i have GF 6600..when i have install Karmic i was install driver NVIDIA for my GF6600 then finish n restart. but when my CPU booting to Ubuntu..Its Blank..the Driver its not work(Make my Ubuntu Error). Then i Install New Ubuntu Lucid..then i Install the Driver again(i think its will work)...But when i restart n Booting to Ubuntu...Same Error again, The Driver make Blank Screen??
View 5 RepliesYesterday evening I decided to get Photoshop CS5 working with WINE on my Ubuntu 11.04 install, which resulted in great success. Somehow in the process however, I managed to screw up my GLXDock - it wasn't rendering correctly. Despite numerous reboots along the way it still remained a mess, but I digress, that isn't the issue (just some background info if that helps!)
My motherboard has an integrated Intel graphics chipset. Now, since yesterday evening, I haven't been able to boot into Ubuntu using my nVidia 6600 - which I have been able to do for months previous now. Whether it was something I had changed, or an update that killed it I do not know. Booting normally, it will hang on the plain purple splash screen (not even getting to the "Ubuntu" splash) Even when I boot into recovery mode, the system comes out with a "Bad EIP Value" and hangs but ONLY when I have my nVidia card installed. If I take the card out and boot with integrated Intel, it boots to the desktop by the normal means fine and boots to recovery.
Proprietary driver does not work under ubuntu 11.04.I found this in Xorg log:
Quote:
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
on my old fx 5200 nvidia card, I installed the 173 driver and now when I log in to Default Ubuntu desktop with 3d enabled, like my screen will flash on and off like the panel and my awn dock turns white and then returns to desktop and repeats. You can only see the wallpaper and thats it. Useless! My desktop is virtually useless because I can't even use it. Gonna have to reinstall Ubuntu for the 5th time!
View 5 Replies View Relatedi've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies View RelatedI cant run my compiz. After updating the nvidia driver (current) and rebooting, i got a menssage saying that X is not working properly.
Denis@denis-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
[Code]....
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
I've been having big problems getting 9.10 to work with a Geforce4 MX-4000 card. I know it is not a hardware problem because I've got a dual boot win xp/9.10 setup and the video card works very well under win xp. The monitor is a Samsung P2250. The issue is that the highest resolution available after installing the recommended nvidia 96 driver is 800x600, the same as that before the driver was installed. This is very frustrating because the monitor requires 1920x1080 I'm not sure whether the driver is at fault or the xorg.conf settings.
Should I try installing the nvidia site drivers? I've checked out several forum threads on xorg.conf settings but I'm really not sure how to go on this. What I need is an entry level guide to setting up xorg.conf. The manual here is not that user friendly.
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies View RelatedI made the mistake of trying to install an nvidia graphics driver from the download.nvidia.com/opensuse11.2 repository. My card is a PCI quadro nvs 295 so looks like it should be supported. The installation and update of the kernel seemed to be successful, but for some reason sax2 doesn't seem to recognise the nvidia card, even when I run "sax2 -r -m 0=nvidia" and I'm stuck with the VESA framebuffer graphics default in /etc/X11/xorg.conf code...
I've found tons of threads on this kind of thing but I only seem to be making things worse trying to fix it. If anyone can give me a hint and fix my pathetic-looking desktop I'd be very grateful!!! At the moment nothing that uses opengl will work either
I'm trying Fedora for the first time. I tried installing NVidia's driver with their shellscript but it didn't work for lots of reasons. Has anyone done this before?:[URL].. Does it work? I never used a distro with a package manager before. Aren't there several different drivers for different NVidia cards? How do the instructions in that link make you get the correct driver? And then does it create an /etc/X11/xorg.conf file?
EDIT: or is the Neaveau driver good enough already? I can't figure out if it's basically a finished product or not.
While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
I've had so many problems with Ubuntu. it runs fine version 8.10 64 bit, but I can't install nividia drivers to run both my monitors. and of course steam games don't work... So I thought I'd join the Ubuntu forums to ask questions on has to fix it... NOT EASY. I tried to join there forum, but I could not even find a page to make an account? dose anyone know how? They expected me to all ready have one... and after an hour looking at the Ubuntu web site I could not find anywhere to make an account and join there forum. So here I am, hoping someone here can help.I just want to install the Nvidia driver for both monitors work and I might be able to install a 3rd party softare to let me play steam games. but Ubuntu keeps asking for some codes... I'm not sure what they are and when I try and update Ubuntu, if askes me for a password. I never set any passwords as I'm still learning the OS, so I tried "Root" and "Guest" both in lower and upercase, and both don't work. What is the bloody password, I never set one, so why is it doing this to me? I can't update Ubuntu. And it keeps asking me for some bloody code to install the Nvidia drive I downloaded? why? what is this code and where do I get it? And then other searches I've done tell me to get a "command line" and enter a command that deletes and/or fixes the problem... problem is that I have no idea how to find this command line in Ubuntu and know one what's to tell me, like it's a bit secerate, and I can't even join there forum to ask.
