Ever since I upgraded my video driver (the proprietary NVIDIA drivers) to 270.18, I have been experiencing lag when typing and when using Compiz as my WM. I can work around both problems by switching the WM to Metacity, but obviously I don't want to continue using that. I have tried changing my Compiz settings but to little avail. If you want my OS and graphics card, the OS is Ubuntu 10.10 and the graphics card is a NVIDIA GT 330M.
I have a geforce 8400GS and nvidia-current installed. However, the Additional Drivers app advises that "No proprietary drivers are in use on this system" and that the driver is activated but not in use. I know other people have complained about this problem, but for me this is breaking 3D content and I can't get compiz to work either. When I try to start compiz manually (compiz --replace), I get this error:
Code: compiz (code) - Fatal: Couldn't open display My Xorg has nvidia as device driver. I'm using the NVIDIA X Server settings program to setup my two monitors, so I know that this is what is in use. In addition to the compiz problem (which I can get over), sometimes I can see the desktop background through the active window. It's hard to explain so I'll take a screenshot when it happens again. Things I've tried:
1. Installing nvidia's latest drivers - The installer was extremely picky, constantly complaining about other modules and drivers. After I finally managed to remove everything it didn't like and install it, X wouldn't load.
2. Reinstall nvidia-current - tried multiple times with no change.
3. Link /usr/lib/xorg/modules/extensions/libglx.so to /usr/lib/nvidia-current/xorg/libglx.so.270.41.06 - didn't make a difference.
I'm a Karmic user, using a Nvidia Geforce 9500GT video Card.
I'm telling you about my GPU, because since I upgraded to the 190.42 Nvidia "official" new drivers, what's happening is:
My Compiz is no more able to save it's configuration across the sessions, and every time I close my PC or when I simply need to restart my active session, Compiz needs to be started again manually, It do not auto-activate by the compiz setting preferences. Doing: System --> Preferences --> gnome-appearance-properties (TAB: "Visual effects") and click on "normal" checkbox, to activate the compiz visual effects.
Is there anyone able to teach me how to save the compiz activation, in order to avoid the manual, boring, repetitive, activation each time?
I have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
A couple of issues with compiz. I'm setting up Debian Squeeze on a new-to-me laptop. Video card is nVidia Quadro FX 570M.
I installed the nVidia non-free driver, and that's working fine. Compiz starts up ok (I say "compiz --replace"). At least some of the effects are working, and the windows look normal.
First issue: as soon as I start Compiz, the number of workspaces goes from 4 to 2. And Workspace Switcher Preferences (the thing that pops up when you right-click the workspace switcher in the Gnome Panel) no longer shows the controls for changing the number of workspaces.
Is there is a way to change the no. of workspaces using gnome configuration editor? That might be a good workaround.
The second issue is, compizconfig-settings-manager will not run, whether Compiz is running or not. I don�t know if it would run before I installed the nVidia driver (Compiz wouldn't run so there was no reason to try CCSM). When I try to start it from the menu, I get the spinning cursor for several seconds, and that's all. When I say "ccsm" in a console...
Code:
I dont think the locale error is the problem. I get locale warnings all the time, like when I use apt-get, but it doesnt stop the program from running. But I could be wrong about that.
I have installed Debian Lenny and the Driver for an NvidiaCard GTX280. As this card is not supported by the debian-repositories, i have installed the driver from the nvida-Site. It works ok, but there's one thing: When i have compiz fusion activated, the caracters in the shell are sometimes hidden (pls see attachment).
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
on my old fx 5200 nvidia card, I installed the 173 driver and now when I log in to Default Ubuntu desktop with 3d enabled, like my screen will flash on and off like the panel and my awn dock turns white and then returns to desktop and repeats. You can only see the wallpaper and thats it. Useless! My desktop is virtually useless because I can't even use it. Gonna have to reinstall Ubuntu for the 5th time!
i have GF 6600..when i have install Karmic i was install driver NVIDIA for my GF6600 then finish n restart. but when my CPU booting to Ubuntu..Its Blank..the Driver its not work(Make my Ubuntu Error). Then i Install New Ubuntu Lucid..then i Install the Driver again(i think its will work)...But when i restart n Booting to Ubuntu...Same Error again, The Driver make Blank Screen??
I heard a lot about NVIDIA Xinerama & Compiz not working but on looking further, in recent times people have got them to work. I've setup Xinerama with 4 monitors working across 2 dual video cards and it works great. I have the latest NVIDIA drivers (using the one-click) and I just installed the latest compiz using one-click as well.
The cards are as follows: Chip: 0 is -> NVIDIA GeForce 8600 GT 01:00:0 0x10de 0x0402 AGP nvidia Chip: 1 is -> NVIDIA GeForce 8600 GT 02:00:0 0x10de 0x0402 AGP nvidia (I chose these because they have no fans and when working from home, quiet is nice to have!)
