General :: New Install Of Ubuntu 10.04 LTS Boots To BusyBox?
Jan 25, 2011
As the name says, I'm new to Linux. I've never even seen Linux. Super noob. I have installed Ubuntu 10.04 onto a Dell Dimension 2350 P4 1.8ghz, 1g ram, GForce 4x 128mb video card running XP. I installed from a Live CD and rebooted. The screen says "finishing Ubuntu install" does a countdown and loads into BusyBox instead. This is what I see:
BusyBox v1.1.3 (Debian 1:1.1.3-5ubuntu7) Built-in shell (ash)
Enter help for a list of built-in commands.
(initramfs)cannot mount /dev/sda1/tmpmountpoint
If I boot from the CD I get: Unable to find a medium containing a live file system I'm stuck, I don't know many commands so step by step. Simply saying 'load grub' means nothing to me.
View 1 Replies
ADVERTISEMENT
Aug 4, 2010
The system is an old AMD Duron 650MHz that was dug out of the garbage, trying to set it up as a light duty server. I installed ubuntu 10.04 with no errors or troubles during the install, however whenever the system is booted it sits at a cursor for about a minute then goes into busybox giving the error "Gave up waiting on root device." and says that the hard drive does not excist. If I sit at busybox for about another minute and type exit it then boots ubuntu 10.04 with no errors or issues.
View 7 Replies
View Related
Jan 8, 2011
Howto install busybox with Gnome on a USB memory stick and make it bootable?
[URL]
View 2 Replies
View Related
Apr 30, 2011
I've tried both the DVD and CD, the CD with both usb-creator-kde and unetbootin. The results are the same always, the USB boots, into the splash screen, I select Start Kubuntu, it goes to the loading screen. After some seconds it starts scrolling a wall of text, gives some error about not being able to write or read /root/var/* because they don't exists and end up on a BusyBox with (initramfs) prompt.
I need to install the system on a new disk (2tb) instead of upgrading because I have to send the current one (1tb) to replacement. Could the large 2tb disk be a problem? I tried unplugging all disks and leaving just the disk I want to install to, but no deal... (both are SATA).(Checked the md5sum and they both match for DVD and CD...)
View 9 Replies
View Related
May 8, 2010
I was having a hard time installing Xubuntu on a an old Japanese FMV Biblo LOOX S73A, with no internal drive. trying both from a USB stick and from a CD ( I think the USB's were USB 1's, not sure) but it was finally rolling with the CD---the bios lists USB booting- yet things happen, power shortage and the battery was out-
I'm stuck with a broken Xubuntu intall I have 3 grub options, regular, recovery mode and mem test I've tried to reinstall forcing the computer to boot from the CD in the bios, but get "no os found" If I let it boot from the hard drive, I get to Busybox/initramfs commands that I know nothing of. I just want to do a clean reinstall of the whle thing, but cannot find out how to do so. as mentioned this bios has an option to boot from USB CD ROM DRIVE, hard disk, or floppy
[Code]...
View 4 Replies
View Related
Mar 23, 2011
After installing the ATI graphics driver that was suggested under System > Devices, ubuntu required a reboot. now it either hangs on boot, or boots into the Bash shell. I tried the option in the Grub boot llist to boot into recovery mode, and then teh option to fix recent update (or something like that), but it did not help.
Assuming the ATI driver is the problem, how can I back it out?
View 2 Replies
View Related
Sep 27, 2009
Prior to posting this I entered search arguments, "Busybox," then "initramfs" to attempt to find another user who may have experienced the same thing; if the solution is imbedded in the message threads, I must have missed it. On hand is a Ubuntu Server 8.04.3 installer CD. What works: Installs to a Mac Pro under both Parallels, and then under Fusion both were successful first try.
Install to a newly purchased 2 gig Acer Aspire One seems to have succeeded, but upon launching from Grub, Busybox/initramfs intercepts and halts the launch with an error I don't understand:
Starting up ...
Loading, please wait ...
Check root = bootary cat /proc/cmdline
[code]....
The new Acer-PC Aspire One was partitioned into four 80 gig partitions using the Paragon software to do the partitioning. XP is on the first, and Ubuntu Server on the next 80 gig partition. Install was "successfully" done from a Lite-On external CD/DVD over USB.
