Red Hat :: After Fresh Install And Reboot - Get A Black Screen - CENTOS 5.5

Jan 26, 2011

I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.

View 3 Replies


ADVERTISEMENT

CentOS 5 Server :: After Fresh Install And Reboot Getting Black Screen

Jan 26, 2011

I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.

View 16 Replies View Related

General :: CentOS 5 Black Screen When Make Reboot?

Oct 18, 2010

I'm writing from the IBM Thinkpad A30 with Linux CentOS! After installed CentOS I've see a message when the sistem start....and this message said: ACPI: Could not use ECDT. (think is a BIOS error....but this is what I've read with a Google search.....). After the first start I've make the update (suggested by the OS) and, after make the reboot....same problem. I see a black screen and the power light of the HD seems run....but don'a appear any sort of screen immages/text.

View 2 Replies View Related

Fedora Installation :: Black Screen After Fresh Install?

Dec 8, 2009

Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _

View 11 Replies View Related

OpenSUSE Install :: Fresh Install 11.4 Blocks At Splash Screen On Reboot

Jun 30, 2011

I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.

Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.

Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.

I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.

Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.

So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.

View 4 Replies View Related

Ubuntu Installation :: Fresh Install Boots But Screen Goes Black

May 11, 2010

I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?

View 3 Replies View Related

Ubuntu Installation :: Black Screen On IMac G3 After Fresh Install Of Xubuntu 9.10?

Nov 28, 2010

I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.

The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).

I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.

My question is : How to access any configuration file to change resolution as I believe is the problem?

Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.

View 1 Replies View Related

Fedora Installation :: Fresh Install Hangs On Boot / Black Screen Blinking Cursor

Aug 9, 2011

After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).

The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.

View 5 Replies View Related

Debian Installation :: KDE Install BLACK Screen On Reboot

Mar 8, 2010

I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?

View 7 Replies View Related

CentOS 5 Hardware :: Fresh Install Of Centos Doesnt Display On Whole Screen?

Jun 8, 2009

i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.

View 5 Replies View Related

CentOS 5 :: Blank Screen After Fresh Install / Why System Hanging Before GRUB Menu?

Mar 28, 2011

I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.

Does anyone know why this system is hanging before the GRUB menu?

View 4 Replies View Related

CentOS 5 :: Black Screen After Install 5.4

Feb 6, 2010

I want to install a Centos Server. In the installation I choose the Gnome desktop, server, virtualization and server gui. I installed the os but when I reboot Centos doesn't appear :(, there is a black screen and it's not possible to write.

View 14 Replies View Related

Ubuntu Installation :: Fresh Installing 10.10 Hangs With Black Screen

Dec 19, 2010

I'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.

I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.

View 9 Replies View Related

CentOS 5 :: Blank Screen On Reboot After Install (not Intel DDC Issue)?

Oct 12, 2010

I've been trying to install 5.5 here for the past few days, first from USB and now from the CDs, with no success. The problem occurs when I reboot after installing. After the BIOS has done it's thing I'm faced with a blank screen with a blinking cursor at the top left of the screen.

Initially I assumed that this was due to the intel driver problem which is reported in the release notes as a known issue, and the PC I'm installing on has intel graphics. However I have now done a text install and still have the same issue. I'm able to boot up the system using the CentOS live CD, which encounters no issues, and it mounts the local system no problem. After unmounting and remounting to get write access I'm able to change the device entry in /etc/X11/xorg.conf to have the Option "DDC" "false" entry. I can also see that the runlevel is set to 3 in /etc/inittab, still I get the blank screen on attempting to boot.

Any ideas on what might be wrong here? It really sounds like the intel driver problem people have described, and yet I can't even boot in text mode so that doesn't seem to be the case here. Could there be something wrong with the bootloader?

View 2 Replies View Related

General :: Get Black Screen After Reboot?

Mar 6, 2011

I just installed Ubuntu and after the restart all I get is a black screen. Sounds like the program booted up but I can't see any thing.

Using a Gforce 9400 vid card.

View 1 Replies View Related

CentOS 5 Hardware :: X Server Black Screen During Install (core I5 GPU / Clarkdale)?

Mar 13, 2010

Finally i've got my new hardware! After assembling my System there was the first shock: I'm booting from DVD (CentOS 5.4 - 64bit) and everything's fine. When Anaconda attempts to start the X-Server, my Intel Clarkdale GPU is found and then there's a black Screen. Has anybody already tried this combination? Aunt Google wasn't very helpful :- /

My Hardware:
Intel Core i5 660 (integrated GPU)
ASUS P7H55-V
4 GB OCZ RAM
4 x 1TB SATA HDD
1 x 160GB IDE HDD

View 13 Replies View Related

Debian Installation :: Black Screen After Reboot

Jun 30, 2015

I have problem with my Debian. Sometimes after reboot I can see only mouse cursor (moveable) and black screen with command prompt in top -left corner. I don't know how to fix it...

Code: Select allroot@debian:/home/rafal# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.1 (jessie)
Release: 8.1
Codename: jessie

[code]....àwwwwwwwwwwwwwwwwwwww~s

View 9 Replies View Related

Fedora :: Update To F12 - Screen Black After Reboot

May 10, 2010

I just updated from FC 10 to FC 12 via install/upgrade disk, and when re-booted the screen is then black (at the point that it should display logins). I think it may be due to nvidia driver in FC 10 not being upgraded, because I think I compiled it from nvidia rather from yum install. Anybody else have this problem? BTW, it is a dual boot with Win XP, but has never caused a similar problem before.

