Ubuntu :: Retrieving Files From BusyBox?
May 8, 2011I've been having a problem with this "BusyBox", and unlike windows, my files are not able to be "stolen" to another operating system. I need to get my files back from /home back.
View 1 Replies
ADVERTISEMENT
Ubuntu :: Retrieving Files From Root.disk?
Jun 24, 2010So I had a problem with my ubuntu 10.04 on wubi. so i saved the root.disk and uninstalled it then reinstalled unbuntu 10.04 as another partition. I did the mount thing with the root.disk and now and trying to move files over. I need permission for that and its asking me for a sudo password and i didnt set one. i tried using sudo bash and its also not working.
Code:
igor@igor-laptop:~$ sudo bash
root@igor-laptop:~# mv '/mnt/usr/share/themes' '/usr/share'
mv: inter-device move failed: `/mnt/usr/share/themes' to `/usr/share/themes'; unable to remove target: Is a directory
Ubuntu Installation :: 10.10 Stalls While Retrieving Files?
Dec 4, 2010I'm installing 10.10 on a Dell laptop it appears the installation has stalled while retrieving file 26 or 64. It's been on this file for about an hour now.
View 9 Replies View RelatedUbuntu Installation :: Retrieving Files After A Format ?
Jan 12, 2011A co-worker was asking me if there was a way to recuperate his child's baptism photos from his HD after it had been reformatted following a crash. I heard that this was possible and even downloaded a few trial programs, but have yet to try them.
View 2 Replies View RelatedUbuntu :: Stuck At Intramfs/busybox. How To Backup Files?
Oct 20, 2010i find myself in a situation very similar to here. [URL].. when i try use boot a live disk off my flash drive, it gives me the same issue. right now, i was just wondering how i would be able to get all my files off of my hard drive and onto an external drive so i may just format and reinstall everything on my computer.
any tips on how to do a simple copy over through the busybox or intramfs?
Ubuntu Installation :: Retrieving Files From A Secondary Reiser Disk
Oct 19, 2010I've been running various releases of Suse Linux on my home PC for about 6 years (currently running Suse 11.2). The old hard disk in that machine is starting to experience read errors, so I bought a new disk to put into the PC which otherwise works fine.
So I figure now is a good time to give Ubuntu a try. I plan to install the KDE version of ubuntu on the new drive, but once that's finished I will want to mount the old disk and copy as much as I can off of it onto the new disk (JPEGs, old documents, stuff under my home directory.
The old disk uses Reiser. I have read various threads concerning problems with mounting Reiser FS disks under ubuntu, but many of them are old so it's not clear to me what the current status of support for Reiser in ubuntu is.
I am planning to do the following:
1) Remove the old disk from the PC, put the new disk in its place.
2) Install kubuntu on the new disk.
3) Put the old disk back into the machine along with the new one with the old one being the slave/secondary disk so that when I power up the machine, it will be running ubuntu off of the new disk.
At this point I will want to mount the old disk so I can then start copying files off of it.
What do I need to do to mount the old disk, keeping in mind it uses the Reiser file system?
General :: Retrieving Files From Damaged LVM Disk On CentOS 5.5?
Nov 3, 2010I'm running CentOS 5.5.
A couple of weeks ago, my 500 GB disk crashed after suffering an accelerating error rate for a couple of days.
Now that I have a new disk in place, I want to mount my old disk, which is (was) an LVM disk, as a second disk and recover files from it if possible.
The question is, how do I go about this?
If I mount the old disk:
# mount /dev/sdb1 /sdb1
the top-level directory shows only two subdirectories:
lost+found, which is empty; restored, which is an image of files recovered from old disk's predecessor.
'df' shows (or appears to show) that the disk is 11% full. Sorry, I don't recall how full the disk was before it crashed.
How do I get the system to recognize the LVM structure on the old disk & mount it?
Or is the directory structure too corrupted? Do I need to send the disk out to a recovery service?
P.S. Have aleady done some poking around with lvmdiskscan, which shows the old disk whether it's mounted or not, and vgchange -ay, which doesn't appear to do anything.
Hardware :: Retrival Partial Files From Lto 4 Tape Instead Of Retrieving Complete Tape
Apr 26, 2010I want to know how to retrival partial files from a lto 4 tape instead of retrieving the complete tape.
View 2 Replies View RelatedUbuntu :: Upgraded To 10.4, And Now Goes To Busybox While Booting?
May 1, 2010I did the update from within 9.10 to 10.4. Now when Ubuntu boots up, something happens and it goes to busybox. I tried sitting there and waiting, but nothing happened. So I tried typing exit, and then about a minute or two later it finally finished booting.
