Ubuntu Installation :: No Unity After Upgrade To 11.04 (NVidia Driver)
May 5, 2011
I was running 10.10 with an Nvidia Quadro FX1500 and was able to get the effects (Compiz) working after following the manual driver install (found here) and editing my xorg.conf file. After this upgrade, Xserver (my desktop) wouldn't even launch. It just kept going into a terminal for log in. Not bad - better than not being to do anything at all. I removed all my nvidia drivers
Code:
sudo apt-get remove --purge nvidia-*
and then created a new xorg.conf file (and later moved to /etc/X11) using
Code:
Xorg -configure
That now allows me to log in to my desktop. However - no Unity. I've read that some people have had luck with the Nvidia 173 drivers, but not here. When I downloaded the current nvidia driver for my card (Quadro FX 1500) from nvidia, and went to install it manually using (from the directory where the download is)
Code:
sudo sh NVIDIA-Linux-x86-270.41.06.run
Eventually, it errors out with this: The compiler used to compile the kernel (gcc4.4) does not exactly match the current compiler (gcc4.5). For the record, I can't boot from a thumb drive ("boot error") or CD (both were created and tested on a Windows 7 machine.)
I want to use my video card, but after upgrade i got this message:
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
will be apreciaTED, after running from terminal I got this
CODE: rey@rey-desktop:~$ sudo nvidia-xconfig [sudo] password for rey: Using X configuration file: "/etc/X11/xorg.conf". Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf'
I've just installed Lucid Lynx on both my machines in the interest of sitting and waiting for the Unity/Gnome 3 storm to blow over. On the HP (see below), everything works great, and I've followed instructions online on how to upgrade to LibreOffice, upgrade the kernel to 2.6.38 using the kernel PPA, etc.
However, on the IBM, I'm using Nvidia proprietary graphics drivers. These work well on the stock kernel that 10.04 installed (2.6.32-32), but installing 2.6.38 seems to break the driver. If I install the driver first, and then the kernel on top, X stops working and I have to revert to the default, generic driver to get back in. Once there, I cannot install the driver again. The Additional Drivers dialog goes through the motions, but then drops a "systemerror: installarchives() failed" error message.
So, is there a different version of the driver I should be trying to install? I should clarify at this point I tried all three options the Additional Drivers dialog provided me, all gave the same result (version 96, version 173, and version current).
Or should I leave the kernel at 2.6.32? Is there any downside to leaving it?
I've loaded 11.04 with Unity on a Dell GX260 test machine (2.4 GHz P4, 1 GB of RAM, 40 GB HD, GeForce 6200 video card). I've tried installing both accelerated video drivers, but Compiz won't start and the Additional Drivers program informs me that the driver is loaded but "This driver is activated but not currently in use." How do I put it into use? There seems to be no switch for that effect in the system controls, and I haven't found any informative posts.
My 4 yr old Dell XPS 400 has a nVidia GeForce 7300 LE card which won't run Unity as is. How do I determine without actually attempting to install 11.04 if there is an updated driver available that will allow this machine to run Unity?
I've been using an NVIDIA driver from NVIDIA's site (190.53) for a while. Now I want to upgrade to Lucid. 1) Is it recommended to uninstall this driver prior to upgrading to Lucid? 2) If yes, how do I go about this? Please be specific, since I don't want to presume anything and make a mistake.
I just upgraded from Lucid via update manager. I removed the video driver before upgrading like it was recommended in some posts but now i can not get it back. If I go to System>>Administration>>Additional Drivers nothing is listed. I tried installing the driver from Software Center but i could not enable desktop effects. After it was installed form SF it was displayed in Additional Drivers as installed but NOT in use.
I'm a Karmic user, using a Nvidia Geforce 9500GT video Card.
I'm telling you about my GPU, because since I upgraded to the 190.42 Nvidia "official" new drivers, what's happening is:
My Compiz is no more able to save it's configuration across the sessions, and every time I close my PC or when I simply need to restart my active session, Compiz needs to be started again manually, It do not auto-activate by the compiz setting preferences. Doing: System --> Preferences --> gnome-appearance-properties (TAB: "Visual effects") and click on "normal" checkbox, to activate the compiz visual effects.
Is there anyone able to teach me how to save the compiz activation, in order to avoid the manual, boring, repetitive, activation each time?
I'm using a Dell Precision M65 portable workstation, often plugged to a docking station and with an external monitor attached. The graphic card is an nVidia Quadro FX 350M. I've been using openSUSE 11.2 until recently (with KDE 4.3.5). Then, during a routine update, the nVidia driver was upgraded from version 260.19.44 to 270.41.06. Desktop effects stopped working, and even after disabling them, some applications (presumably relying on direct rendering) do not work properly. I decided then to install openSUSE 11.4. The problems remain, with the additional issue that I can't switch anymore between the external monitor and the laptop display. I've tried several options using nvidia-settings; the original configuration when the system was working was "TwinView", "Cloned".
