Ubuntu Installation :: Broken OS Selection In GRUB (extensive Details Inside)?
May 10, 2010
I have installed these OS's in this order:
1 - Vista
2 - Ubuntu Server 9.04
3 - Ubuntu Desk 10.04
4 - BT4
I recently upgraded my most often used OS (#3) to 10.04 version and it updated GRUB to GRUB2 as part of the dist-upgrade. I have a feeling that I wasn't careful enough when installing BT4 or I made a mistake in the partitioning. I had plenty of space that was free waiting to be used by some other os and I designated some of that space for BT4.
When I got it all installed (off of a USB live boot) I rebooted and noticed it was back to grub one. The Vista install and the Ubuntu Server install both work still... but the recently updated (to Grub2) Ubuntu Desk install now hangs immediately after selecting it and pressing enter in Grub. I can mount the partition within BT4 just fine and see that all my data is still there, it just won't boot.
What I've tried Using BT4 to install Grub2. (no luck) Installing Grub1.5 back after finding Grub2 didn't work. (no luck) My plan When I get home from work today I'm going to take the "quiet" option off of the boot command in Grub for that Ubuntu OS and see if there's any error it's dumping before it hangs.
Hope that someone has had this issue before and can just tell me a straight forward way of resolving this issue. I'd prefer to use GRUB2 as my boot loader.
Cliff Notes Had other OS's installed Updated to newest Ubuntu (installed GRUB2 as the new bootloader)Used some spare disk to install BT4 New Ubuntu that used Grub2 is now the only OS that won't boot
View 5 Replies
ADVERTISEMENT
Oct 5, 2010
Installing 10.10 RC dual boot with Win7. Is there no place in the installer to specify where Grub will be installed? I don't want it installed in the MBR I want it in the partition with / (I usually only create two partitions for Linux / and swap). I prefer to chain load grub from my windows bootloader.
View 4 Replies
View Related
Jan 14, 2010
Finally got a dual boot on this laptop the way I liked it (LOVE my Win7, really like UBUNTU for certain things like getting booted and on the net fast...great). As I was editing and rebooting the GRUB settings UBUNTU got it's updates and installed (including one on GRUB that I hadn't seen before - WITH WARNINGS). Now I can't seem to get this last entry out of the boot menu: vmlinuz-2.6.31-14-generic. It has all this listed now (had dual entries for everything like mem test before):
vmlinuz-2.6.31-17-generic
vmlinuz-2.6.31-14-generic
Windows 7
I got rid of the extra entries like memtest and all using: sudo chmod -x /etc/grub.d/20_memtest86+ and such variations..still though I got one stuck in the boot selections. It won't remove the old linux vmlinuz-2.6.31-14-generic build entry from GRUB (and they both point to the same place). It has a -14 and -17 entry in it now. Like I said both load to the same mount point.
I mean I removed like five extra entries from GRUB using that command after the update (and had done it before about two months ago) but the linux vmlinuz-2.6.31-14-generic selection won't leave the GRUB selections now. I really thought I had it figured out to the bomb having my laptop dual booting before, just didn't like how UBUNTU used my disk space by default last time so I decided to rebuild the laptop.
View 8 Replies
View Related
May 3, 2010
First let me describe my system setup. I have windows, ubuntu 64 and ubuntu 32 present. I upgraded the 32 bit version to 10.4 with no problem. After upgrading the 64 bit version is when the problem occurred. I believe it has to do with the grub.cfg file. When I would choose the 64 bit version the screen would just go black, no furthur action. After making a few changes to the 64 bit selection in grub.cfg i come to a screen that says c to continue, s to skip mounting, and m for manual mount. Pressing s gets me in. Here is a copy of my grub.cfg.
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
[Code].....
View 1 Replies
View Related
Feb 17, 2011
Im using the following system setup: When I boot my business computer, I can choose between 3 setups, 2 Windows XP, 1 DOS. I installed Ubuntu with 1 Windows XP system which looks something like this:
System 1 (XP)
System 2 (XP) --> after selection, Im able to choose between the XP system and Ubuntu on a new screen
System 3 (DOS)
Now interesting for me is obviously System 2. After I select System 2, I can choose between XP and Ubuntu. After I select Ubuntu, I come to another screen, where I can choose again between 4 Ubuntu entries with different kernel versions (including their recovery modes) AND both XP systems (yes, again). I installed Grub Customizer. I removed all the XP entries and all but 1 Ubuntu entry from this screen. I also set the timeout until booting Ubuntu on this screen to 1 second to start as quick as possible and Ubuntu boots fine.
My question now is, is there a way to skip the screen with former kernel and XP selection and boot Ubuntu directly after already choosing (between XP and Ubuntu) on the first screen? I know, 1 second "waiting" is not too bad but skipping the screen completly would be superb.
View 3 Replies
View Related
May 15, 2011
I downloaded Ubuntu 11.04 yesterday. The ISO allowed me to install Ubuntu using Wubi and it worked just fine in Windows (I used a virtual drive to mount the ISO). I liked it enough to want to replace Linux Mint on the Laptop with it.After a LOT of trying, I was finally able to make the liveUSB of Ubuntu 11.04 32-bit version.[URL]isplays the boot menu and if I select 'try Ubuntu without installing', I am greeted with a blank screen which just does not go away until I hard reboot the system. Also, the grub I am getting is NOT the purple one which usually is the default; instead, its a dark screen with a black-n-white titled Ubuntu logo. So the question of using the NOMODESET doesn't arise at all. I am using Dell XPS 15 with dual OSes - Linux Mint and Windows 7. Both Mint and 7 are 64-bit OSes but I am trying to install Ubuntu 11.04 32-bit version.
