Ubuntu Installation :: Any Option To Get All Sources Of Softwares In System
Dec 4, 2010
i am using 10.04 now and installed many softwares in it,i want to upgrade to 10.10,i dont have broadband so i cant upgrade via online.. going to use cd only,how to get all softwares which i already installed in 10.04.i think there is no option in cd for upgrade without new installation.. is there any option to get all sources of softwares in my system and to install it after installing 10.10.
Could not download all repository indexes. The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.
I've got the following problem: I just noticed that there were just very few notifications about updating the system (usually there are damn many of them in a week) So I opened the update manager and clicked on "refresh list". The following result popped up: p,li{white-space:pre-wrap;}E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found First I thought, it would be just some kind of server problem, but it didn't stop. The next thing was to research the thread and I even found something. However, the solution suggested didn't work at all. (Things, which might have caused this: I installed the default software center |I'm using Kubuntu, but in this case that fact doesn't matter| and used it. To sum up:
- not able to update the system referring to the launchpad main sources for 11.04 - following error: E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found It would be great if this was a common issue and I've been simply too stupid to find a proper solution. So you could just post the link.
I am running Jolicloud on my netbook (which I believe is an Ubuntu derivative) and I am tried to enter the getdeb.net sources in so I can install apps from the website through APT but
1) When I entered the sources into sources.list and then the key into Terminal and then went to the site and tried to install an app it didn't work.
2) I deleted the line of code in the sources.list file and when I opened terminal and entered "sudo apt-get update" it showed the list of sources, but on the list were Getdeb.net sources.
My question is how do I delete sources that aren't in /etc/apt/sources.list ?
When I try to enable any options in the Debian software, Software Sources immediately crashes. I'd like to enable official supported software downloadable from the internet.
I would like to make a bootable Ubuntu system on a USB stick from a full install, so I can update the packages/kernel etc, and I would also like to have the ability to Install ubuntu from the USB stick onto other computers. What package allows you to run the installer that is found on the LiveCD?
Also, is it possible to have a Ubuntu installer that uses updated packages rather than the LiveCD so they are current when installed rather than the release packages to save on the download/updating time?
probably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
I'm using Ubuntu 9.04 jaunty.I want to install Ubuntu 9.10 from the cd but I dont want softwares that I installed to be lost.what should I do?(It's the matter of time,internet speed and internet traffic limits)
Ubuntu can actually read files from Windows.But can Ubuntu install files that are supposed to installed in Windows.Is there any app in Ubuntu that can enable installation of for-Windows-only softwares? I want to Intall Adobe After Effects in my computer.
i want to know that can we do partition in ubuntu 10.10 just like windows? The problem is, if we want to upgrade Ubuntu 10.10 to new version and we have installed lots of useful software than how can bring back the same softwares? Is there any kind of BACKUP AND RESTORE technique so that we can restore it once we have upgraded our Ubuntu.
my 10.10 installation is configured with my favourite settings. will an upgrade to 11.04 remove the softwares installed? i have also made some changes to grub file. will all these be reset after upgrade?
I am a new user of FEDORA, would like to know how I can install software such as Canon Camera Software, Microsoft Encarta etc provided on CDs and DVDs into Fedora.
So I wanted to install ubuntu on my pc along with Windows XP (I also had vista, but it did not survive motherboard replacing I burned the LiveCD and booted from it. I chose to try ubuntu. After few minutes of playing with it I started the installer from the icon. I tried the "install alongside with other operating system" option, but I how could know what it will do? There is almost no information in that window. I have two 750GB hdds. sda with big partition over whole space and sdb with two partitions (Vista, and 40GB for Windows XP), but the installer shows only a small strip with ubuntu sign with no readable information! My sda has only 8GB of space free, so would it resize the partition to be 8GB smaller and make new partition for Linux there? On sdb it does not show my two partitions from some reason, but just one big labeled Windows 7 loader, so what would it do there? Delete the WinXP partition? Not a clue because there is no information visible in that supersmall strip with ubuntu sign on it. Just that there are some partitions hidden.
Mouseclick or mouseover do nothing. OK so I changed to the "manually specify partitions" mode to be sure what it does...And now what? I decided to shrink my WinXP partition and let the installer use the empty space, but what a surprise? It does not know what to do with! "No root file system is defined". OK so I fired up firefox and surfed a bit to know what partitions are needed. I then made ext4 partition and swap partition (not a clue how big they should be though : But there is again that message about no root filesystem! OMG so then I somehow figured out I have to assign a mount point / to it, but why there isn't any tip or info that this must be done remains a mystery for me. OK so the installation finally started and I thought that it will be OK at last. But guess what happens! No GRUB boot menu appeared but there was a blank screen for a strangely long time and then the computer rebooted again and then Windows XP started right away! WTH? I guess installer failed to change MBR or something.