I'm a windows expert and work in IT with windows, but I thought it's time I learn more about other OS's, but Ubuntu is makeing it very hard as I can't even join there forum or install a Nvidia driver to run both my monitors, I'm just about to give up on Ubuntu as the surport form I can not access and there is no info on there web site on how to install and run dual monitors, and I can't sign up for there forums anywhere.
I have been bashing my head against the keyboard for over 6 hours now i just got a brand new asus ul30v it uses Nvidia geforce G 210M.
I went straight to installing ubuntu 10.10 on the whole disc. when the installation was complete i was happy and logged in. only seconds after i logged in i was promted that i was recomended to install a driver for my graphic card, for 3d and such. so i followed the installation and was asked to reboot. so i did. but then ubuntu booted straight into fullscreen terminal.
While being in this terminal i have tried to purge and reinstall GDM amongst endless other things, including rebooting several times.
Not being able to do anything about it, i reinstalled, and repeated the installation of the driver. same story over again.
Bottom line is i have rebooted close to 30 times, and reinstalled over 5 times. ive tried installing from the terminal (excactly the same story). tried to download it from their homepage, then install it (couldn't install it because i had to turn off driver X and "terminate all OpenGL applications", wich i dont know how to do. tried googling it, but ended up worse than before..[url]
Im guessing i cant install the driver at all with ubuntu 10.10? i havent tried it with older ubuntu versions because, of course, i wanted the newest version.
I have barely been using ubuntu before, although i've had it dualbooted.
I have found alot of posts with people getting stuck in terminal on boot, but none of the solutions that worked for them worked for me, probably because they had different problems than me.
A few days ago I installed 10.04 Lucid beta-2 and it came up OK. I then chose the recommended Nvidia driver "version current", which caused my system to come up in low graphics mode. I removed the driver and the system came up with no X11. I gave up.Yesterday I installed again, hoping that newer updates would fix the problem. The boot is now OK with no proprietary driver activated and all updates installed as of now (April 14, 05:30 GMT).
The Hardware Drivers dialog shows two choices: Nvidia version 173 and "version current (recommended)". Both of these show the status "this driver is activated but not currently in use". The only option offered is the button "remove".
I just upgraded to 11.04 a couple days ago, and it didn't go smoothly because I ran out of space, so I had to pause it and grow a partition.
When I got done there were several problems. One of them is that my nvidia proprietary driver is no longer being used. I found it in "additional drivers" and activated it, but it says "no proprietary drivers are in use on this system. This driver is activated but not currently in use."
I can run the nvidia control panel just fine, and write an xorg.conf file, but after I reboot the above message stays the same.
My xorg.conf file says to use the nvidia driver. My Xorg.0.log shows the nvidia board coming up what seems to be normally.
The "appearance" control panel doesn't even have the special effects tab anymore.
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
I installed the Nvidia driver. When I click on the "Monitors" package it then asks if I want to use my graphics drivers vendor's tool. I say yes and then it pops up the Nvidia X Server Settings dialog. In that menu it indicates I need to run nvidia-xconfig from root. I did this and then restarted the xserver but to no avail I get the same message every time I try to run "Monitors", that I need to run nvidia-xconfig.
View 9 Replies View RelatedI wish to update my nvidia driver (I was running 195.36.24 and I want to update to 195.36.31). I followed all the instructions on this thread (http://ubuntuforums.org/showthread.php?t=1467074) and everything went well until this part:
Code:
sudo sh blahblah.run
The error I get in the terminal reads: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL]...I have no idea how to exit X as it's not in my system processes.I have updated my nvidia driver in the past but have never encountered this problem. I'm running Ubuntu 10.04 on a Dell XPS M1530 if that matters.
I would like to know if anyone has installed the latest NVIDIA driver on Ubuntu 10.04 (64-bit) which is 256.35 (x86_64).
I am currently having some problem (unstable) with the previous release 195.36.31 (x86_64) and am now considering updating; but, am still reluctant because of possible problems during the installation process.
