Ubuntu Installation :: Black Screen After Fresh Installation Of Kubuntu 10.04
May 1, 2010
After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
View 9 Replies
ADVERTISEMENT
Nov 24, 2009
I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
View 9 Replies
View Related
May 11, 2010
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies
View Related
Dec 19, 2010
I'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.
I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.
View 9 Replies
View Related
Dec 8, 2009
Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _
View 11 Replies
View Related
Nov 28, 2010
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
View 1 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Mar 22, 2010
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
View 1 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jun 24, 2010
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
View 9 Replies
View Related
Jun 29, 2010
I have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
View 4 Replies
View Related
Oct 16, 2010
I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all
I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.
View 2 Replies
View Related
Apr 18, 2010
When I boot to Kubuntu 9.10, it asks me to login and I do, But then It just doesn't boot.
View 9 Replies
View Related
Jan 26, 2011
I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 3 Replies
View Related
Jul 13, 2010
I just installed Ubuntu on my home desktop computer this morning, and I am having fun exploring this new alternative to Microsoft. I originally tried to install Kubuntu, but after multiple unsuccessful attempts I gave Ubuntu a try and it worked like a charm.
Here's what I did: First, I burned the installation CD. Then I booted from that CD and began the installation process. When the Kubuntu desktop came up, and the icons started to appear, the screen suddenly went black. After that it flashed back and forth between the partially loaded desktop and the black screen.
That's as far as I got.
[Code]...
View 11 Replies
View Related
Apr 29, 2011
i just installed ubuntu 10.10 in my e-machine d730z, intel pentium processor P6, intel hd graphics, 2GB DDR3, 250 GB HDD. After installation im getting a black screen http://img684.imageshack.us/i/img05711m.jpg/.'m still new with ubuntu and by the way, after a minute, the screen goes black. i cant see the text.
View 1 Replies
View Related
Jan 26, 2011
I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 16 Replies
View Related
Oct 6, 2010
I've got a big(?) problem. I installed the Ubuntu 10.04 yesterday on my Acer Aspire One, it worked flawlessly thru the installation process and at the end it restarted (as normal I guess?). Anyway, when it started again the screen was completely black. Even if I try connecting a secondary screen I get the same result. In other words, after instalation I've never been able to use my computer...
Info: It was installed from a usb stick, because of the lack of a cd drive. I used the program "unetbootin" to tansfer/instal the .iso I dwonloaded from the ubuntu download site. I can see now that I maby downloaded the wrong version because it's called "ubuntu-10.04.1-desktop-i386". But I hope there is some way to fix it, or delete it and install the right version?
View 6 Replies
View Related
May 19, 2011
I installed 11.04 Desktop disk on my HP wx8000 workstation. When I rebooted, it gave me the black screen with a blinking caret.
- I have tried reinsalling grub2.
- I have tried adding "nomodeset" to the load command line
- I have tried setting grub to use only text mode.
View 6 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
May 1, 2010
My laptop: MSI AMD Athlon 64x2 Nvidia GeForce GO 6100.
I've done a fresh install of Ubuntu 10.04 and I end-up with a blank screen. I've also tried a fresh install of Xubuntu 10.04 and Kubuntu 10.04 and I get the same blank screen.
Ubuntu 9.10 was working perfectly though. So what do you think happened?
I installed the Ubuntu 10.04 livecd on my desktop and it works perfectly so I think it is not a burning problem.
View 5 Replies
View Related
Aug 1, 2010
I just did an install of 10.04 from a CD. Now the mouse pointer has to be slightly above a button to click on the button. Also, the bottom bar of the screen is just a thin line and you can't see any of the controls on it and the top bar is too thick, with empty space about the menu items. It is like the whole screen is pushed down slightly.
There is nothing wrong with the monitor or the mouse because it all worked fine with 7.10 ubuntu, which was on the computer before I did the fresh install from the CD.
View 2 Replies
View Related
Aug 1, 2010
I just setup a Fujitsu s6231 lifebook with Lucid. When I boot there is no grub menu unless i press the "start" key. Then the only way i can get into the machine is by entering into recovery mode and booting in "safe graphics mode".
Everything works fine once I am able to log on the "safe graphic mode".
If i don't press the "start" key the ubuntu logo will flash for 3 seconds and then the screen goes blank and nothing happens.
View 3 Replies
View Related
Jan 9, 2010
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
View 1 Replies
View Related
Mar 12, 2010
I was able to boot up the live CD and install the OS to the hard disk. *Single boot.After I rebooted, the system loads up to the Ubuntu splash screen and will "eventually" move along. The problem is that once it moves past the splash screen, it starts blacking out the screen. It looks like the screen turns on for about 10 seconds and then off for another 10 seconds repeatedly. The screen blinks like this indefinitely.This is my first attempt at installing and or using Linux so I am an uber n00b.
** Also, I am able to ctrl + alt + f1 and get to the terminal so i should be able to run any commands without any trouble.
View 1 Replies
View Related
Jul 8, 2010
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies
View Related
Feb 2, 2010
I installed kubuntu 10.4 with dual boot. Initially it worked fine but after 2 days it started hanging after the login screen.
View 5 Replies
View Related
Aug 14, 2010
However, I anyways went for reinstalling kubuntu 10.04. The installation went fine. It asked to reboot at the end, which I did. After the reboot, it gives me the login screen. After filling up the details there it again shows me the same login screen. This goes on forever.
View 5 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
