Ubuntu Installation :: 10.04 Can't Get NVidia Driver Running
May 2, 2010
I installed the Nvidia driver. When I click on the "Monitors" package it then asks if I want to use my graphics drivers vendor's tool. I say yes and then it pops up the Nvidia X Server Settings dialog. In that menu it indicates I need to run nvidia-xconfig from root. I did this and then restarted the xserver but to no avail I get the same message every time I try to run "Monitors", that I need to run nvidia-xconfig.
View 9 Replies
ADVERTISEMENT
Dec 15, 2009
I've been trying to figure out the cause of system hangs with slack 13 for a a week or so. I get random total freezes with the keyboard LED's blinking at me and the only solution is to do a hard-reset. I was using a self-compiled 2.6.31.6 kernel on 32bit Slack with similar results, but thought it had more to do with several bad starts as I got used to Slack's way of doing things... eventually I decided I'd made enough bad starts with that installation and after reading a bit about _current fixing some stability issues added another installation to my machine using Slackware64 and upgrading to _current. It worked great, then I installed the NVIDIA proprietary driver. The system hangs are back.
Sometimes they happen quickly, sometimes they take hours, sometimes while I'm working, sometimes when the machine has been idle for hours. For a couple of days I've been going back and forth between the NVIDIA propreitary and the nv driver. I've run memtest86 for 4.5 hours and not a single error, I'm running this on a new HD, I even upgraded the case fan (the old one was starting to complain!).
I've also installed different versions of the driver 185.x.x, 190.42.x. I've used slackbuilds, I've used "sh NVIDA.xxx.RUN" I've said "yes" to everything the installer asked, I've said "no".
So far no hangs with the nv driver. I've been leaving one or the other running at all times and no hangs with the nv driver, but within hours with the proprietary driver.
All that is to say I'm confident the issue is with the NVIDIA proprietary driver, OR something in my kernel options that only shows up when I'm using the NVIDIA driver.
Is anyone else running this successfully?
SLACKWARE64 kernel 2.6.32 (same behavior on 32bit with 2.6.31.6) compiled kernel with "make oldconfig" then "make localmodconfig" BEFORE the NVIDIA driver was installed. ext3 filesystem (same behavior with ext4 on previous installation)
View 14 Replies
View Related
Feb 17, 2011
After starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies
View Related
Oct 15, 2010
I have been bashing my head against the keyboard for over 6 hours now i just got a brand new asus ul30v it uses Nvidia geforce G 210M.
I went straight to installing ubuntu 10.10 on the whole disc. when the installation was complete i was happy and logged in. only seconds after i logged in i was promted that i was recomended to install a driver for my graphic card, for 3d and such. so i followed the installation and was asked to reboot. so i did. but then ubuntu booted straight into fullscreen terminal.
While being in this terminal i have tried to purge and reinstall GDM amongst endless other things, including rebooting several times.
Not being able to do anything about it, i reinstalled, and repeated the installation of the driver. same story over again.
Bottom line is i have rebooted close to 30 times, and reinstalled over 5 times. ive tried installing from the terminal (excactly the same story). tried to download it from their homepage, then install it (couldn't install it because i had to turn off driver X and "terminate all OpenGL applications", wich i dont know how to do. tried googling it, but ended up worse than before..[url]
Im guessing i cant install the driver at all with ubuntu 10.10? i havent tried it with older ubuntu versions because, of course, i wanted the newest version.
I have barely been using ubuntu before, although i've had it dualbooted.
I have found alot of posts with people getting stuck in terminal on boot, but none of the solutions that worked for them worked for me, probably because they had different problems than me.
View 3 Replies
View Related
Apr 14, 2010
A few days ago I installed 10.04 Lucid beta-2 and it came up OK. I then chose the recommended Nvidia driver "version current", which caused my system to come up in low graphics mode. I removed the driver and the system came up with no X11. I gave up.Yesterday I installed again, hoping that newer updates would fix the problem. The boot is now OK with no proprietary driver activated and all updates installed as of now (April 14, 05:30 GMT).
The Hardware Drivers dialog shows two choices: Nvidia version 173 and "version current (recommended)". Both of these show the status "this driver is activated but not currently in use". The only option offered is the button "remove".