During the install I changed the default name from Ubuntu to something else (probably a bad idea), and I naively entered "/" root to answer the mount question (finding nothing to tell me what to do). Ubuntu required a disk driver choice from a long list - finding no reference or guidance as to what to enter, I naively entered IDE Generic, and it took (I guess it "took").
FWIW the Ubuntu installer didn't require me to indentify the mount entry or the disk driver during installs on my Mac (Fusion/Parallels).I did connect the Internet during the install. I did checkoff/install LAMP during the install from CD. Goal: To use Joomla in a mock server environment.
View 3 Replies
View Related
Apr 30, 2010
Why use nash instead of busybox in initrd and initramfs? I'm just looking for pros and cons of both really (and any other applications with similar functionality). I'm currently leaning towards busybox being the better option, why redhat and fedora use nash in their initrd.
View 2 Replies
View Related
Feb 26, 2010
I have a Linksys WRT54G with the Tomato firmware on it. So the system running on the router is Busybox 1.14., which as far as I know is Linux-based. I want to update the busybox to the newest version, using ipkg which is the only package manager it has installed on it. By the way, I use telnet to access the router. So I use # ipkg install (the url to newest busybox release) but at some point it stops and says:
mkdir: cannot create directory '//opt/usr/': Read-only file system
so what can I do? How can I make the filesystem read-write?
View 1 Replies
View Related
Apr 28, 2011
I am building a floppy linux distro and have compiled a custom kernel, toolchain, uClibc and busybox. It all fits and boots but says "Failed to execute /busybox attempting defaults" /busybox is executable and should have the shared libraries available. I created both a dynamic and static hello world program and nether will boot as init. The root fs mounts without issues. What is the problem? (Sorry, Do not have the log since this is a different box) (May try to get it over serial console)
View 9 Replies
View Related
May 30, 2010
I have tried numerous times to install ubuntu 10.04 through a CD and it always fails to boot. I get a message similar to this one: "BusyBox v1.10.2 (Ubuntu 1:1.10.2-2ubuntu7) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) -"
I have ubuntu 9.10 installed at the moment, and when I update it to 10.04, through update, I still get the same message.
If I were installing from a cd like I was, I could MD5 test the ISO I downloaded and check the CD for defects, but what about when all I'm doing is updating from the update manager?
View 7 Replies
View Related
Sep 24, 2010
I'm trying to run a shell script on a kern board (av1100) that shows some text output on the attached screen. The big problem is that the screen goes to blank in like 2 minutes.I'd just like to have the script showing it's output while the thing is on.Isn't there a command to stop the screen from going to blank?p.s. there is no bash available, just #!/bin/sh
Code:
#!/bin/sh
###########################################################
[code]....
View 2 Replies
View Related
Oct 29, 2010
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
View 14 Replies
View Related
Mar 19, 2010
recently I have installed a brand new machine with 11.2. Machine boots so incredibly fast so I decided to upgraded another older machine from 11.1 to 11.2. Upgrade went fine but old machine boots significantly slower. On new I see message "doing fastboot" and few seconds later KDE starts loading. Amazing. On old I just experience regular boot, speed is comparable to old 11.1.What am I missing after upgrade? Same kernel, almost same set of services. Both machines are pretty regular PCs/x86_64, however old one have faster/better hardware (more cores, more GHz, more RAM, 2 disks in software raid-0).
View 1 Replies
View Related
Dec 14, 2009
I downloaded the live cd iso and installed it on usb using this command (while it was unmounted):ddif=open SUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdc bs=4M...I then restarted and it loads into a main openSUSE screen, I choose the "OpenSUSE 11.2" and it starts loading. Then it shows the progress abr under the gecko guy and it starts to load, that moves to a few diff. places on the screen and then it goes black. Any ideas?
View 7 Replies
View Related
Aug 14, 2011
I have run into a problem trying to do a DVD upgrade from 11.2 -> 11.4. My computer is setup correctly to boot from DVD ...it boots successfully from the 10.1, 10.3, 11.2 DVD so I don't think there is an issue w/ the BIOS config.
I have run md5sum on the DVD and the generated sum agrees with the values posted on the 11.4 download page so I don't think my media has been corrupted.
