Ubuntu :: Ubuntu Nvidia Driver And Dual Monitors And Forum Don't Work
Jan 17, 2009
I've had so many problems with Ubuntu. it runs fine version 8.10 64 bit, but I can't install nividia drivers to run both my monitors. and of course steam games don't work... So I thought I'd join the Ubuntu forums to ask questions on has to fix it... NOT EASY. I tried to join there forum, but I could not even find a page to make an account? dose anyone know how? They expected me to all ready have one... and after an hour looking at the Ubuntu web site I could not find anywhere to make an account and join there forum. So here I am, hoping someone here can help.I just want to install the Nvidia driver for both monitors work and I might be able to install a 3rd party softare to let me play steam games. but Ubuntu keeps asking for some codes... I'm not sure what they are and when I try and update Ubuntu, if askes me for a password. I never set any passwords as I'm still learning the OS, so I tried "Root" and "Guest" both in lower and upercase, and both don't work. What is the bloody password, I never set one, so why is it doing this to me? I can't update Ubuntu. And it keeps asking me for some bloody code to install the Nvidia drive I downloaded? why? what is this code and where do I get it? And then other searches I've done tell me to get a "command line" and enter a command that deletes and/or fixes the problem... problem is that I have no idea how to find this command line in Ubuntu and know one what's to tell me, like it's a bit secerate, and I can't even join there forum to ask.
I'm a windows expert and work in IT with windows, but I thought it's time I learn more about other OS's, but Ubuntu is makeing it very hard as I can't even join there forum or install a Nvidia driver to run both my monitors, I'm just about to give up on Ubuntu as the surport form I can not access and there is no info on there web site on how to install and run dual monitors, and I can't sign up for there forums anywhere.
I'm trying to set up my monitor and tv for dual display but I'm having some problems. I want them to display the same thing so I've enabled twinview and I figured the second display position should be set as clone but when I save xorg and restart the x server the position reverts to absolute. Anyway, the monitor is set as the primary display and it's the one I'm having problems with. The tv is fine but the monitor's display is stretched off the screen so I can't see the far right or bottom of the screen. I'm very new to linux and I'm just finding my feet so if there's any other info needed you'll probably have to be very specific.
I just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.
fresh install of 11.04 on a built system (frankenstein leftovers), 2.something ghz, 1gb ram, a host of drives, and a 64mb nvidia mx440 with svideo out. Boots up, looks pretty, something about unity not finding 3d graphics (fine, i don't really want it, just more fancy gui crap to suck cpu cycles) and runs fairly well. so I think, cool, svideo out, old 52" rear projection....HTPCish. "Lemme get this thing hooked up to the tv, what a great idea" So, I start looking around and find all kinds of wrong posts about not Natty, and not my video card, and I try this n that,and it doesn't work. I'm all about reading the forums, but I can't find the right info for my sitiation, and I'm overwhelmed/irritated.
Long story short, I added some repository ppg something, and then dl'd and installed the "nvidia-current" driver. After a reboot, I fire up the nvidia gui, and it tells me I have no xorg.conf and to run a particular command in terminal to make one. So I did it. and after another reboot, my system just hangs at "ubuntu" with the four (five?) dots. Reboot, recovery, something something something, safe graphics, backup your xorg.conf? yes. reboot and all is ok now. still no nvidia support. Now I'm reading the internet machine about the xorg.conf being old school, and how I have to make a monitor.conf file with config settings. only problem is it tells me to go to x11/xorg.conf.d/whatever. I have no xorg.conf.d directory. So what's the deal? How in the hell do I get the nvidia driver installed (I think I got that), configured (I have no clue), and running (yeah, I just saw a flying pig)?
I need a seperate workspace on each monitor and I use nvidia propriatary graphics drivers (I have a Geforce 9500 GT Graphics Card. It has one dvi port and one vga using both for my monitors.) The only problem is whenever I try to save the settings I apply something like twinview or the seperate x workspaces with the second monitor enabled It applys it but this is what happens in sequence (It may be only twinview that does this but i'm not sure not at my home computer right now):
1.) Picture cuts out to a blank screen on main monitor 2.) Pictures turns on in the second monitor (Its a seperate workspace from the main monitor) 3.) 3 to 5 seconds later the picute cuts out to the second monitor 4.) I'm left with two blank screen monitors and no way to turn the GUI back on other than a complete restart of the computer.