View 4 Replies
View Related
Jul 4, 2011
I just upgraded to 11.04 a couple days ago, and it didn't go smoothly because I ran out of space, so I had to pause it and grow a partition.
When I got done there were several problems. One of them is that my nvidia proprietary driver is no longer being used. I found it in "additional drivers" and activated it, but it says "no proprietary drivers are in use on this system. This driver is activated but not currently in use."
I can run the nvidia control panel just fine, and write an xorg.conf file, but after I reboot the above message stays the same.
My xorg.conf file says to use the nvidia driver. My Xorg.0.log shows the nvidia board coming up what seems to be normally.
The "appearance" control panel doesn't even have the special effects tab anymore.
View 2 Replies
View Related
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
View Related
Jun 16, 2010
I wish to update my nvidia driver (I was running 195.36.24 and I want to update to 195.36.31). I followed all the instructions on this thread (http://ubuntuforums.org/showthread.php?t=1467074) and everything went well until this part:
Code:
sudo sh blahblah.run
The error I get in the terminal reads: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL]...I have no idea how to exit X as it's not in my system processes.I have updated my nvidia driver in the past but have never encountered this problem. I'm running Ubuntu 10.04 on a Dell XPS M1530 if that matters.
View 2 Replies
View Related
Apr 29, 2011
Proprietary driver does not work under ubuntu 11.04.I found this in Xorg log:
Quote:
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
View 2 Replies
View Related
Jul 21, 2010
I would like to know if anyone has installed the latest NVIDIA driver on Ubuntu 10.04 (64-bit) which is 256.35 (x86_64).
I am currently having some problem (unstable) with the previous release 195.36.31 (x86_64) and am now considering updating; but, am still reluctant because of possible problems during the installation process.
View 6 Replies
View Related
Feb 1, 2010
I've got an eight-year old PC that I'd like to breath some new life into. I was using it for my old scanner (HP, no longer supported by MS or HP), but when my Windows installation finally died I thought it was a perfect time to try Ubuntu. (Xsane running under Ubuntu does support that scanner.) I can get Ubuntu started on it, but when I try to activate/install the recommended Nvidia OEM driver, the system gets sick. Ordinarily I'd not worry about it, but the system only starts into low graphics mode, which leaves some dialogs too large for the display and partially unusable or worse. The PC is a cheap homebrew, using an A7N266-VM ASUS mb. It has some kind of Nvidia chipset on board, but no graphics accelerator.
View 2 Replies
View Related
May 23, 2010
i have GF 6600..when i have install Karmic i was install driver NVIDIA for my GF6600 then finish n restart. but when my CPU booting to Ubuntu..Its Blank..the Driver its not work(Make my Ubuntu Error). Then i Install New Ubuntu Lucid..then i Install the Driver again(i think its will work)...But when i restart n Booting to Ubuntu...Same Error again, The Driver make Blank Screen??
View 5 Replies
View Related
Jun 12, 2010
after a brand new 10.0.4-installation on my x86, the system proposes me to activate the nvidia-drivers for my gc - trying this, I get the following bug report:SystemError: Failed to lock /var/cache/apt/archives/lockWhat to do now?
View 3 Replies
View Related
Sep 2, 2010
I have a PC with Windows XP installed and want to try out how Ubuntu (or Linux Mint) performs when using the nVidia driver.
Unfortunately, after installing the video driver, the live CD, asks me to reboot, so losing all my changes. Is there a way of using the nVidia driver with a live CD?
View 3 Replies
View Related
Nov 1, 2010
I recently downloaded and installed Ubuntu 10.10. I thought it was awesome...still do. OK, the problem is i was prompted to install some proprietary drivers and so i did but thats when the problems started. After reboot i couldn't get the GUI or gdm (not sure what to refer it to) to work. It goes directly to a terminal screen every time so i actually reinstalled Ubuntu and tried installing the drivers all different ways but no luck. i also can get into recovery mode and do low graphics. the driver version im trying to get working is nvidia 260.19.12. my graphics card is a geforce 7 series cant remember the number i have a 32bit processor.