When I put in the 11.4 DVD and reboot the machine I see flashing from the DVD activity light and hear the disk spinup.....then it boots 11.2 from the harddisk. how to troubleshoot this...
View 9 Replies
View Related
Feb 21, 2011
I decided to dual boot install Ubuntu with my Windows 7. After a lot of hair pulling, i finally managed to boot the live cd environment with "nomodeset". From there i installed ubuntu. When it finished installing, i booted to the new ubuntu install only to be presented with a command line login. If i change the boot line from "quiet splash" to "nomodeset", i can coax ubuntu to boot in low graphics mode. However this is not a permanent fix, and doing so causes a 2 inch offest of the screen on the right hand side. Only the have the missing 2 inches appear on the left side. If from the "Ubuntu is running in low graphics mode" message, i select "console login", and type "startx" i just comes out with "X Server Fatal error- No Screens found". I also tried:
Code:
But it still didn't help. I'm running out if ideas here, can anyone point me in the right direction?
This is a cd that i got free from Canonical themselves. It's Ubuntu 10.04 LTS, and I have Intel Integrated Graphics.
View 1 Replies
View Related
May 8, 2011
I am fairly inexperienced with Linux. I'm good with windows and PCs in general. I've been wanting to setup a Linux environment for teaching myself some programming so I downloaded Ubuntu 11.04 to install on my main Windows desktop.
I have two internal HDDs and an external HDD. Each of the internals is 160GB and the external is 1TB. I have Windows on the drive in SATA0. I split the drive in SATA1 into 3 partitions. I Windows Disk Management to shrink the NTFS partition to 100GB for storage. I used gParted to create a 2GB swap partition the rest is a ext4 partition So sda1 is NTFS, sdb1 is swap, sdb2 is ext4, and sdb3 is NTFS, and sdc1 is NTFS
I mounted sdb2 as root and installed Ubuntu there. I chose the manual option for the installation as the install alongside Windows option only showed my external HDD (sdc). I wasn't sure where to place the boot loader so I tried to overwrite the Windows boot loader on sda but that failed with an error about no file system available or compatible. I figured Grub2 doesn't work on NTFS......
View 5 Replies
View Related
Mar 26, 2010
sometimes it starts but after login (auto login) my wallpaper appears but there in no desktop (taskbar, icons, menu!) and i can't do anything!sometimes if i reboot it goes well sometime not!first time i install openSUSE, i tried to install my VGA driver (Nvidia 9400) but it fails and then i can't boot anymore so i removed and installed openSUSE again!i thinks there is something about graphic and specially Desktop Effects! i don't want to turn it off because it's very nice
View 7 Replies
View Related
May 3, 2010
I have just installed Xubuntu 10.04, on my Mac pro. I have OS X snow leopard on one hard drive (sd1), and I put lucid on another hard drive (sd2) (both SATA). The installation went perfectly.
The issue is that I cannot boot Ubuntu, the screen briefly flashes some colors, and then displays a blinking cursor. The screen is unresponsive to the keyboard, at this point I have to restart the computer.
My assumption is that there is a problem with my NVidia card and the drivers, but I am not even sure that grub loads as I cannot see anything until the blinking cursor comes up. Is there a way that I can boot into safe mode, and then install the proper video drivers? I must use OS X for the moment.
View 9 Replies
View Related
May 11, 2010
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies
View Related
May 22, 2011
My setup: a work laptop that has a corporate Win7 image, and to which I have added a few partitions to try various linux distributions. The MBR is governed by Lilo from the Slackware 13.37 installation in /dev/sda5. The MBR boots no kernel image directly, it only chainloads the boot sectors of partitions /dev/sda1, /dev/sda5, /dev/sda6 and /dev/sda7. The latter three are formatted ext4.The Win7 boot mechanism traditionally resides in /dev/sda1, and the linux distros are required to install their boot machines into their respective partitions.
What I am trying to say is, I installed Ubuntu 11.04 into /dev/sda7, and told the grub installer the same thing: install yourself into the boot sector of /dev/sda7. Kudos btw for the Ubuntu installer, it comes across as a very professional piece of software.
