OpenSUSE Hardware :: Can't Get Nvidia Graphics Driver To Work / Resolve This?
Apr 13, 2010
I made the mistake of trying to install an nvidia graphics driver from the download.nvidia.com/opensuse11.2 repository. My card is a PCI quadro nvs 295 so looks like it should be supported. The installation and update of the kernel seemed to be successful, but for some reason sax2 doesn't seem to recognise the nvidia card, even when I run "sax2 -r -m 0=nvidia" and I'm stuck with the VESA framebuffer graphics default in /etc/X11/xorg.conf code...
I've found tons of threads on this kind of thing but I only seem to be making things worse trying to fix it. If anyone can give me a hint and fix my pathetic-looking desktop I'd be very grateful!!! At the moment nothing that uses opengl will work either
View 9 Replies
ADVERTISEMENT
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Apr 8, 2010
I have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
View 14 Replies
View Related
Jun 20, 2010
I have a nvidia Geforce 8500 on my 10.04 system - the driver I'm using is: NVIDIA accelerated graphics driver (version current) [Recommended]. When I look at System/Preferences/Monitors I am asked if I want to use the vendor's graphics tool and up pops the NVIDIA X Server Settings window. How do I enable 3D acceleration?
View 2 Replies
View Related
Apr 12, 2011
I have just had to install CentOS 5.6 on a family members computer, as they lost there Windows XP key. Anyway, I am needing to install a new nvidia graphics driver. I found a howto on this forum for 5.2 [URL]
View 5 Replies
View Related
Jun 6, 2010
After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
View 2 Replies
View Related
Oct 3, 2010
I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
View 2 Replies
View Related
Jul 9, 2011
Infact I've seen the linux(ubuntu 11.04) for the first time today. I don't know anything about linux & i'm not able to install my nVidia 8600gt graphics driver. I've downloaded the .run file from here
[URL]
when I'm opening the .run file it's showing an error
"Could not open the file /home/f1/Downloads/NVIDIA-Linux-x86-275.09.07.run.
gedit has not been able to detect the character encoding. Please check that you are not trying to open a binary file. Select a character encoding from the menu and try again."
After trying for all day long I found this HOWTO
[URL]
View 2 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
May 8, 2009
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
View 3 Replies
View Related
Mar 21, 2011
I'm running Ubuntu as a guest virtual machine (via VirtualBox) on a Windows 7 machine and have a LOT of problems with getting the graphics to work properly... I've tried for a couple of days now without success. I don't know if the problem is with VirtualBox or Ubuntu, but I'll try to post it here if anyone has any suggestions.
View 3 Replies
View Related
Apr 15, 2010
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies
View Related
Nov 6, 2010
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
View 1 Replies
View Related
Mar 10, 2010
I am a new Ubuntu user and am having trouble getting the audio to work through the hdmi out to my tv using an Nvidia Ion graphics/sound card.
As far as I can make out Ubuntu recognises the sound card l but i cant get any sound out of it and don't know to go about altering anything.
View 3 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
Jun 28, 2009
I am a Ubuntu and LINUX newbie. Install goes easy but I can not get 3D accelerated graphics to work. So I am stuck with poor and slow graphics. I tried and tried with the ATI card and went back to make onboard the primary. Neither seems to allow for visual effects upgrade nor 3d graphics in games.
Here is lspci:
View 2 Replies
View Related
Aug 8, 2010
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
View 6 Replies
View Related
Jul 29, 2010
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
Mar 12, 2011
How do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:
Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
[Code]...
View 2 Replies
View Related
Nov 8, 2010
Would a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies
View Related
Sep 4, 2015
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies
View Related
Apr 29, 2011
Proprietary driver does not work under ubuntu 11.04.I found this in Xorg log:
Quote:
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
View 2 Replies
View Related
Apr 30, 2011
on my old fx 5200 nvidia card, I installed the 173 driver and now when I log in to Default Ubuntu desktop with 3d enabled, like my screen will flash on and off like the panel and my awn dock turns white and then returns to desktop and repeats. You can only see the wallpaper and thats it. Useless! My desktop is virtually useless because I can't even use it. Gonna have to reinstall Ubuntu for the 5th time!
View 5 Replies
View Related
Jan 8, 2011
I have a system with two nVidia graphics cards, with monitors connected to each graphics card. I used nvidia-settings to setup a X server for each graphics card. Rebooted with saved xorg.conf file. I do see all monitors displaying their correct image. I am using Gnome 2 supplied with 11.3. The problem is: how do I start applications on the 2nd X server? If I use the application launcher on 2nd X server, the applications appear on the monitors of the 1st X server. I am also unable to move applications windows from one X server to the other.
View 1 Replies
View Related
Sep 10, 2011
i just upgraded my pc to 12.1 milestone 5 when i went to play my fav game (Xonotic) it was all laggy at 1 fps. I realised the graphics card app wasnt working anymore.Can any 1 fix PS and i had to go on failsafe too. PS2 milestone 5 workes flawlessly apart from the gnome 3 bug at startup
View 2 Replies
View Related
Mar 4, 2011
I run opensuse 11.3/kde desktop.
- updated to KDE:Factory
- X11 repository (V1.9.3)
- proprietary nvidia drivers (260.19.36)
Video card is a Quadro NVS 290. A dual head configuration using twinview is run.
The desktop becomes slow almost immediately (couple of seconds) after logging in (all applications). Turning off desktop effects does not make a difference as well as trying the various recipes on the internet regarding x.org conf-files.
The only action restoring responsiveness is to simply start nvidia-settings. Putting the following pseudo-action into a script-file and mapping it to a key allows to have a workable environment:
nvidia-settings -a PixmapCache=0 && nvidia-settings -a PixmapCache=1
It is very annoying having to press a key every minute or so. Instead of creating a cronjob I would like to solve this issue. This behavior has been consistent across kde/x-org/nvidia/kernel updates for many month now.
View 6 Replies
View Related
May 23, 2010
i have GF 6600..when i have install Karmic i was install driver NVIDIA for my GF6600 then finish n restart. but when my CPU booting to Ubuntu..Its Blank..the Driver its not work(Make my Ubuntu Error). Then i Install New Ubuntu Lucid..then i Install the Driver again(i think its will work)...But when i restart n Booting to Ubuntu...Same Error again, The Driver make Blank Screen??
View 5 Replies
View Related
Jun 26, 2010
I'm just coming from Ubuntu(don't hate me) and realized that there are no Nvidia drivers in the repos. I had trouble even getting the repos to respond on the live cd or after installation; is opensuse having network problems? I changed the repositories to the GA tech libraries because they are closer and now they work, However I can't get any Nvidia drivers to install. Now, I'm not a super linux guru that can fly around linux like super man, but I'm also not a newbie to linux. Or at least I think I'm not.
I need to get Nvidia drivers installed...what is the easiest way to do that, considering the URL... repo doesn't seem to want to connect either.I don't know what the deal is, but Internet is rather clumsy with opensuse or with KDE, I'm not sure yet.
View 9 Replies
View Related
Apr 2, 2010
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies
View Related