Direct rendering is still on: Code: phoebe:~ # glxinfo | grep -i rendering direct rendering: Yes but glxgears, for instance, while giving very high FPS, produces only a black window instead of the usual rotating gears.
The problem seems similar to the one cited here: openSUSE:Most annoying bugs 11.4 - openSUSE However, in my case, it appears with a driver newer than 270.29, so I am not sure this is the same issue. I also tried to follow the advices given here: SDB:NVIDIA troubleshooting - openSUSE without success.
I also noticed that my card (Quadro FX 350M) is no longer in the list of supported cards for that driver (the closest I could find is Quadro FX 360). But, again, it may not be relevant for this issue. So, at this stage I'm considering downgrading to the previous version of the driver (260.19.44). Before doing that, however, I thought to check for configuring options I may have missed.
Summary of HW/SW: Model: Dell Precision M65 CPU: Intel Core2 CPU T7200 @ 2.00GHz Graphic Card: nVidia Quadro FX 350M Driver: NVIDIA 270.41.06 OS: Linux 2.6.37.6-0.5-desktop i686 [openSUSE 11.4 (i586)] + KDE 4.6.00 (4.6.0) "release 6"
The problem started with: Driver: NVIDIA 260.19.44 OS: Linux 2.6.31.14-0.8.1-desktop i586 [openSUSE 11.2 (i586)] + KDE 4.3.5 and were absent with: Driver: NVIDIA 260.19.44 OS: Linux 2.6.31.14-0.8.1-desktop i586 [openSUSE 11.2 (i586)] + KDE 4.3.5
I did an upgrade of Nvidia(Latest version v.196) and KDE-base4 to KDE 4.4.4(I think) in Yast2. Now when I reboot the X doesnt start. I claim it can't find any nvidia-module. I thing the upgrade of Nvidia v.196 failed, so I need to know how to reinstall Nvidia in console(CLI). It only boot up in cli. I thought it is so simple to just download the latest driver and install in CLI, but my NetworkManager doesnt start eighter so I don't have any network.
OpenSUSE 11.2 64bits KDE 4.4.x Nvidia NV140 Quadro 512MB
I guess my mistake was to upgrade both KDE and Nvidia in the same operation.
Upgraded from 13.0 to 13.1 following the instructions. Downloaded latest nvidia package (NVIDIA-Linux-x86-96.43.16-pkg1.run) for my geForce4 MX 4000. Compiled and installed new module (old one was 96.43.13).
Xorg fails to start with this: Code: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Slackware 13.1 Slackware Linux Project Current Operating System: Linux mercury 2.6.33.4-smp #1 SMP Wed May 12 21:39:37 CDT 2010 i686 Kernel command line: BOOT_IMAGE=Linux ro root=805 vt.default_utf8=0 3 Build Date: 05 May 2010 01:54:53AM
Current version of pixman: 0.16.6 Before reporting problems, check [URL] to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.....
I have an Nvidia graphics card,... actually I manage several workstations that run centos and have an nvidia video card. I also have a personal computer with ubuntu and an nvidia network card.
I would like to do a regular automatic update of those Centos workstations. (With a pilot group to test and then a full roll-out). Until oktober 2009 no major difference in automatic updating ubuntu and centos (apart from the differences between apt and yum):
After a kernel upgrade, the systems can not boot into it's Xorg gui, because the nvidia driver must be rebuild (=not recompiled, because this is partially object code, the driver is not opensource).
But from ubuntu 9.10 onwards, the kernel update process checks for the presence of propietary drivers like those of nvidia and does a rebuild on the reboot, so that the system can succesfully boot into the xorg GUI (and gdm or kdm) My question is: Are ther any plans for Centos to do the same, this would relief me from some upgrade hassle for the Centos workstations that I manage. Or does anyone know about a (good) automagic workaround?
I'm on Wheezy with version 304.117 of the proprietary nvidia driver installed and working, but an application I have needs a newer version of the driver. I'm trying to install the 319.82 version in backports by following the instructions given here, but when I issue the command to install nvidia-kernel-dkms, I get the following:
The following NEW packages will be installed: libgl1-nvidia-glx-i386:i386{a} nvidia-driver{a}
The following packages will be REMOVED: libgl1-nvidia-alternatives{u} libglx-nvidia-alternatives{u} libxvmcnvidia1{u} nvidia-glx{u}
The following packages will be upgraded: glx-alternative-nvidia glx-diversions libgl1-nvidia-glx libgl1-nvidia-glx:i386 libnvidia-ml1 nvidia-alternative nvidia-installer-cleanup nvidia-kernel-dkms nvidia-settings nvidia-smi nvidia-vdpau-driver xserver-xorg-video-nvidia
The following partially installed packages will be configured: mint-flashplugin-11:i386 12 packages upgraded, 2 newly installed, 4 to remove and 151 not upgraded. Need to get 32.3 MB of archives. After unpacking 9,440 kB will be freed.