View 8 Replies View Related

General :: Black Screen At Reboot After Installation

Jul 6, 2011

Dual boot installed Redhat enterprise linux 5 with windows 7 on a 64b machine. On reboot after loading some files the GUI doesnot show only a black screen and nothing happens.

View 3 Replies View Related

OpenSUSE Install :: Fresh Install + Update & Reboot = Unable To Open Session?

Sep 14, 2010

I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again

View 1 Replies View Related

Ubuntu :: Changed Keyboard Layout - Black Screen After Reboot

Oct 11, 2010

I have been using ubuntu 10.04 64 bits for about 3 month. Today I change my keyboard layout, so I want to test if everything is ok so I reboot my computer. When I try to reboot everything is as usual but the problem is that after grub. Nothing only a black screen no matter what i do. I doubt the keyboard layout change something but who knows. I run AMD phenom 940 X 4, 4 gig ram, Ati radeon HD 4870.

View 3 Replies View Related

Ubuntu Installation :: 11.04 Update Crashed - Black Screen On Reboot

May 3, 2011

I tried to update my main computer from Ubuntu 10.0 to 11.04. I wish I could remember what it said, but it crashed during the update. The lights on the keyboard were flashing on and off as well. When I try to boot, all I get is a black screen and flashing lights. The Ubuntu recover also has the same thing. I am going to try a fresh install. For some reason I am leaning to the power manager, but I am no where near sure.

View 2 Replies View Related

General :: Black Screen On Reboot In OpenSuSe Enterprise Desktop

Jan 13, 2011

So I updated my software using Yast. One of the updates failed to install. I rebooted and then was in black screen hell with the following information:

Neither the variables MOUSEDEVICE and MOUSETYPE nor the variable GPM_PARAM is set in /etc/sysconfig/mouse
Run 'yast mouse' to set up gpm
Starting hpssd: Checking/updating CPU microcode unused
Starting nfsboot (sm-notify) done
done
Loading keymap i386/qwert/uk.map.gz done
Loading compose table winkeys shiftctrl latin1.add done
Start Unicode mode done
Starting hotkey-setup done
[OK]
Starting cupsd done
Starting powersaved: ###################################
# ACPI system but acpid not running. #
# Start acpid first, then restart powersaved! #
############################################### skipped
Mount SMB/ CIFS File Systems unused
Executing suseRegister (looking for new update channels): skipped
Starting SSH daemon done
Starting ypbind.....................No domainname set skipped
Starting service automounter ("files nis" does not provide any mounts) skipped
Starting Firewall Initialization (phase 2 of 2) SuSEfirewallZ: Warning: ip6tables does not support state matching. Extended IPu6 support disabled.
SuSEfirewallz: Warning: no interface active done
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: nfs gpm microcode powersaved smbfs suseRegister ypbind autofs
Welcome to SUSE Linux Enterprise Desktop 10 SP1 (i586) - Kernel 2.6.16.54-0.2.5-default (tty1).
linux-bvuz login: Starting ZENworks Management Daemon^[^[^[

I don't have a CD drive attached to the HP 2133.

View 5 Replies View Related

Ubuntu Installation :: Fresh Install Of 10.10 Hangs After Reboot?

Mar 30, 2011

I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.

View 7 Replies View Related

General :: Using Black Panther Os V10 For The First Time On Fresh Install?

Mar 14, 2010

i normally use live cd's/dvd's. well i really liked black panther but, my problem is that it's in Hungary and that it did not give me any information on what the user and password is to log in for the first time.

View 2 Replies View Related

Software :: Virtualbox On Sid - VM - The Screen Goes Black Then Computer Completely Stops Responding - Needs Hard Reboot

Jan 13, 2010

So I'm in need of VM'ing a couple OS's to keep from repartitioning and dual booting my desktop. The first I'm trying to boot is a 64bit version of windows (have XP and 7 disc, trying XP for now) as I need to convert some of my work's ancient programs that still use DOS functions.

I choose Virtualbox over VMware just for the sake of VB being in the repos. Install and initial config went fine, but when I try to start (run) the VM the screen goes black, then the computer completely stops responding and needs a hard reboot. Pasting what I believe to be the error part in the log. If you need the entire log I can email or host it - too big for a post. Kernel Version - 2.6.32-trunk-amd64. Debian Sid

Short Version:

Code:

View 14 Replies View Related

Fedora Installation :: Black Screen On Boot After Fresh Installation Of F12

Nov 24, 2009

I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.

View 9 Replies View Related

Ubuntu Installation :: Black Screen After Fresh Installation Of Kubuntu 10.04

May 1, 2010

After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.

First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.

Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".

I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?

View 9 Replies View Related

CentOS 5 :: Kernel Panic Not Syncing No Init After Fresh Install Centos 5.3 Iscsi?

Jul 9, 2009

The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.

Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.

View 1 Replies View Related

CentOS 5 Hardware :: CentOS Won't Boot After Fresh Install [Proliant DL160 G6]?

Mar 23, 2010

I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved