I have an ATI Radeon 9000 Graphics card that Ubuntu 9.10 doesn't seem to recognize no matter what I do. Knowing that its an older card and that ATI stopped support for it a while ago, I was wondering if anyone knows if I would have better luck on Ubuntu 8.04. I can't get 3d or opengl to work, or install the correct ATI Driver.
View 2 Replies
I have an Acer Aspire 5516 and have been running ubuntu for a while. I couldn't resist the upgrade notice to 10.04 so I did it. Unfortunately it doesn't seem to recognize my video card ATI Radeon X1200 and I have to boot in safe graphics mode. I can use my computer but the display is a bit off. I have tried to install the ATI driver but get the following:
ATI Technologies Linux Driver Installer/Packager
Error: ./default_policy.sh does not support version
default:v2: x86_64:lib32::none:2.6.31-14-generic; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.eqUOxU
I have recently installed Karmic to a portable hard drive (WD elements 500gb) so that when it is plugged in the grub can boot and i can go into ubuntu 9.10 and when it is out windows 7/vista dual boot screen shows. When in ubuntu, there is no driver for my 'NVIDIA GeForce 9200M GS' graphics card available so i am stuck with the no effects mode and the games are poor.
Previously i had this same setup (but with jaunty) and the graphics card worked well, i could have all the wobbly window effects etc, but now i can't have anything.How could i get a driver for this?BTW, it is running through USB 2.0, although it is very fast.
I've tried various searches and haven't found anything quite matching this. Please forgive me if I am repeating though. I upgraded my Dell D600 (ATI Mobility Radeon 9000) from Karmic to Lucid. On Karmic, all 3D effects (Expo, Rotating Cube, etc.) worked fine. On Lucid, all still work but, once once enabled, the 3D effect is very dim - almost as if the backlight on the effect itself is turned off (i.e., when rotating the cube, the cube is dark but the background Skydome is illuminated). Once the effect is over, normal illumination returns. Running Karmic from the live disk and the effects are fine again. A buddy upgraded his D610 (next ATI in the line) and does not have the same issue.
View 3 Replies View Relatedaccording to this, the radeon kernel module is not recognizing my card. This is disabling DRM in Xorg.
Here are the Xorg errors:
Code:
(II) Loading extension XFree86-DRI
(II) Loading extension DRI2
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
[Code]....
I just installed fedora12 on my machine,But it didn't recognize to my graphic card! my ATI card type is radeon 9550.
View 6 Replies View RelatedI had a problem with OpenGL on my computer (I run Ubuntu), and so I created a thread here: [url] but it turned out that the problem was with my graphics card, so I made a new thread at the Ubuntu forum at [ubuntu] Problem with OpenGL in Ubuntu - Ubuntu
View 4 Replies View Relatedfind the manuel download for my radeon 7500 graphics card. I'm having a hard time finding it. Also, please look, at this other thread, I'm having a big problem: [URL]...
View 1 Replies View RelatedI can't install my graphics card Radeon HD 3200, I use the same driver as I always do. But this time it did not work, it boots with an X error and I can't get into gnome.
Here is the Xorg log.
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
[Code].....
I'm having problems with my graphics. I have ATI mobility radeon hd 3650 and I get an issue with desktop effects. They can't be enabled even though the card is supported. I had some trouble with installation and used this thread's instructions: http://ubuntuforums.org/showthread.php?p=9133906. I finally seem to have it installed and configured but I still can't use desktop effects. Also this whole process started because I couldn't get minecraft working getting the GLX13 error.
View 1 Replies View RelatedI am thinking about buying a new computer. It has ATI Radeon HD 3000 Graphics. Does Fedora 14 support ATI Radeon HD 3000 Graphicst? Will I have to install a driver and if so where would I download the driver?
View 4 Replies View RelatedI just lost my weekend trying to install Xubuntu 10.04 on my pc I made the ps a while back - its built on a ASUS P4S800D-E motherboard and it has an ATI Radeon 9200 LE graphics card. It has a PS/2 keyboard and mouse, 1Gb of memory and a 160Gb PATA/IDE hard drive (I unplugged the SATA drives) Every time I installed or made a tweak to the config it failed in the same way. It showed its failure by continually repeating the first character typed. Regardless of whether this was the password screen for synaptic or just the first character typed into a terminal. Until the first character was typed the mouse seemed to work ok but then it would stall too
I've tried most things, running Xorg with/without an xorg.conf file, loading the ppa kernel and tweaking loads of bios and grub boot parameters all to no avail. So I think I want a more linux friendly graphics card and I fear I may need a new motherboard. Can someone recommend a replacement graphics card for this motherboard? Can anyone reassure me that my motherboard is ok with linux?
I'm having trouble getting this to work, everytime i pop it into the motherboard and start my computer it beeps at me and won't start, i'm thinking it probably just won't work but does anyone have any ideas that MIGHT make it work? i've downloaded the driver package off the ATI website and it doesnt seem to install anything. maybe possibly just hardware conflict??
View 7 Replies View RelatedI recently bought a HIS HD 4670 IceQ card but can't get it to work in openSUSE 11.2 Under Windows the card works fine, so I assume there is no hardware problem. I tried this card in two computers with different mainboards, but it does not work. Several times I reinstalled openSUSE completely from scratch (tried both 32bit and 64bit versions) but no luck. The problem: Right after the installation it uses the radeonhd driver. This basically works, but without 3D (no Tuxracer...) and even 2D is slow (dragging around windows on the desktop is slow, page scrolling in firefox also).
Then I tried to install the ati proprietary driver, both from rpm (the rpm's from the "official" ati repository have a checksum error, as already mentioned in another thread!), and by downloading the driver from AMD and running the install script. The install script seems to work successfully. The kernel module is compiled and loaded. "aticonfig --initial" makes a rudimentary xorg.conf. But then, when starting X, it does not work:
- on one of the 2 tested systems, even kdm does not start, the screen simply stays black with a frozen cursor top left, even CTRL+ALT+backspace doesn't do anything - on the other system, kdm starts and shows the login screen, but when trying to start KDE kwin crashes, and the windows have no title bar (when I googled for this symptome I found lots of people also having this problem...) - trying to configure the system using sax2 didn't help, even sax2 doesn't display properly I have now spent 4 days trying to get this to work and now I'm really tired of those buggy graphics drivers, be it proprietary or open source...
Can anyone recommend me a graphics card that is approximately as powerful as the radeon 4670 (I bought this card because it is said to be the most economical card (both in price and energy consumption) that allows to play Anno 1404 reasonably well on windows), but is known to work in openSUSE 11.2, even in 3D mode (tuxracer...)?
I have been just pretty much having fun with Ubuntu and a couple other distros for a couple years and have not yet ran into a problem like this. I'm pretty good in a command line environment although I end up googling syntax a lot b/c of that wonderful memory I have! Anyways..
I am running an older machine: P4P800 ASUS Mobo, P4 2 Ghz, 3G RAM and an ATI Radeon 9000.OS: Ubuntu 10.10 Maverick Meerkat Issues: Seems that anything that Compiz has to render the brightness is really low. CairoDock (w/ OpenGL) does not render like it does on other machines that I have, looks like garbage. I've come to the conclusion that I need to get a better video driver (Hope I'm correct here otherwise I've been going the wrong direction for awhile now).
Things I've tried through research around the net: I've attempted installing fglrx(command line style) from several tutorials I've found here and there. Most of them for older versions of Ubuntu and if I'm remembering right there have been a few significant changes lately, which may be causing my issues? Of course I've tried the easy ways: Installed all fglrx/ati/radeon related packages in Synaptics Package Manager
Checked System > Admin. > Additional Drivers before and after package installations
Ati Website - the drivers that they have are for XFree86. I don't think they can run on XOrg - it's a completely different setup? Again, I don't have a great understanding on how the back end of all this works, so bear with em.
I ran: echo options radeon modeset=0 > /etc/modprobe.d/radeon-kms.conf To disable KMS.
Rebooted - Video was much worse I then ran: echo options radeon modeset=1 > /etc/modprobe.d/radeon-kms.conf To re-enable KMS Rebooted again. Everything ran fine but I didn't have my Cairo Dock > which I can deal with, that's not why I'm posting.. Well, that's a good chunk of it - there's more but I don't remember most of it as I've been working at this on and off for weeks. Again, a lot of this was tried upon researching anything and everything I could find on the net - so some of it might sound ridiculous, I was just trying anything that would work!!