I need help on both of these issues. If it helps any one monitor is a CRT (The one on the right) and the one on the left is an LCD (The LCD is the main one). I also have Ubuntu 9.10 32 bit Karmic Koala if that helps. Lastly I have the latest propriatary graphics driver from nvidia (185 I think.) I also installed the driver from nvidia via Jockey (I think thats the name of the default driver installer for ubuntu..?) That is my situation and as you can tell its a pretty complicated one.
I have dual monitors running successfully with my BFG GeForce 8400GS and NVIDIA X server settings. The only problem is every time I restart, the settings go back to default, so I have to setup the dual monitors again.
Ever since upgrading from F11 to F13, wallpaper spanning has been driving me nuts. No matter what the size of the wallpaper, I cannot get it to span two desktops correctly anymore. Most styles (zoom, scale, etc...) cause the image to be duplicated on both screens and the "span" style centers the image between the screens and appears to scale down the image leaving large gaps on either side. It's like the background program doesn't recognize the "virtual resolution".
I have an Nvidia card that supports two monitors. Actually I have it setup. The problem I am having is I want to turn one of my monitors sideways so I can read forms easier. I can do this with just one monitor. RandR works fine with that. But it seems that when the system makes the two monitors into one long one it will not allow me to tweak the rotation in RandR.
Is there something I am missing. I deal with a lot of contracts and forms. And when I am reading them I hate scrolling. So I thought this could be an option. I have searched the net for 6 hours now. Maybe I do not know what I should be searching for.
- NVIDIA GeForce 6600 GT video card - Gigabyte EP35C-DS3R motherboard with 3 gig ram, few TB of hard-drive - dual monitors, both viewsonic vx2235wm, primary on analog, secondary on digital (but whatever, happy to reverse the order)
On the old setup (8.04) the monitors were set up as twinview, 1680x1050 each, no problems. On the new setup (10.04) my old xorg.conf (see below) doesn't work and nvidia xserver settings refuses to detect my second (digital) monitor at any resolution greater than 640x480.
I've tried messing with xorg.conf to no avail and google doesn't appear to be my friend.
Here's the old xorg.conf file that worked in 8.04 but refuses to even boot under 10.04:
I used preupgrade to upgrade from F11 to F12. In F11, I used the proprietary nVidia drivers from rpmfusion, and they worked well. I have refrained from installing the nVidia drivers in F12, because of the problems reported for users of KDE. I removed my old xorg.conf, which has references to the nVidia driver and to "TwinView," the proprietary method of managing two screens, so as to let X discover both monitors.
Now, however, my second monitor stays black, even though xrandr and KDE RandR show both monitors correctly. Xorg.0.log shows the nouveau driver is loaded. (I also tried to create a new xorg.conf following guidelines from the web, but many of the guidelines are from before xrandr, and I'm not confident I have it right yet.) It seems that X believes I have two monitors, because I can drag a window off into the blackness (and it's never heard from again!) I know that the hardware is working, because I just booted into Windows 7, and I could see the desktop on both windows.
How do I convince X and KDE to display on both monitors?
I have openSUSE 11.4 with standard KDE and two screens attached.Here's the question: How do I configure dual monitors when using the proprietary nVidia drivers?The openSUSE 11.4 installation put in the "nouveau" drivers for my nVidia card and I was able to configure dual monitors using KDE's Configure Desktop --> Display & Monitors GUI configurator. I could also set up dual monitors using a script based on xrandr (e.g. "xrandr --output VGA-1 --auto --pos 0x0 --output DVI-I-1 --auto --pos 1920x0")My screens are detected as VGA-1 and DVI-I-1 by the nouveau drivers.
OK, today I switched to the proprietary nVidia drivers. Only one of the screens is now detected and displayed in the KDE monitor configurator and that's marked as "default" rather than as a VGA or DVI connection.When I run xrandr to configure monitors, I get error messages if I refer to VGA or DVI hardware.
More info -- RPMs nvidia-gfxG02-kmp-desktop-260.19.36_k2.6.37.1_1.2-23.1.x86_64 x11-video-nvidiaG02-260.19.36-24.1.x86_64
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer: OS: Ubuntu 9.10 32bit Motherboard: ASUS M3A78 CPU: AMD Phenom 9500 Quad Core Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia) Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM Ram: 4 GB (I think, its been awhile since I built this thing) DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
Anyone want to take the time to help me get my ATI x16XX to work with dual monitors?I'm really tired and frustrated after upgrading to lucid and having the "vendor" drivers stop working.I can get a screen up, but cannot get the free driver to recognize the fact that I have two monitors.I tried renaming my xorg.conf and rebooting, but that caused my system to stop at startup.
