Ubuntu Installation :: How To Install Kernel-image-2.4.27-2-686-smp
Jan 30, 2010
I want to install package kernel-image-2.4.27-2-686-smp, but when i use terminal to install , write sudo apt-get install kernel-image-2.4.27-2-686-smp but couldn't find this package. In my synaptic i can't find this package to install. I downloaded from [URL] this package kernel-image-2.4.27-2-686-smp_2.4.27-12_i386.deb ,when i install , to appear error: "dependency is not satisfiable: initrd-tools", i downloaded this package initrd-tools and install but appear this error:"dependency libdevmapper1.02", in my synaptic i saw this package libdevmapper1.02 already installed.how to install package kernel-image-2.4.27-2-686-smp from terminal or from synaptic.?
basically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al Could not find kernel image: Linux boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
I need module init tools 3.13 or higher. I have tried to install them from .debs I've found but after doing the make install it doesn't install them! then it says to do depmod but nothing works still! Also my wifi is super slow I have a realtek 8192CU. If I tether my phone my internet speeds are normal.
In order to not post into the wrong forum, I am wondering if an issue related to performing a PXE based NFS install can be posted here, or does it belong in the networking forum? Seems that I've seen both, and I've done several searches using parameters/error messages that I'm seeing and can't seem to find a post that relates.
I have results of "./getinfo.sh network", and other necessary config file info ready to post, but want to make certain on correct forum.
i was recently trying to install ubuntu 10.04 on my laptop and it wont let me. I have it booting from a usb. I have everything set up right but before it installs it tells me that a kernel image is not working or something along those lines.
I've a problem running jessie on a XEN supervisor; my running kernel and the installed kernel image differ, because the host system forces the kernel at boot time. Current loaded kernel is
Code: Select all$ uname -r 3.18.12
But I'm not able to install this version from the standard repository.
Code: Select all# apt-cache search linux-image linux-headers-3.16.0-4-amd64 - Header-Dateien für Linux 3.16.0-4-amd64 linux-image-3.16.0-4-amd64 - Linux 3.16 für 64-Bit-PCs linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64 linux-image-amd64 - Linux for 64-bit PCs (meta-package) linux-image-amd64-dbg - Debugging symbols for Linux amd64 configuration (meta-package) nvidia-kernel-3.16.0-4-amd64 - NVIDIA binary kernel module for Linux 3.16.0-4-amd64 linux-image-2.6.32-5-xen-amd64 - Linux 2.6.32 for 64-bit PCs, Xen dom0 support
Now I'm facing issues loading kernel modules for iptables, because the module path does not exist. Is there an easy way to install a proper kernel image from the standard repositories?
I've been trying to get a live stick of OpenSUSE 11.2 running and I continuously get a script of "boot: could not find kernel image: gfxboot" running down the screen. Any other version of Linux will run fine off this same USB and I have not seen this error cited anywhere on these forums or Google.
I have Ubuntu 10.10 installed on my laptop.Its a dual boot with XP, have been using ubuntu/xp for a while now..Till now i always used to remove older kernel images after ubuntu update, then update grub and do "sudo apt-get autoclean" never had any problem at all.i skipped the second step, i removed the old kernel image and did "Autoclean" on apt-get but forgot to update grub.
Now after i have reboot, when grub loads i can see only 2 "Memtest" lines in grub list and 1 "windows xp" line.the "Linux kernel generic" line is missing. I can boot in xp (have done just that to post this) but since there is no line in grub list to boot into Ubuntu, cant boot in Ubuntu.Is there any option, something i can do at "Grub" to boot into Ubuntu?
I finished downloading of "openSUSE-11.1-KDE4-LiveCD-i686.iso" file. I downloaded it by Opera WB. Then using Nero I burned this file to CD. But there is a problem with boot. Please, make a support to this problem. Maybe file, which is in a site opensuse.org is damaged?
After the reboot of computer this text appears: ISOLINUX 3.63 0x49364136 Copyright (c) 1994-2008 H. Peter Anvin Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Loading Invalid or corrupt kernel image. boot:
I am currently running Fedora 10 XFCE on an Acer Aspire 1 (1.6ghz atom, 1.5gb ram, 8gb ssd). I am trying to install Fedora-11-i686-Live-XFCE via USB stick (Kingston 4gb) and am having no luck. I downloaded the .iso via bittorrent. If I use liveusb-creator: .iso passes checksum, installs boot image, installs syslinux, claims it's complete. When I try to boot, or simulate booting with qemu, I get the message "Could not find kernel image: linux" If I use
it says that the .iso passes checksum, installs live image, updates boot config file, and setup USB stick as a live image. Once again though, when I try to boot, or simulate booting with qemu, I get the same message "Could not find kernel image: linux"
I'm new to fedora and when I boot from a cd I get the message: could not find kernel image. I currently have windows xp and my motherboard is and ix38 quad gt if that helps.
I install fedora on my usb-hdd. Sometimes i boot it from real machine, sometimes i boot from virtual machine (kvm). When I boot from real machine, hdd driver is usb-storage, when i boot from virtual machine hdd drivers are ata_generic and pata_acpi.