View 9 Replies
View Related
Feb 16, 2011
I am trying to install ubuntu 10.10 on my new computer: an Asus U33Jc. It is a 64bit machine. Everything seems Ok until I try to install the nvidia drivers. First, I tried to install it through the graphical interface as it popped up shortly after the install. Then, I tried to install the most up to date driver (290.19.36) found on nvidia's website. In both cases I get the same problem.
When I boot the computer it freezes at startup typically at the stage: "Checking battery state..." but not only (sometines before or after). In any case I never get to a graphical interface. I looked at many forums on the web (here here here and here for instance). But no solution work so far. Apparently there is a conflict with nouveau so I have blacklisted it. It seems the computer does not send the information on the good output, so I tried to twick my xorg.conf in different ways without any result.
View 2 Replies
View Related
Apr 3, 2011
I have install Ubuntu 10.10 64bit in my sony vaio vpccw16fs which have Nvidia graphics card (GT 230M). I have install it using nomodeset and after entering the system I installed nvidia from System> Administration> Additional drivers. Driver version was current 260.19.06. After installation I was able to see the boot screen but was unable to see the logon screen. The computer froze with the background color of bootscreen which is purple. And I have to restart it and have to choose failsafe graphic mode. And after logging in in failsafe graphic mode. My NVidia driver says I am not using it. How to use nvidia driver properly. I have tried many Tutorials present on internet but none of them works.
Here is my xorg.conf file.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 5 Replies
View Related
May 1, 2011
After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is
Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]
Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.
View 5 Replies
View Related
May 5, 2011
I was running 10.10 with an Nvidia Quadro FX1500 and was able to get the effects (Compiz) working after following the manual driver install (found here) and editing my xorg.conf file. After this upgrade, Xserver (my desktop) wouldn't even launch. It just kept going into a terminal for log in. Not bad - better than not being to do anything at all. I removed all my nvidia drivers
Code:
sudo apt-get remove --purge nvidia-*
and then created a new xorg.conf file (and later moved to /etc/X11) using
Code:
Xorg -configure
That now allows me to log in to my desktop. However - no Unity. I've read that some people have had luck with the Nvidia 173 drivers, but not here. When I downloaded the current nvidia driver for my card (Quadro FX 1500) from nvidia, and went to install it manually using (from the directory where the download is)
Code:
sudo sh NVIDIA-Linux-x86-270.41.06.run
Eventually, it errors out with this: The compiler used to compile the kernel (gcc4.4) does not exactly match the current compiler (gcc4.5). For the record, I can't boot from a thumb drive ("boot error") or CD (both were created and tested on a Windows 7 machine.)
View 7 Replies
View Related
Oct 25, 2009
I'm a newbie to Linux and I'm using offline ubuntu 9.04 and now I have problem installing Nvidia driver which I don't have access to internet to download driver. Can you show the way to download Nvidia driver? I downloaded from Nvidia Site but I still need internet access to install it.
View 2 Replies
View Related
Jan 15, 2010
Long ago (Back in the Intrepid Ibex days) I ran a manual upgrade of NVIDIA drivers from NVIDIA's website, in an attempt to get Wine running better on my system. Now every time I run upgrade manager, this message (or something similar) pops up twice every time I run upgrade manager:Code:The system has detected an obsolete NVIDIA driver in your system.Please install nvidia-glx-185 at the end of the installation with the following command:sudo apt-get install nvidia-glx-185The removal of other NVIDIA drivers will be dealt with automatically.I actually have nvidia's 190 drivers installed, so the error message is a bit of a misnomer.This message has been persistent with every upgrade, and appeared many times during the Karmic upgrade.
Now I understand when I did this originally every time I get a kernel upgrade and rebooted I'd need to reinstall NVIDIA's drivers. But ever since my Karmic upgrade, things seem to be a bigger hassle than normal.. The system almost locks up after reboot. Compiz now seems crippled and I've disabled it just to get a decent framerate.What I'd really like to do is go back to Karmic's NVIDIA drivers and not have to deal with update problems anymore.However, when I attempt to reinstall Karmic's NVIDIA drivers, I just can't seem to make this error message go away or get the drivers to work. I end up frustrated an hour later, reinstalling NVIDIA's drivers because something is broken and I just can't get jaunty's drivers working at all.