View 9 Replies
View Related
Jul 17, 2011
I recently bought a Samsung 900x3a which is a very neat machine. However, I have some trouble trying to get ubuntu to run on it at all.Here are my symptoms / information :
- Live USB runs well
- Installation runs well
- Trying to install dual operating systems (Windows + Ubuntu)
- Installation terminates well
- If I reboot in LiveUSB, I can see my new "Ubuntu" partition with all the operating system files on it.
Does any of you have an idea of how I could possibly solve this issue without messing up my Windows environment ?
View 1 Replies
View Related
Jan 31, 2010
I have a laptop that runs openSUSE 11.2, KDE 4.3.*. I've connected an external monitor to this laptop. The problem is my laptop screen is broke and I want Linux to use my external monitor as the master output. When ever I boot it's always the laptop screen that's taken as the master and my external monitor always have the resolution of the laptop. What I want to do is disable the laptop screen and change the resolution of my external monitor when the computer boots. The following commands seem to do what I want
[code]...
View 6 Replies
View Related
Apr 15, 2010
I'm relevant with linux but I don't know how to make it so that when the computer boots up it asks me to login. Right now it just logs my user in.
View 3 Replies
View Related
Apr 19, 2010
Using 11.2 on self-built pc with AMD 9950 on Asus M3n78 Pro mobo. Boot drive is sata, with an external ntfs 1.5 tb USB/firewire/externalSATA connection (using USB at the moment.) nVidia 9800 GT video card (8300 gt on mobo.)It takes literally hours to boot up and more hours to shutdown this system.e point I am ready to hit hardware reset to continue. This is the 5th cycle with the same problem recurring each time, except sometimes boot occurs in a normal amount of time, but shutdown/reboot always takes hours.
View 4 Replies
View Related
Aug 16, 2010
Computer: Toshiba Satellite A505D laptop
OS: Suse 11.2, installed from Linux Pro Magazine disc -- was running fine after formatted install (dumped Vista), been running it for a month.
Situation: Saturday, I went to an installfest for help getting my Pantech UM-175 USB aircard to work with my new laptop. One of the guys there got it running, and then we downloaded all of the updates. Following download, I shut down the laptop and hit the road. I got home last night, booted the computer a little while ago, and it came up to a command prompt rather than KDE. I was able to log in on the command prompt.
Cold and warm reboots gave the same results, as did Failsafe boot. I am assuming that something in the updates cut off KDE from starting. We did several cold boots at the installfest and it was working fine after the modem install, but BEFORE downloading the updates.
1) How do I manually launch KDE?
2) How do I get KDE to autoload again?
3) Is there anyone in the Reno, Nevada area who is a Suse guru, or are there install fests near Reno?
View 9 Replies
View Related
Mar 22, 2011
So after research decided to go with OpenSuse 11.4 distro.
Installation had no problems but when I try to boot into the normal mode it just gets stuck on the screen that has a loading bar. The loading bar never makes any progress. After having waited for 15min I shut down and booted from failsafe mode. That worked fine twice only and then it prompts me in the command screen for login and password. After I input both it tells me to enjoy but Im still stuck at prompt screen, never loads GUI.
Im now booting windows on my acer Aspire 5633wlmi. It has a Intel Core 2 duo t5500 processor which I understand is 64 bit. So the version of Linux I downloaded was the 64 bit one.
View 9 Replies
View Related
May 5, 2011
I'm trying to create a bootable install of Ubuntu 10.04 which boots off an 8GB Kingston DataTraveler USB stick. I used the latest Universal USB installer from pendrivelinux to install it, and I used the I386 ISO of Ubuntu 10.04. It successfully installed to the USB stick and I enabled 4GB of persistence. However, when I put it into any machine it gives me the following message:
Mount: mounting /dev/loop0 on //filesystem.squashfs failed: No such device (initramfs) Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs I tried redoing it, and redoing it without persistence enabled, but still no luck.
View 2 Replies
View Related
May 1, 2010
I did the update from within 9.10 to 10.4. Now when Ubuntu boots up, something happens and it goes to busybox. I tried sitting there and waiting, but nothing happened. So I tried typing exit, and then about a minute or two later it finally finished booting.
It's real nice that everyone else is reporting 20-30 second boot times, but before with 9.10 my boot time was around 60 seconds or so, and now it's around 5 minutes. So how can I fix this? Is there a way to post the boot log here? Where would it be located at on my computer?
View 1 Replies
View Related