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
I'd be grateful for any suggestions to get a second TV/Monitor to work in addition to the desktop monitor for a PC which runs Lenny. The first monitor is a small TFTLCD 15". Works perfectly with a GEForce FX 5200 nvidia graphic card and uses the 173.14.09 driver. Having obtained an SVGA cable, I connected the card to a rather larger 32" LCD Panasonic TX-L32S10B TV to enable some armchair viewing of internet etc for my parents. The Panasonic TV or monitor shows all the boot messages but the graphical server fails to start. I know that both screens work, either alternatively or simultaneously, having tested with a Puppy live CD. However, running
nvidia-xconfig --twinview results in an incorrect screen resolution for the 15" TFT Monitor; Gnome Screen Resolution Preferences gives a rather surprising fixed setting of 2048x786/50Hz when the maximum should be 1024x768. The resulting xorg.conf file is:
cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildd@ninsei) Fri Sep 5 22:23:08 UTC 2008 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0
I'm using F14 with the above video card. I've tried installing proprietary drivers from ati's website but am getting message that suggests that it's not compatible with my kernel version. I've tried using gnome's configuration util which does detect second monitor and configures it. But when I click apply the second screen goes blank even though I'm able to move mouse to and from it.
I have two monitors - one connected to the VGA port and the other to the DVI port. Fedora seems to be detecting both monitors (figured this out because when I rotate the desktop cube, the second screen is also seen.). However, the monitor on the DVI port is blank. This happens even if I use just one monitor with the DVI port. I cannot install the proprietary nvidia drivers because my computer hangs (has been happening since fedora 11 or 10), Is there a way to get both monitors to work with the nouveau driver?
I faced this problem in Fedora 13 as well and was hoping both screens would work out of the box in F14. Is there any way I can do this to make it work like nvidia's TwinView?
computer 8300 dell 82875 intel setup as follows:drive A master xp installeddev/sda master boot filesystem dev/sda1drive B slave ubuntudev/sdb (grub 2.863gb)grub.cfg set root=(hd1,1)until it gets to microsoft home edition, it changes to(hd0,1)drivemap (hd0)it automatically boots in XPi followed an example on windows xp in the forum for dual boot.
I have recently installed FC15 on my system. Dual monitor support seems to be broken with my setup. I am using the latest NVIDIA binary blob driver (270.41.19). I compiled my own kernel for it, version 2.6.39.
When gnome3 starts it almost manages to boot up, but then it crashes and gives me the option of logging out. I have my system booting into target 'multi-user.target' since I was doing some other stuff and I use `startx' to start gnome3. I tried running having X use xinerama and not use xinerama, both cause gnome3 to crash, albeit in different ways. Other than that I am running a stock install as far as I know.
If there are some logs I should be looking at for gnome3.
on my old fx 5200 nvidia card, I installed the 173 driver and now when I log in to Default Ubuntu desktop with 3d enabled, like my screen will flash on and off like the panel and my awn dock turns white and then returns to desktop and repeats. You can only see the wallpaper and thats it. Useless! My desktop is virtually useless because I can't even use it. Gonna have to reinstall Ubuntu for the 5th time!
i have GF 6600..when i have install Karmic i was install driver NVIDIA for my GF6600 then finish n restart. but when my CPU booting to Ubuntu..Its Blank..the Driver its not work(Make my Ubuntu Error). Then i Install New Ubuntu Lucid..then i Install the Driver again(i think its will work)...But when i restart n Booting to Ubuntu...Same Error again, The Driver make Blank Screen??
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
I've been having big problems getting 9.10 to work with a Geforce4 MX-4000 card. I know it is not a hardware problem because I've got a dual boot win xp/9.10 setup and the video card works very well under win xp. The monitor is a Samsung P2250. The issue is that the highest resolution available after installing the recommended nvidia 96 driver is 800x600, the same as that before the driver was installed. This is very frustrating because the monitor requires 1920x1080 I'm not sure whether the driver is at fault or the xorg.conf settings.
Should I try installing the nvidia site drivers? I've checked out several forum threads on xorg.conf settings but I'm really not sure how to go on this. What I need is an entry level guide to setting up xorg.conf. The manual here is not that user friendly.
I want to be able to login on different users on my two screens. Is that possible? It would be nice if I could have the left screen and my gf could have the right. I'm using ubuntu 10.04 with gnome, and I have a Nvidia graphics card.
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
