. But the same thing happened here. I get to see a still picture of the Ubuntu desktop, mouse and keyboard working, but the screen doesn't refresh..!
View 1 Replies View Related