Everytime i update kernel, mkinitrd only create initrd image contains only hdd driver current running, and I must recreate initrd manual with all preload hdd driver. How to config fedora to everytime update kernel, mkinitrd can make initrd image with all hdd driver I need?
I'm trying to run extract-ikconfig because I've mistakenly deleted an old kernel config that I'd like to recover. However, when running the script from the latest (2.6.32.5) tree I run into this error:
Quote:
ERROR: Unable to extract kernel configuration information.
This kernel image may not have the config info.
Coincidentally, this happens with all of my kernel images. Is it a fixable problem? I should really set CONFIG_IKCONFIG_PROC next time..
I've just purchased HP Mini 5103 with preinstaled SLED, but I want to replace with 11.3. But I have serious problem with booting from USB. Due to problem with BIOS bug/feature, 5103 is unabled to boot using USB with recursive partition (which is created from hybrid openSUSE-11.3-KDE4-LiveCD-i686.iso either with ImageWriter of dd). When I create bootable USB with syslinux and copying of iso to existing partition, I ended with error "failed to detect CD/DVD or USB drive" (I have tried also both initrdud files, older one failed with "failed to detect USB", newer with "failed to detect CD"). I have also tried to install from full openSUSE-11.3-DVD-i586.iso which I have copied to USB using Unetbootin, but with this bootable USB I ended with "invalid or corrupt kernel image".
I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i
Can I install ubuntu to an image file? I am using GRUB to boot my live cd, so is there a way to trick the installer into picking up an image file as another hard disk, like it is in wubi? (I am using mac)
I tried installing Ubuntu 10.04 WS on my PC but it did not see any disks to install on. I believe this is because my drives are all configured as RAID. My mobo is an Asus M3A78-EMH HDMI AM2+ socket with an Athlon 2X 5000+ CPU. The chipset is AMD 780G. I have the BIOS configured for RAID drives and I already run Win XP x32 and Win 7 x64 on it. My boot drive is configured as 'RAID READY' and I have 2 RAID 1 disks consisting of pairs of SATA drives.
From what I have researched it seems that with some tuning it should be possible to install Ubuntu 10.04 but I have little Linux experience and don't want to mess up my existing drives. I have installed Linux before a few times and run it but never with RAID. Is anyone aware of an existing disk image that I will be able to install from on my system or would it be possible for someone to create one for me to use?
I downloaded Fedora-12-x86_64-DVD.iso and placed it on a 16GB USB drive using the Windows LiveUSB creator which had downloaded when I first download Fedora 11.The USB boots fine and I choose the language and the the keyboard layout. I tell it the image is on the USB drive it displays /images/install.img as the image.
However after going through all the steps up to choosing where I want it throws an error saying cannot find image #1 on the hard disk.Now if I boot again and instead of choosing the USB drive I hit F2 and then choose the USB drive then /Images then the install.img and press O.K. it says it isn't and just cycles around the choose drive/image.
I have downloaded Fedora-15-x86_64-DVD.iso and try to install as usual:copy the isolinux directory from the image and boot with grub，but the installer doesn't let me select the media and connects and downloads from network directory. After waiting a long time,it reports the network not available, and ask me to select repo from NFS, DVD or http/ftp, still no local hard driver. Is this a new feature of F15?
I got to go to a competition and I have to use debian and win server 2008 in that comp. With the smallest (about 300MB) image, I couldn't add functions because the computer isn't allowed to connect internet, no APT. then, do I need to download all the images? I saw that full image was really huge.
I recently started trying fedora 10 out on live cd (in my case usb ) and loving it. I want to install it, should I get the dvd image, or would it be okay for me to just install off live cd (usb) and install whatever I want through the package manager later... Why/why not? Also on live usb, I can't find the package manager under applications.
i downloaded the gnome 3 based on fedora from www.gnome3.org. But when i run the image i dont see an option to install to my harddrive it just runs from my cd rom drive. Can any please lead me with instructions as to where and how i can install it to my harddrive.
I am trying to install 11.2 on a system with RAID-1 /boot partition and RAID-10 /(root) partition. I have done this before with 10.3 but am hitting a wall with 11.2. In particular, the boot image loads and then halts when it tries to load the RAID-10 root partition saying that the personality is not laoded. modprobe shows that the raid10 module does not appear to be part of the boot image. I cannot find anything in the installation that will allow me to specify a module to include in the init image. How do I tell the installer to include an additional module?
I decided today to try Xubuntu on my netbook.I downloaded an ISO of it, formatted my old 2GB Sandisk Cruzer Micro, and used Unetbootin to copy all the stuff onto the drive.Of course with flashing cursor after "boot:". So I tried rewriting with Unetbootin, and then even tried writing an ISO of Kubuntu to the flash drive.Each and every time, I get the same message.
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
i have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!
OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"
I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!
Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!
Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.
I have installed the fedora 14, but there is no kernel source tree.I read the doc "building a custom kernel".But I don't want to rebuild a new kernel.I just want to install the source tree of current kernel.Could someone tell me the way?
Other than the linux kernel image I am using is it ok to remove the others I have and thus gain more disk space ? I only have a small asus 900 netbook.