The following options are recommended to run compiz with NVIDIA and I have enabled them all at one point. However, looking through carefully I don't need to since using the latest drivers and having pretty good video cards all this seems to be (according to the documentation) automatically enabled.
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
Basically what has happened is that I have installed the nvidia drivers for a 9800 GT from the One-click install for the newer video cards. It seems to have succeeded although I am having difficult activating 3D effects. What happens is that whenever I activate Compiz settings, it works for about 2 seconds (wobbly windows is my test) and then quickly goes back to standard. Is this something I have done wrong or is my hardware incompatible? It works in other distributions I have tried so I'm assuming it is a fault on my part.
I've been having big problems getting 9.10 to work with a Geforce4 MX-4000 card. I know it is not a hardware problem because I've got a dual boot win xp/9.10 setup and the video card works very well under win xp. The monitor is a Samsung P2250. The issue is that the highest resolution available after installing the recommended nvidia 96 driver is 800x600, the same as that before the driver was installed. This is very frustrating because the monitor requires 1920x1080 I'm not sure whether the driver is at fault or the xorg.conf settings.
Should I try installing the nvidia site drivers? I've checked out several forum threads on xorg.conf settings but I'm really not sure how to go on this. What I need is an entry level guide to setting up xorg.conf. The manual here is not that user friendly.
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
I made the mistake of trying to install an nvidia graphics driver from the download.nvidia.com/opensuse11.2 repository. My card is a PCI quadro nvs 295 so looks like it should be supported. The installation and update of the kernel seemed to be successful, but for some reason sax2 doesn't seem to recognise the nvidia card, even when I run "sax2 -r -m 0=nvidia" and I'm stuck with the VESA framebuffer graphics default in /etc/X11/xorg.conf code...
I've found tons of threads on this kind of thing but I only seem to be making things worse trying to fix it. If anyone can give me a hint and fix my pathetic-looking desktop I'd be very grateful!!! At the moment nothing that uses opengl will work either
I'm trying Fedora for the first time. I tried installing NVidia's driver with their shellscript but it didn't work for lots of reasons. Has anyone done this before?:[URL].. Does it work? I never used a distro with a package manager before. Aren't there several different drivers for different NVidia cards? How do the instructions in that link make you get the correct driver? And then does it create an /etc/X11/xorg.conf file?
EDIT: or is the Neaveau driver good enough already? I can't figure out if it's basically a finished product or not.
While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
I've tried linux many times in the past, and I'm always irritated to the point of formatting it, shredding the disk, and cursing it while enjoying my windows. Anyhow, (for some reason beyond me) I'm trying it again. Let me start off with the fact that I am very very irritated with how difficult this is becoming (why the hell can't nvidia just make a driver I can install without all of this crap?). OK, so I know how to cd to a directory, login as root. Any time I try to install the nvidia driver, it tells me I need to close X. I've tried going into the recovery terminal and it tells me this. I've also tried the command "/etc/init.d/gdm stop" and then it just takes me to a black screen.I can't do anything from there but push ctrl+alt+delete to restart.So,if anyone can give me simple steps that would be great. I don't want to learn how to use the OS, I just want to install this driver so I can read text and more than half of my monitor is displayed on,I'm on linux hardy heron 8.04
I just installed Ubuntu 10.04 RC, and only basic graphics work.I have Nvidia GeForce 9600 GT. I cant enable desktop effects, nor can i watch video or anything else. Is there a way to install nvidia driver in RC? It looks and feels real nice i wish i can start using it right now.
I've got some problems while using the Nvidia driver for my videocard.
Some system information: Intel core i5 430M 4 GB DDR3 RAM Nvidia Geforce GT 325M 1 GB HDD 500 GB, 5400 rpm Ubuntu 10.10 64 bit (Windows 7 64 bit)
I installed the newest nvidia driver(260.19.21), using the guide on this site:
Installing NVIDIA 3D Drivers Linux article Link(not allowed to post URLs, so I cut it in pieces) [url]
And I tried many other methods(System, Administration, Additional Drivers), other driver versions and so on.
The installation succeeds, but when i'm trying to reboot it wont start gdm. It will boot in Text-only(CTRL+ ALT +F1), and it won't let me use gdm. Restarting gdm, startx, all of them won't work. The only way is to boot in recovery and restore the default xorg.conf file.
Nvidia card is working under windows, so it isn't broken.
I have tried doing some research on the correct method of installing drivers and getting compiz to work. I have recently switched from ubuntu to debian. The thing I loved about ubuntu, was what compiz could do. Where to Get the correct drivers or instructions and all set up so that I may use CCSM and have a sweet desktop cube again?
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
Did a clean install (with drive format) of Kubuntu 10.04 x64. Installed updates and rebooted a few times.Need to install NVidia driver for my GPU (200series). Have downloaded the latest driver to my documents folder, and set properties, but I do not know how to go any further. How do I install the driver? Direct any help to a total N00b to Kubuntu with little knowledge of other versions. (Q6600 system, 200GB drive, 4GB RAM).