It's real nice that everyone else is reporting 20-30 second boot times, but before with 9.10 my boot time was around 60 seconds or so, and now it's around 5 minutes. So how can I fix this? Is there a way to post the boot log here? Where would it be located at on my computer?
Ubuntu :: Busybox After Most Recent 10.04 Update?
Sep 4, 2010I installed all recommended updates as suggested by the update manager, after installing was asked to restart. During this restart I get the error message "udevadmin trigger is not permitted while udev is unconfigured. After this I am left with a BusyBox v1.13.3 [...] (initramfs)_
View 1 Replies View RelatedUbuntu Installation :: BusyBox V 1.15.3 Error
Oct 13, 2010Last week I took up the courage to replace my windows 7 completely with Ubuntu 10.04 (Lucid). The Installation went fine and was happy with it.
And then on 10th I upgraded from 10.04 to 10.10 (so called perfect 10), when the laptop restarted it showed me BusyBox v 1.15.3 message on the Boot screen.
Ubuntu :: Cant Boot Only Shows Busybox
Apr 21, 2011there mylaptop crashed due to extensive heat and i cant boot back to my ubuntu system. every time i try to boot back i get an error message and it only shows BusyBox this happened to me before but one day it just miraculously boot back, now that it happened again im afraid that ill have to reinstall so i went here...
here's the error im gettin
mount: mounting /dev on root/dev failed: No such file or directory
mount: mounting /sys on root/sys failed: No such file or directory
mount: mounting /proc on root/proc failed: No such file or directory
Target filesystemdoesnt have requested /sbin/init
No init found. Try passing init= bootarg.
Busybox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for alist of built-in commands
Ubuntu :: Retrieving Openpgp Key In Natty?
Jun 18, 2011im trying to register my openpgp key in launchpad
Quote:
Importing an OpenPGP key
To import your OpenPGP key into Launchpad, you first need the key's fingerprint.
Note: You must ensure your key is in the Ubuntu keyserver before you try to add it to Launchpad.
Retrieving the key in Ubuntu
The easiest way to generate a new OpenPGP key in Ubuntu is to use the Passwords and Encryption Keys tool. If you are using Ubuntu 10.04 or an earlier version, it is located at Applications > Accessories > Passwords and Encryption Keys. In Ubuntu 10.10 and later versions, it is located at System > Preferences > Passwords and Encryption Keys.
Step 1 Open Passwords and Encryption Keys.
Step 2 Select the My Personal Keys tab, select your key and open the property window by pressing Space Bar or double clicking with your pointer. Select the Details tab of the property window.
Step 3 Select the Fingerprint text (the ten blocks of numbers and letter). Copy the text by pressing the Ctrl+c keys together.
Retrieving the key using the GPG command
Open a terminal and enter:
gpg --fingerprint
GPG will display a message similar to:
pub 1024D/12345678 2007-01-26
Key fingerprint = 0464 39CD 2486 190A 2C5A 0739 0E68 04DC 16E7 CB72
Geoffrey Hayes (My OpenPGP key) <geoffrey@bungle.com>
sub 2048g/ABCDEF12 2007-01-26
Highlight and copy only the numeric fingerprint: 0464 39CD 2486 190A 2C5A 0739 0E68 04DC 16E7 CB72 in the example above.
so i followed these instructions, and there was nothing in my "personal keys", same for the command. so my question is how do i get the fingerprint to be able to register my key in launchpad?
Ubuntu :: Retrieving Windows 7 Product Key?
Jul 16, 2011I've got a laptop here where the Windows product key has been torn from the bottom. Windows will not boot up on this laptop (it blue screens). When I remove the hard drive from the laptop and install it into my working Windows computer, the partition shows up as "raw". However, the partition mounts under Ubuntu just fine, so I'm wondering if there are any Linux tools that will allow me to retrieve the Windows 7 product key, from within Linux...
View 1 Replies View RelatedUbuntu :: Retrieving Gmail Password From Evolution?
Sep 2, 2010I have several Gmail accounts. On one of my Ubuntu-running computers (Hardy) Evolution remembers the passwords. Which is a good thing, as I can't remember one of the passwords.
When I'm out and about with my netbook, I like to check my email. But I don't use Evolution on the netbook; I access the Gmail accounts via the web. And because I can't remember the password for one account, I can't check it.
Obviously, on my Hardy desktop, Evolution/Ubuntu remembers the password - so it must be stored on the computer, right? How do I get Ubuntu to tell me the password?
Ubuntu Installation :: Getting BusyBox When Trying To Install Natty From USB?
Apr 30, 2011I've tried both the DVD and CD, the CD with both usb-creator-kde and unetbootin. The results are the same always, the USB boots, into the splash screen, I select Start Kubuntu, it goes to the loading screen. After some seconds it starts scrolling a wall of text, gives some error about not being able to write or read /root/var/* because they don't exists and end up on a BusyBox with (initramfs) prompt.