The following packages have unmet dependencies: glx-alternative-mesa : Depends: glx-diversions (= 0.2.2) but 0.5.1~bpo70+1 is to be installed. Internal error: found 2 (choice -> promotion) mappings for a single choice. Internal error: found 2 (choice -> promotion) mappings for a single choice.
The following actions will resolve these dependencies:
Remove the following packages: 1) glx-alternative-mesa 2) glx-alternative-nvidia 3) libgl1-nvidia-glx 4) libgl1-nvidia-glx:i386 5) nvidia-alternative 6) nvidia-kernel-dkms
[Code] ....
Accept this solution? [Y/n/q/?] q
The mint-flashplugin problem is a separate issue which I've had for a while. I assume that it can be ignored for the purposes of this post.
If I'm reading the aptitude output above correctly, it's telling me that the only way to "resolve" the conflict is by uninstalling all nvidia support, leaving me with no driver at all. Is that right?
After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
I am running Maverick Meerkat now, and will think about upgrading to Natty next week. I have a question--I run GNOME as the environment now, and if I do upgrade, will Natty replace it with UNITY?
Upgrade of kubuntu to 11.04 from 10.10 using kpackagekit appeared okay, as did the reboot and login from the new panel. Then, instead of seeing my custom background and plasma desktop all I see is the color wash of the Unity background. There is a right button menu in this desktop with a Create Launcher option that allows me to make launchers for konsole, firefox, and ksystemlog. Windows come up, but with Unity window decorations. Sure enough unity-window-decorator is running, but there is no plasma. System logs don't reveal anything obvious that failed. There is a kdm process running and kdeinit4 appears to have tried to start klauncher and kde4, but they are not actually running.It seems like somehow GNOME and Unity have somehow collided with the KDE environment.
I recently upgraded to Ubuntu 11.04. Most of the upgrade went well except for one package (mpd). Ubuntu rebooted and went into a sexy-ish minimal grub. I launched Ubuntu, everything went fine. The only thing I can't seem to get working is Unity/Gnome. When I log on with kdm and choose 'default' or Ubuntu Classic, everything loads fine except for the taskbar/whatever interface. (I usually run wmfs instead of kde/gnome and I'm not sure which interface is currently installed right now. I have both kubuntu-desktop and ubuntu. )
I can still, however, right click and see my desktop/desktop icons. The only thing that does not load is the gnome/unity interface itself. I need it to manage my fonts to fix my wmfs fonts that got screwed up. (I'm using a bitmap font and it doesn't work unless I activate whatever settings I have to activate. )
I am not home right now and this was written on a phone. I apologize if this whole post seems confusing/total blabber. edit: Ubuntu Classic works fine, but Ubuntu/Default does not automatically launc the Unity interface.
I installed Ubuntu two ways, both by partitioning the hard drive and installing Ubuntu in its own partition, and also where the "run within Windows" option was available. I then upgraded both to Ubuntu 11.04. When I start Ubuntu in the "own partition" installation, Unity runs without complaint. When I start Ubuntu in the "run within Windows" installation, Unity baulks, giving an error message that I don't have some (unspecified) of the hardware it needs to run, and I am kicked back to the classic Ubuntu control screen setup. Obviously the two ways to install Ubuntu don't result in it having the same behavior. Alternately, since the version installed to "run within Windows" seems to do no such thing, and also gobbled up almost all the free space in my Windows-7 partition without prior warning, any clue how to uninstall that version cleanly?
X is working, I get a desktop, all updates are current, just no Unity menus/window/widgets/whatever, blank desktop with single mapped network folder and no working keyboard shortcuts after initial login. I upgraded on Alpha 2 and it ate my desktop, never has given it back for 3 months. I assumed eventually the upgrades would fix it. Looked into ditching Unity and doing GDM, but thought I'd wait it out, ran dpkg-reconfigure unity and it did nothing, can't find any relevant errors in the logs, where should I be looking and/or what should I be doing? Running lots of servers on this box and have dual-boot, otherwise I'd probably torch it and start over.
If I just upgrade my 10.10 to 11.04, will it replace gnome with unity? I tried unity before and it is not satifying because it is not customizable, I feel I have less options and less power over what my interface looks like and how it behaves. Same case with gnome3.I'm wondering if when I upgrade to Naughty will I have to go through a lot of messing around with packages and configuration files to get back to gnome2 ? Do we have an option when we upgrade to choose between Unity, Gnome2 and Gnome3?
