I have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
I am trying to install Ubuntu 10.04 LTS on a Windows XP Media Centre Edition system.On the Step 4 of the installation which usually gives you the option to partition the disk but it only gives me the option to Erase the entire disk or specify partition manually, although this also doesn't allow anything other than totally erasing the disk. I'd ideally like to keep my Windows and I have installed Ubuntu before (but 9.10) on a different system.
No option to install alongside another OS. I have Win7 Starter on this new netbook and need to install Ubuntu 10.10 netbook addition. Disk Management shows 4 partitions, one is C:, one is D:, and two I've never seen before they're so small. Is it safe to delete these or do they have a purpose for the current Win OS? I would gladly install the 10.10 to my D: drive which seems to be SDA2, the 131GB partition. What's the right sequence of partitioning and formatting to give Ubuntu the full install it needs manually? And what needs to be taken care of for a Swap drive?
I want to install Ubunto netbook on my compaq mini 730, but I want to keep my windows xp OS as well and have the dual boot option. At the moment I have the hard drive partitioned to C and D. My question is - what is the best way to install ubuntu and keep windows ? Should I create a separate partition for it ? if yes what size ? Can Ubunto install itself on C next to windows automatically ?
I have install ubuntu and windows in the same computer in their own partition. I think that I have remove something while I was reinstalling some wireless stuff using synaptic. When I launch the computer I get the dual booting but only with memory test and windows. I have the ubuntu installation cd. What can I do to get back the dual booting with the facility to launch ubuntu.
I've installed Windows 7 Ultimate on a notebook which previously ran Vista. No problems there.I've now installed Ubuntu (now updated to 10.04)so that it can boot to either OS.
It all works fine and when I first power up, I get a screen which invites me to select the OS I want to use. There are however two problems:
1) it defaults to Ubuntu (whereas I would prefer it to default to Windows 7 (it's a work laptop and most of the applications are Windows-specific),
2) the list of choices is getting increasingly complex with an expanding list of choices (with each major update of Ubuntu adding more); it even seems to include an option to go back to Vista!As long as I move down the list and make the right selection quite speedily, I get to where I want to be (though, as I say, I would like to change the default option).Is there any way I can edit/shorten this list without damaging the functionality and how can I change that default?
I've installed Lubuntu alongside my existing Windows XP installation. The menu came up on boot allowing me to boot into either Lubuntu or XP. But, after I install all the Lubuntu updates and restart, the option to boot into XP is gone. The boot menu comes up, but no XP option. I reinstalled Lubuntu again with the same results: after the updates, no XP option. I'm thinking I will reinstall Lubuntu again, and before I run the updates, I will make a copy of grub.cfg for later reference so I can add the XP section in again- am I on the right track here?
Initially had windows xp in my system. Picked up on free partition (*it was not a primary partition*) and installed Debian from CD. The installation went fine. Towards end of installation the grub install ran detected windows xp presence and I continued with the install. End of install, prompted that the system would reboot.
However on reboot, I wasnt presented when boot option ( windows xp vs debian) but my windows xp directly got booted. How to get this boot option.
A while ago I messed up my Ubuntu installation so I decided to boot the install from the disc again and overwrite it. It turns out the installation disc does not give you the option to replace a current Ubuntu installation so I was forced to take more space out of my windows [vista] installation. This means I now have 1 ruined Lucid Ubuntu OS, 1 Working Lucid Ubuntu OS and a windows Vista OS system. Is it safe to delete my ruined Ubuntu from inside vista? Is it possible to overwrite my Ubuntu installations? How can I delete them both and then install Lucid again?
I want to know this now as Maverick Meerkat will be released on Sunday and I want to install that in a clean installation without deleting my vista installation. I do not have the Vista installation disc because Vista came pre-installed. I am not willing to buy anything.
I have a /boot partition, and the online update process has downloaded the upgrade to /boot/upgrade. The problem is that grub is actually booting from a directory /boot which is in the root partition, but is invisible once the machine has booted, because the /boot partition is mounted over it. The result of all this is that the upgrade option does not appear in the boot menu, because that option has been inserted in the menu.lst (or grub.conf) in the /boot partition. is it ok for me to run:grub-install /dev/sda4(that's the device that contains the /boot partition where the upgrade menu option and data). Also, do I need the --root-directory option, given that the boot directory is the root directory of that partition.
All this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4). 2. I can access the windows partition from Linux and see all the files. 3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP. 4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
I am trying to dual boot windows 7 and ubuntu 11.04. I downloaded ubuntu on to a DVD-RW and booted up my computer from the DVD. I follow the installation process until the part where there is supposed to be three options to install. I only get two options and I get the message "no other operating system detected on this computer" so it doesn't give me the option to dual boot.
I have a single boot ubuntu installation (that I like very much) that I want to migrate to a larger hard drive that has an XP installation on it so that I can dual boot on one hard drive. I've already partitioned it.
So:
Hard drive A: has Ubuntu on it
Hard drive B: has two partitions, one XP the other one waiting for Ubuntu.
I'd rather not just install Ubuntu all over again as it was annoying to install the wireless dongle. among all the other secondary installations and tweaks that have been done.
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this: - is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or - did I do something wrong in the install process? or - is this some weird bug manifesting itself?
First time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub. Before I would have just edited menu.lst, but now?? I dunno. edit; Here's fdisk with Fedora on sda6
I have a gateway laptop that I have attempted to dual boot, but the computer only sees the Ubuntu OS and the Vista Windows Recovery Partition. (Actually, gnome reports 3 separate Ubuntu OSs... part of the problem?)
When I type fdisk -l, I get the following message code...
I have a dual boot (2 hard drive) system, and upgraded to 10.4. Booting into XP results in a flashing cursor that doesn't do anything. I know that GRUB screwed everything up, but I need to know what to do--and assume I don't know what I'm doing--to restore my dual boot ability.
Here's what I get after running a boot info script code...
I just recently upgraded my kubuntu install from karmic to lucid and now it takes about 10-15 minutes to boot. Directly after the upgrade it was pretty slow already, but it got worse every day from then. The karmic version was a wubi install I moved to a dedicated partition using lvpm. Here are the results from the bootinfoscript code...
My first attempt at seeking help has not been very successful. Probably to much of a narrative. If you want to know How I got in this mess see my first post.
Machine: Asus Eee PC 1015
What I know: I can't boot into anything but Live USB
What I think: Win7 starter is still there Mint9 is lurking as well Vista recovery partition exists
What I don't have: External USB DVD or CD drive Win7 Recovery
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
I've created my own wheezy live usb-hdd using:# lb config -a i386 --mode debian --distribution wheezy --linux-flavours 686 -b usb-hdd --bootloader syslinux --memtest none -p xfce P: Considering defaults defined in /etc/live/build.conf P: Creating config tree # lb build The binary.img was created. Now if I try to boot from this image using qemu, I get a message "No bootable device" If I check this main partition using gparted, the flag is "lba" instead of "boot". Even doesn't work if try to change to "boot". How to solve this problem?
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
I am installing ubuntu on a Dell m7750n machine that has the KSOD. I have done almost everything I can find to fix it. I was able to remove my data off of it using regedit....
So, I am sick of MS and found linux. I installed unbutu netbook on my netbook and it works like a charm.....
So, I went to install this on my desktop dell.... I have read of the many issue with this...
I was not able to boot from the CDlive as is. I kept getting a black screen with nothing. I then used the f6 to get into grub and then choose f6 to change the load options to load nomodeset and was able to load ubuntu from the drive, not install.
I would like to install ubuntu, but when I click on install from the 'tester' version it will not give me the option to install along side another OS (windows) that I see in the install ubuntu main website in the see how to do it.
I get two options: Erase and use entire disk Specify partitions manually (advanced)
Question: Can I install and select my own partitions using: [url]
Or, is there something wrong and I need to get that fixed before I install ubuntu?
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
Every tutorial I've seen on installing a dual boot environment assumes you already have an installed OS (usually Windows). My wife's XP system is pretty hosed, and she's been interested in Ubuntu. Because she's ripe for an XP re-install anyway, I'm planning on backing up her data, completely wiping her hard drive, and installing a dual-boot Windows-XP/Ubuntu environment. Any good step-by-steps for this, with good hints on how to partition, etc.?
If not, my plan B is to reformat and install a basic XP system, and then follow one of the tutorials for going dual-boot over an existing install. Does that make sense? I should mention, I've used Linux for years as a user on my ISP, but have only been using Linux on a home system for a couple months; so I'm fairly new to the install and administer side.
After having tested Ubuttu 9.10 on a VM with Win XP Pro as host and running both Ubuntu 9.10 and 8.04 from a CD/CDR drive I decided to do an installation of 8.04 on a separate HD and import files.Installation seemed to work OK, but on reboot: no menu was shown to choose OS and the machine booted directly into Windows.Tried to boot directly from the "Ubuntu" HD in the BIOS boot menu and get the message "MBR error" full stop literally.The Ubuntu hard drive is no longer recognised in Windows , can't be acessed from the DOS prompt and obviously cannot be reformatted from there.Just for the record, I'm not totally excluding operator error from the cause