I need to install the system on a new disk (2tb) instead of upgrading because I have to send the current one (1tb) to replacement. Could the large 2tb disk be a problem? I tried unplugging all disks and leaving just the disk I want to install to, but no deal... (both are SATA).(Checked the md5sum and they both match for DVD and CD...)
Ubuntu :: Recover From Busybox / Initramfs 8.04 NTFS?
May 22, 2011I either installed Hardy heron or its predecessor by accident, but began running it exclusively. I did it way back when while trying to create a test drive disk, and I did not repartition the drive, because all my windoze NT stuff survived. I'm now 8.04. Yesterday I had a bunch of updates to do, did them, closed a ton of windows and then pulled up 3 open office files and each, when it came up said there wasn't enough space to save all needed information as they opened. I then closed them and one hung and froze the whole machine, leading me to do a reset. This is BEFORE rebooting from the updates.
Now when I boot into Ubuntu (I'm dual boot) I start to get the opening Ubuntu GUI screen but then get :
BusyBox V1.1.3 (Debian 1.1.1.3-5ubuntu12)built in shell (ash) line followed by:
initramfs)
I'm essentially a total noob, I've rarely used command line and not for a long time. I made a version 11.04 live disk, and it says that the file system is clean, but will not show me any of my old files, only the NT files and directories. I have a ton of unbacked up important data in Hardy Heron so I don't want to do an install from the 11.04 CD.
I've read several threads so far, and can't seem to find anything addressing this that I understand. The drive is a 160GB drive on an HP Pavilion dual core that has a 154GB NTFS boot partition, which is where I'm sure the Hardy Heron files are, and a 6GB FAT32 HP_RECOVERY partition that windoze lists ad drive D (the NTFS is C) The live disk says the FAT32 partition is /dev/sda1 and the NTFS is /dev/sda2
Where should I start? I've seen stuff about booting into recovery mode, but that isn't an option when I boot from the hard drive, and the only older ubuntu disk I have is for 7.something and generates "defective CD" type error messages.
Ubuntu :: Booting Into BusyBox Built-in Shell
Jun 30, 2011As far as I know the power went out once and my computer might have been on - now Ubuntu won't boot correctly. It boots into 'BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)'.
Code:
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init= bootarg.
BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)
(initramfs)
Ubuntu Installation :: Broken System - Busybox ?
Aug 18, 2011I've got Ubuntu 11.04 on a 40G hard disk in dual boot with a Windows XP on a 300G hard disk.
I've got back data with an USB key from a broken Windows Seven, then I've shutdown my ubuntu, but it has difficulties to stop (a mp3 player, which doesn't work well, has already damaged my Ubuntu previously). Then my Ubuntu doesn't manage to boot : it launches "Busy Box" with "initramf". When I boot in recovery mode it fails to boot something at 5s then it tries to launch something constantly.
I've launched a live CD in order to recover my data, but when I try to mount my hard disk I get :
Code:
I've found this link about this problem : [url], but it's too complicated for me.
I just want to recover my data, a system reinstallation wouldn't bother me.
General :: New Install Of Ubuntu 10.04 LTS Boots To BusyBox?
Jan 25, 2011As the name says, I'm new to Linux. I've never even seen Linux. Super noob. I have installed Ubuntu 10.04 onto a Dell Dimension 2350 P4 1.8ghz, 1g ram, GForce 4x 128mb video card running XP. I installed from a Live CD and rebooted. The screen says "finishing Ubuntu install" does a countdown and loads into BusyBox instead. This is what I see:
BusyBox v1.1.3 (Debian 1:1.1.3-5ubuntu7) Built-in shell (ash)
Enter help for a list of built-in commands.
(initramfs)cannot mount /dev/sda1/tmpmountpoint
If I boot from the CD I get: Unable to find a medium containing a live file system I'm stuck, I don't know many commands so step by step. Simply saying 'load grub' means nothing to me.
Fedora :: Retrieving File From RPM?
Dec 18, 2010I accidentally did:
$ strace -o /usr/libexec/dovecot/dovecot-lda -d user
Of course this truncated the dovecot-lda file I was trying to trace down to a size of zero.
Is there a standard way to get this back from the RPM ?
That package has some configuration files I don't want copied over with the original RPM versions.
I am hoping for some nice option to rpm that will retrieve lost files like that and get the permissions and ownerships set right as opposed to brute force rpm2cpio and then manually copy the file into place and then try to figure out correct ownership and perms.