I was running Ubuntu 10.4 netbook version (with Gnome) on my Dell Inspiron 910 and yesterday it told me there was an upgrade available, to Natty. I followed the links, did the download, and left it to install overnight. When I got up today, it said it had a problem, because an application was using a file it needed. I thought I had closed everything before I started the process. I acknowledged the message, and proceeded to restart.
I ended up with the standard 10.4 Ubuntu screen, but with no tool bars, status bars, or anything. Just the wallpaper. Keyring login came up and I signed in, wireless said it was connected. So it looks like things are working, just no UI as such. Poked all the screen edges with the mouse, but nothing popped out.
Ctrl><Alt><Del> brought up the logout screen, and if I clicked on Help, I could ultimately get Firefox to run. (Note: the Help screen talks about Gnome, but it had the new popout scroll bars).
If I hold down <Shift> on startup, I get the GRUB menu. I am running linux generic 2.6.38-8 , but I am not sure where to go from there. Running dpkg didn't help.
I've just upgraded my Ubuntu version a week ago and got a problem that the Unity UI won't running after upgrade. My laptop is Dell Inspiron 14R which is i think is more than capable for running Unity 3D. When I rebooted after upgrade there was just a blank wallpaper screen, without Unity interface at all.
I have been bashing my head against the keyboard for over 6 hours now i just got a brand new asus ul30v it uses Nvidia geforce G 210M.
I went straight to installing ubuntu 10.10 on the whole disc. when the installation was complete i was happy and logged in. only seconds after i logged in i was promted that i was recomended to install a driver for my graphic card, for 3d and such. so i followed the installation and was asked to reboot. so i did. but then ubuntu booted straight into fullscreen terminal.
While being in this terminal i have tried to purge and reinstall GDM amongst endless other things, including rebooting several times.
Not being able to do anything about it, i reinstalled, and repeated the installation of the driver. same story over again.
Bottom line is i have rebooted close to 30 times, and reinstalled over 5 times. ive tried installing from the terminal (excactly the same story). tried to download it from their homepage, then install it (couldn't install it because i had to turn off driver X and "terminate all OpenGL applications", wich i dont know how to do. tried googling it, but ended up worse than before..[url]
Im guessing i cant install the driver at all with ubuntu 10.10? i havent tried it with older ubuntu versions because, of course, i wanted the newest version.
I have barely been using ubuntu before, although i've had it dualbooted.
I have found alot of posts with people getting stuck in terminal on boot, but none of the solutions that worked for them worked for me, probably because they had different problems than me.
A few days ago I installed 10.04 Lucid beta-2 and it came up OK. I then chose the recommended Nvidia driver "version current", which caused my system to come up in low graphics mode. I removed the driver and the system came up with no X11. I gave up.Yesterday I installed again, hoping that newer updates would fix the problem. The boot is now OK with no proprietary driver activated and all updates installed as of now (April 14, 05:30 GMT).
The Hardware Drivers dialog shows two choices: Nvidia version 173 and "version current (recommended)". Both of these show the status "this driver is activated but not currently in use". The only option offered is the button "remove".
I just upgraded to 11.04 a couple days ago, and it didn't go smoothly because I ran out of space, so I had to pause it and grow a partition.
When I got done there were several problems. One of them is that my nvidia proprietary driver is no longer being used. I found it in "additional drivers" and activated it, but it says "no proprietary drivers are in use on this system. This driver is activated but not currently in use."
I can run the nvidia control panel just fine, and write an xorg.conf file, but after I reboot the above message stays the same.
My xorg.conf file says to use the nvidia driver. My Xorg.0.log shows the nvidia board coming up what seems to be normally.
The "appearance" control panel doesn't even have the special effects tab anymore.
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
I installed the Nvidia driver. When I click on the "Monitors" package it then asks if I want to use my graphics drivers vendor's tool. I say yes and then it pops up the Nvidia X Server Settings dialog. In that menu it indicates I need to run nvidia-xconfig from root. I did this and then restarted the xserver but to no avail I get the same message every time I try to run "Monitors", that I need to run nvidia-xconfig.
I wish to update my nvidia driver (I was running 195.36.24 and I want to update to 195.36.31). I followed all the instructions on this thread (http://ubuntuforums.org/showthread.php?t=1467074) and everything went well until this part:
Code: sudo sh blahblah.run
The error I get in the terminal reads: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL]...I have no idea how to exit X as it's not in my system processes.I have updated my nvidia driver in the past but have never encountered this problem. I'm running Ubuntu 10.04 on a Dell XPS M1530 if that matters.
I would like to know if anyone has installed the latest NVIDIA driver on Ubuntu 10.04 (64-bit) which is 256.35 (x86_64).
I am currently having some problem (unstable) with the previous release 195.36.31 (x86_64) and am now considering updating; but, am still reluctant because of possible problems during the installation process.