OK so I booted from LiveCD again and now what... There are some guides from 2006 to be googled, but when I typed grub into a console it said it is not installed! This is great.Now I crossed a point where no BFU would ever dare to go I said to myself :- When I used the command to install grub it told me it will uninstall grub-pc package. What is grub-pc? Typing grub-pc does not do anything. Is it even possible to install something when running from a LiveCD? The crazy story does not end here. I thought that I will install it again and risk the first option "install alongside with other operating systems", if it will have any more luck with GRUB. So I did that on sdb and it took crazy long time.
I was so afraid what it was doing, but it was probably shrinking my big Vista partition.Then it was installed and what a surprise - I booted right into Windows XP again You probably think I am a masochist if I keep trying so many options desperately, but I frequently help my friends with pcs so I am glad I can test all options and be prepared for anything Now I reinstalled the system again while I was writing this and I will try to figure out how to fix that damn GRUB so I could boot into Linux
I have a IBM T30 with 40 GB HDD and an Win XP system installed. I have just deleted the partion with Ubuntu 8.04, which was installed alongside Win XP as dual boot. I can see on the internet [URL]... that I should be offered the option: - Install alongside other operating system However I am only offered: - Erase and use entire disc - Specify partitions manually (advanced) What is wrong?
when I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
I am installing a hp officejet pro 8500 all in one printer to knoppix 6.0.1. install hangs saying i need to disable cd sources in etc/apt/source.list. How do i do this?
Here is the log for what I have already done: Downloaded ubuntu.iso for my 64bit Sony Vaio Burned DVD System showed 2 option Windows 7 and Ubuntu (to boot from DVD) Booted to live Ubuntu from DVD (using option 2)Installed Ubuntu along with my existing Windows 7 After installing Ubuntu, system is still showing 2 options viz. Windows 7 and Ubuntu. On taking option 2 (Ununtu)...it says Not able to find a media with live boot... I think it is pointing to my DVD drive. How can I get the option to boot to Ubuntu installed on my system?
I have recently just installed UBR 9.10 on my acer aspire one. ran into some issues connecting to the internet but have all been fixed now (hadn't disabled ivp6, kicking myself in the head for not figuring it out earlier)
anyway, as soon as that problem had been fixed (can access the internet now fine through firefox) another had arisen. i found that i couldnt download anything through the ubuntu software center, update the system through update manager, or even download anything through terminal.
In my netbook /etc/apt/sources.list contains the cdrom asdeb cdrom:[Ubuntu ....]/hardy main restrictedIf I keep the iso file in /ubuntu and then want it to be refreshed during #/etc/apt/apt-get updatehow must I motify /etc/apt/sources.list
<Resolved>I am trying Natty in Virtualbox in my Maverick host and I want to install a repository. Can someone remind me how to reinstall the, now missing, Software Sources back into "System Administration"?
I am new user of Ubuntu and I am using 10.10 version. I have problem with the Ubuntu Software Center whenever I download the software it gives the error (Require installation of untrusted packages. The action would require the installation of packages from not authenticated sources...) The written in Brackets is the error..
Appear sometimes ago a message: E: Opening /etc/apt/sources.list - ifstream::ifstream (13: Permission denied) I'm trying update my computers but I don't get.. Please.. All my docs, movies and pictures are in this PC... What Can I Do to fix?
how to unlock my sources.list file, so I can add code and upgrade Firefox 3.53 to 3.6?Ubuntu 9.10Forget it...I tried again, and it saved my source code...
1.) I made a few updates that I found a website my friend sent me: http://blog.thesilentnumber.me/2009/...nstalling.html
however, when I would go to enter the APT line in the other sources in the software sources windows then close and reload it I would get the following error message code...
Some index files failed to download, they have been ignored, or old ones used instead.
I also attached a screen shot of the error message window.
2.) I don't know if i should post another issue I had, but when i try to run GNUnet it says that Daemon is not running. I'm not sure what that is all about.
I am running Ubuntu Studio 9.10 on Microsoft Virtual PC. After using it a lot, I have decided to move to a real machine. The thing is, I don't have the time to reinstall ubuntu and all the programs and move my docs.So i wanted to copy/move the content of my virtual HDD to put it on a real one. But when I try copying th e OS, it says that i don't have permission to do that. What can I do?