Programming :: Retrieving Value From Variable
Feb 5, 2010how shall I print each variable separately using a generalized form. I tried writing the following within a for loop...Code:echo $(echo a$(echo $i)$(echo $j))which did yield no result. So what shall I write??
View 3 Replies View RelatedUbuntu Installation :: 10.04 - BusyBox Screen Before Login But No Menu.lst
Jul 9, 2010I'm recieving a BusyBox v1.13.3 screen after attaching my 2nd sata-harddrive. I bootup the pc, but can't get to the login screen because of this message: Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
-Check root= (did the system wait for the righ device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/bf2ed1f9.... does not exist. Dropping to a shell!
[code]....
It seems one thing to do is to edit my /boot/Grub/menu.lst but I don't have that file! Even with the command: gksu gedit /boot/grub/menu.lst it just opens up an empty box. Note, the 2nd hdd (sdb) has to be removed to properly boot into Ubuntu to browse my files.
Starting a live-cd (9.10) and mounting the /root partition from sda method doesn't work either because the partiton is not mountable in Palimpset due to it not having a any readable data on it! ps. going to try and get into the Grub Loader during bootup and see if I can add "all_generic_ide" to the end of the assigned /root line. Will get back in a bit.Grub screen doesn't even appear if I attach the 2nd harddrive so can't get into that.
Ubuntu :: Install Does Not Get Past Retrieving Apt-mirror-setup
Dec 12, 2010I am trying to install ubuntu studio 10.10 it starts to go through the setup steps but after it scans the cd I get the message "Retrieving apt-mirror-setup" and it stays ay 0%.
I have tried both with internet and without and I get the same problem. It is a brand new disc with no os ever installed on it. Is the a way to force the installer to skip the mirror check?
General :: Retrieving Data From Old Windows XP Hdd?
May 6, 2011I use Ubuntu 11.04 Natty Narwhal and my wife who is not an Ubuntu convert still uses Microsoft Windows. Recently her ageing PC stopped functioning and she bought a more powerful PC with Windows 7 as the OS. Unfortunately, most of her specialised work software refuses to run on Windows 7, but she still wants / requires access to retrieve information from the old drive which was running (past tense) Windows XP Professional up until recently. Because of her fear of breaking the warranty on her new shiny PC, she won't let me remove the casing and fit the old drive. So, the question is, if I fit her old drive into my Ubuntu machine would it harm either my PC or her hdd? Also, these new SATA drives have no jumper settings (slave/master etc). How do I set it up and how do I get the information from this hdd?
View 2 Replies View RelatedGeneral :: Retrieving Partitions At Bootup
May 5, 2011I have Ubuntu 10.10 installed but when booting up the partitions are not visible on the boot loader. I have tried grub-install and update-grub off a live CD but to no avail, fdisk show the partitions still exist.
View 1 Replies View RelatedSoftware :: How To Get Busybox To Handle Aliases
Dec 14, 2010On a small Linux appliance using Busybox to provide the usual suspects, I'd like to create an alias "ll" that would translate to "ls -al" like I'm used to. Apparently, "alias" is not part of Busybox:
Code:
> echo $SHELL
/bin/sh
> ls -al /sbin/sh*
lrwxrwxrwx 1 1000 1000
7 Jan 1 2007 /sbin/sh -> busybox
> alias ll='ls -al'
alias: not found
Slackware :: Replace Fdisk With Gnu In Busybox?
Oct 23, 2009I want to replace the fdisk that is included on the busy box of the Slackware dvd, with the gnu fdisk. Trying to find something but not any luck till now.
Can it be done?
Ubuntu :: Gave Up Waiting For Root Device And Drops To BusyBox
May 4, 2010recently attempted to upgrade to Lucid Lynx but it's not booting up. it just shows "Gave up waiting for root device" and drops to BusyBox. waiting doesn't do anything. i see the GRUB options but none of the 3 10.04 LTS's boot up. i've read a number of threads but i don't think my Ubuntu drive is being read. i say this 'cause cat/proc/partitions doesn't list my Ubuntu drive/partition. Also when booting up in the Live CD, GParted only lists the Windows partition. neither does sudo fdisk -l.
View 9 Replies View RelatedUbuntu :: 10.04 Mount Is Denied NTFS Volume Is Already Opened Busybox?
Aug 22, 2010issue is with 10.04 installed via wubi on a xp pro ntfs drive.Have setup a new installation of 10.04 and been running it a few months.Update Manager came up and I said ok.Then after rebooting, this is what I get and I have found many SIMILAR but CONFUSING threads, so I don't know where to go from here and how to fix it.Grub flashes, and then this is what I get:Mount is denied because the NTFS volume is already exclusively opened.Use the fuser command.
Could not mount the partition /dev/sda1
run chkdsk /r
(filesystem = ntfs, error code = 16)
[code]....