View 3 Replies
View Related
Mar 22, 2010
I'm having problems with my Nvidia card. X doesn't work after installation (9.10), only command prompt. I've read the instructions at http://www.psychocats.net/ubuntu/nvidia on how to enable Nvidia drivers, but the instructions are only for GUI, which I don't have.
Anyone knows how to enable Nvidia drivers from command line ?
View 2 Replies
View Related
May 5, 2010
I've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for
[Code]....
View 9 Replies
View Related
May 7, 2010
I want to use my video card, but after upgrade i got this message:
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
will be apreciaTED, after running from terminal I got this
CODE:
rey@rey-desktop:~$ sudo nvidia-xconfig
[sudo] password for rey:
Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
View 1 Replies
View Related
May 13, 2010
Upgraded to 10.04 with proprietary Nvidia driver. No plymouth at boot, but dmesg gives error below. On shutdown get large plymouth display. Tried several hints but none work.
2.985912] 1179648 pages RAM
[ 2.985914] 951810 pages HighMem
[ 2.985915] 149486 pages reserved
[ 2.985916] 642 pages shared
[ 2.985917] 208097 pages non-shared
[Code]...
View 2 Replies
View Related
May 29, 2010
I've just installed 10.04 on my Dell Latitude D830 with a NVIDIA Quadro NVS 140M; upon booting Ubuntu asked me to install the official NVIDIA driver (latest) so I went ahead and installed it, now the boot splash screen is in about 640x480/800x600 rather than the usual 1920x1200 it was when I first booted.
View 4 Replies
View Related
Jun 25, 2010
This happened after ubuntu pushed an nvidia graphics update about a week ago, on upgrade I booted up into this:Obviously I had to take this picture with a camera, since a screenshot only showed one screen. It's perfectly usable like this, except that it's too small to read.I of course have tried 'sudo nvidia-xconfig', and a minimal xorg.conf:
Code:
Section "Device"
Identifier "Default Device"
Driver "nvidia"
EndSection
Along with purging and reinstalling all of the nvidia packages numerous times. I'm currently running on the VESA driver, which sucks. My chipset is a 9200M, but like I said, it worked perfectly before the last upgrade. In all my years of using linux and kubuntu, I've seen and fixed numerous nvidia driver errors, but I've never seen one this strange, usually it will run or not run.
View 5 Replies
View Related
Jun 30, 2010
Had mythbuntu/xbmc running for 4 months with vdpau and all the same hardware. I killed it with an update and thought it'd all be easier To build it the 2nd time -- wrong! Fresh install of mythbuntu lucid off cd, Asus p5g43t-m pro, nvidia gforce 9500 gt
What I tried so far...Different drivers with the hardware app thingee. Multiple times -- Purge nvidia, purge nouveau, blacklist list of other video stuff with extra line after, stop gnome, manual install various drivers - 195.xxxxx or Synaptic install various drivers. Tried updates, adding avenard and daily build repos. Everything in combinations. Outcome remains consistant. Lo res error start, can't load nvidia driver, selected but not in use, xorg.conf needs editing.
I'm getting the same error messages as the common nvidia help posts describe but the solutions aren't working for me.
4 days of this, 3 installs plus a shot at Mint, and no progress. I'm pretty frustrated. I'd consider returning to karmic if I didn't think the updates would pork the nvidia driver all over again.
Last install of 9.10 there was a required edit of vmalloc=256M and a shut off of cx18. That's been fixed in lucid? What else ccould it be?
View 3 Replies
View Related
Jul 6, 2010
last night i have fresh installed ubuntu 10.4 on my computer. Then after that, I installed the updates. Lastly, i installed nvidia hardware driver so that i could use its graphical effects. After rebooting my computer, i've noticed that i was disconnected from the internet. And I was surprised that it is the cause of my internet disconnection because when i remove it, my internet comes back. What should I do with this?
View 7 Replies
View Related
Jul 18, 2010
I've been trying to install the latest driver NVIDIA-Linux-x86_64-256.35.run. I do ctrl+alt+f1 and login, then sudo sh ./NVIDIA-Linux-x86_64-256.35.run and it gives me the license agreement, but after I accept and right after it gets to 100% it says it can't install the kernel or access or whatever. Has anyone done this installation and had the same problem but figured it out??
View 4 Replies
View Related