I've got an eight-year old PC that I'd like to breath some new life into. I was using it for my old scanner (HP, no longer supported by MS or HP), but when my Windows installation finally died I thought it was a perfect time to try Ubuntu. (Xsane running under Ubuntu does support that scanner.) I can get Ubuntu started on it, but when I try to activate/install the recommended Nvidia OEM driver, the system gets sick. Ordinarily I'd not worry about it, but the system only starts into low graphics mode, which leaves some dialogs too large for the display and partially unusable or worse. The PC is a cheap homebrew, using an A7N266-VM ASUS mb. It has some kind of Nvidia chipset on board, but no graphics accelerator.
View 2 Replies View Relatedafter a brand new 10.0.4-installation on my x86, the system proposes me to activate the nvidia-drivers for my gc - trying this, I get the following bug report:SystemError: Failed to lock /var/cache/apt/archives/lockWhat to do now?
View 3 Replies View RelatedI have a PC with Windows XP installed and want to try out how Ubuntu (or Linux Mint) performs when using the nVidia driver.
Unfortunately, after installing the video driver, the live CD, asks me to reboot, so losing all my changes. Is there a way of using the nVidia driver with a live CD?
I recently downloaded and installed Ubuntu 10.10. I thought it was awesome...still do. OK, the problem is i was prompted to install some proprietary drivers and so i did but thats when the problems started. After reboot i couldn't get the GUI or gdm (not sure what to refer it to) to work. It goes directly to a terminal screen every time so i actually reinstalled Ubuntu and tried installing the drivers all different ways but no luck. i also can get into recovery mode and do low graphics. the driver version im trying to get working is nvidia 260.19.12. my graphics card is a geforce 7 series cant remember the number i have a 32bit processor.
View 9 Replies View RelatedI am trying to install ubuntu 10.10 on my new computer: an Asus U33Jc. It is a 64bit machine. Everything seems Ok until I try to install the nvidia drivers. First, I tried to install it through the graphical interface as it popped up shortly after the install. Then, I tried to install the most up to date driver (290.19.36) found on nvidia's website. In both cases I get the same problem.
When I boot the computer it freezes at startup typically at the stage: "Checking battery state..." but not only (sometines before or after). In any case I never get to a graphical interface. I looked at many forums on the web (here here here and here for instance). But no solution work so far. Apparently there is a conflict with nouveau so I have blacklisted it. It seems the computer does not send the information on the good output, so I tried to twick my xorg.conf in different ways without any result.
I have install Ubuntu 10.10 64bit in my sony vaio vpccw16fs which have Nvidia graphics card (GT 230M). I have install it using nomodeset and after entering the system I installed nvidia from System> Administration> Additional drivers. Driver version was current 260.19.06. After installation I was able to see the boot screen but was unable to see the logon screen. The computer froze with the background color of bootscreen which is purple. And I have to restart it and have to choose failsafe graphic mode. And after logging in in failsafe graphic mode. My NVidia driver says I am not using it. How to use nvidia driver properly. I have tried many Tutorials present on internet but none of them works.
Here is my xorg.conf file.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is
Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]
Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.
I was running 10.10 with an Nvidia Quadro FX1500 and was able to get the effects (Compiz) working after following the manual driver install (found here) and editing my xorg.conf file. After this upgrade, Xserver (my desktop) wouldn't even launch. It just kept going into a terminal for log in. Not bad - better than not being to do anything at all. I removed all my nvidia drivers
Code:
sudo apt-get remove --purge nvidia-*
and then created a new xorg.conf file (and later moved to /etc/X11) using
Code:
Xorg -configure
That now allows me to log in to my desktop. However - no Unity. I've read that some people have had luck with the Nvidia 173 drivers, but not here. When I downloaded the current nvidia driver for my card (Quadro FX 1500) from nvidia, and went to install it manually using (from the directory where the download is)
Code:
sudo sh NVIDIA-Linux-x86-270.41.06.run
Eventually, it errors out with this: The compiler used to compile the kernel (gcc4.4) does not exactly match the current compiler (gcc4.5). For the record, I can't boot from a thumb drive ("boot error") or CD (both were created and tested on a Windows 7 machine.)
I'm a newbie to Linux and I'm using offline ubuntu 9.04 and now I have problem installing Nvidia driver which I don't have access to internet to download driver. Can you show the way to download Nvidia driver? I downloaded from Nvidia Site but I still need internet access to install it.
View 2 Replies View Related