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
I am trying to use an ATI Radeon x300 graphics card with my current system setup with fedora 12 but i am having an openGL issue. I am trying to create a 3D model using comsol and i get an error like:
Failed to initialize 3D graphics. OpenGL not fully supported.
This is a hardware/software issue with the graphics card... not the program COMSOL. How could i enable openGL support to correct this issue?
I have an ATI All-In-Wonder 9000 AGP4x video card with TV tuner function. I following the description on [URL] where I found a how-to for enabling TV tuner. The tuner works in xawtv and avview but without sound. I plugged the cable in from tuner to my sound card and try to increase volume and/or enable mute on/off but nothing to hear. The sound card line-in input works correctly, because when I attaching my MP3 player I hear sound over the sound card. I think maybe have a register accessing/writing error which handle the TV Tuner sound chips to turn on/off. (the tuner works correctly in Windows XP). I'm using Ubuntu 8.04.4 LTS with x86_64 (amd64) actually. The lspci output for Video Card:
[Code]....
After having problems with an onboard graphics chipset I've just installed an ATI Radeon 128Mb 9000 Pro AGP graphics card into my old computer... The problem is that I can't get it to use 1440x900 resolution that my LG L194WT (Ubuntu won't detect it) requires and the highest I can select is 1360x768 and that looks all wrong
lspci gives:
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01)
And /var/log/Xorg.0.log gives:
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
[code]....
just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
View 7 Replies View RelatedI have a sandisk sd card with 3 partitions two ext2 and one fat 32 partition for some reson Ubuntu only automounts two ext2 partitions. I've tried inserting another card with only one fat32 partition and the system doesn't mount it. Both cards are visible in gparted byt not in "Places" menu.
View 4 Replies View RelatedI'm running Joli Cloud 1.2 on my HP dm1z netbook and for some reason, it doesn't seem to recognize my wireless card. Because the HP dm1z has no ethernet port, I had to use a USB adapter to connect to the internet.
View 2 Replies View RelatedDo I need to install drivers or something to get it to recognize that my laptop is equipped with wireless? It's a Toshiba Satellite L505-S5990.
View 9 Replies View RelatedI have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
View 4 Replies View RelatedI'm a new Mandriva user,and have no clue about Linux system,but to be honest I don't want to use Windows product anymore. So I got the Mandriva 1 Spring Gnome,and installed it on my DELL Optiplex Desktop,works fine and very fast,therefore I decided to do the same with my Studio XPS 1640,but after I got a dark screen,so I used an external display(My TV) then realized that it doesn't support the video card on it ( ATI Radeon HD4670 ),and I don't know what to do.
View 1 Replies View RelatedSo the only experience I have with Linux is all from Ubuntu, and I just spontaneously decided that I needed a change...two days later my triple boot Macbook Pro got slimmed down to a dual boot OSX/OpenSUSE 11.2 machine. But there are some general problems, and I have absolutely no idea how to solve them. First, wireless isn't recognized at all...there isn't even a space for wireless connections. Second, I haven't been able to get compiz to work yet, and I can only suspect that the system doesn't recognize my video card, or the driver isn't installed. Yet again, no idea how to fix this.
View 9 Replies View Relatedi bought a new laptopt Gateway, core i3, intel video card. I've tested ubuntu and mandriva without good video results. I have installed Fedora 12, i'm using an external lcd samsung screen on the vga port, it works fine. My display properties shows two screen as well as the correct resolutions...the problem it that i can't use my latopt screen, i have tried different resolutions..but nothing. I can't use mi laptopt without an external screen.Even if i boot without my external screen, my laptopt screen goes black.
View 14 Replies View Relatedmy cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
View 2 Replies View RelatedSo Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 4 Replies View RelatedIf you have a Radeon graphics chip and upgrade to Jessie, install firmware-linux-nonfree, before rebooting.
My dist-upgrade to Jessie seemed flawless until I rebooted and couldn't get into X.
Seems Jessie boots into Gnome by default, but Gnome now requires 3-D acceleration. For my Radeon graphics chip (ATI Radeon 3100), this requires firmware-linux-nonfree, which I didn't need before and was not installed as part of the upgrade.
A boot message alerted me to this need.
I was able to get X going with xinit. I used FVWM; for XFCE I believe the command is:
xinit /usr/bin/xfce4-session -- :1
and from there I installed the package firmware-linux-nonfree.