View 8 Replies
View Related
Jan 2, 2010
I just attempted to install ubuntu for the 4th and 5th time and have yet again had a fail. This time it actually completed the installation, which is a first. however upon reboot it takes me directly to Vista - I don't see grub or a o/s selection choice.
View 9 Replies
View Related
May 20, 2011
I have installed Debian a few times now (and other distro's), so I'm fairly used to installing linux. I'm not used to installing it on Apple hardware (back in 2009 on my laptop I had some issues that were solved rather quickly, but that's about it). Now I'm installing Debian Squeeze on a new (well, bought today, but it is the previous model: iMac 11,2) desktop iMac.
Installing goes well (resizing partition, rEFIt, booting Debian 6.0.1a netinstall CD, installing packages etc.) I followed a tutorial [URL] to install grub explicitly with force after installing and running gptsync. Everything went according to the tutorial and I rebooted to be welcomed by rEFIt and then grub: perfect!
BUT when I chose Debian in the grub-selection list, I only see a few lines of starting the kernel, and then my screen goes all black. A few seconds later I hear a sound, and iirc it's the sound of gdm prompting to select a user. I cannot switch to a TTY and I have to use the power-button to shut the system down.
View 6 Replies
View Related
Jun 15, 2010
PC specs: i7 920, Ati HD5870, 4GB ram Installing Ubuntu 10.04 from a USB stick. The stick is fine as I installed Ubuntu on my laptop with it no problem.
Problem #1: The grub boot manager is missing. The first time I installed Ubuntu it appeared as usual and let me choose between windows 7 and ubuntu. Due to the black screen issues I uninstalled Ubuntu. Since then, every time I've tried reinstalling it I don't get the grub boot manager, instead my PC goes straight to windows. I have formatted the partition I installed Ubuntu on, as well as installing it on another drive, to no effect.
Problem #2: After the Ubuntu splash screen, I'm greeted by a black screen. After a few seconds my monitor goes into standby. Ctrl+alt+f1 does nothing, and removing quiet and splash from the command line didn't help either. I hear I need to use vesa drivers but I have no idea how to go about this when I can't even get the OS to start in the first place.
View 6 Replies
View Related
Nov 30, 2010
I've tried to find it on google, but I want to have my OS Screen Selection to have a cleaner look than what it currently looks like. I understand we can edit Grub 2 but nothing I've found shows me what to edit into the file. I have all of the files I just need to know which one to edit and what to put into the file so my OS selection looks better
View 2 Replies
View Related
Dec 13, 2010
I have had a working ubuntu 10.10 installation for about 2 months. I had it set up really nicely with my TV card and xbmc. I was really happy until I tried to boot it the other day to show a movie to the Mrs. All I seem to get is a flashing cursor after the initial grub selection. This is the same for both recovery mode and normal. I have booted it after editing the boot selection to removed the quiet splash and it seems to hang after a line that says some thing like "usb 1-4.2: new low speed USB device using ohci_hcd". The machine boots fine in to the Windose partition or in to a live CD.
I have done a bit of searching and I am struggling to find a good step by step troubleshooting guide. I dont really want to blat my setup but it would teach me a lesson about documenting things and blindly doing upgrades. I have included the results from my boot info below in case that points to anything.
[Code]...
View 3 Replies
View Related
Dec 23, 2014
My Toshiba Satellite C870-198 has Debian 7.7 installed in UEFI mode alongside Windows 8.1. The GRUB menu no longer displays, but the machine boots straight into Windows.
I can boot into Debian or Windows from rEFInd installed on a USB stick. The rEFInd menu has the following entries:
The Debian entry actually launches the GRUB menu which was installed with Debian.
Code: Select allBoot Microsoft EFI boot (Boot Repair backup) from Basic data partition.
Boot supposed Microsoft EFI boot (probably GRUB) from Basic data partition.
Boot EFIubuntugrubx64.efi from Basic data partition.
Boot EFIdebiangrubx64.efi from Basic data partition.
Boot bootootx64.efi from Basic data partition.
Boot vmlinuz-3.2.0-4-amd64 from boot.
In an attempt to fix GRUB I executed the commands in the 'Reinstalling grub-efi on your hard drive' section of: [URL] ....
Code: Select allmount /dev/sda1 /boot/efi
... surprisingly returned:
Code: Select all$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
Did not find any restart pages in $LogFile and it was not empty.
The file system wasn't safely closed on Windows. Fixing.
Code: Select all[ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"
... returned "EFI boot on HDD".
[Code] ....
... Where is Debian?
FULL HISTORY ....
=============================
The laptop came with Windows 8 preinstalled. I switched off Secure Boot and installed Ubuntu for UEFI dual boot. I recall having to use Boot Repair to get the GRUB boot manager working properly for both systems.
Recently I decided to replace Ubuntu with Debian 7.7 and first cloned the entire hard drive to a USB drive (The Clone Drive). This drive successfully boots into Ubuntu in UEFI mode.
Following this I took the opportunity to update Windows to 8.1, which broke GRUB as expected, so that the machine would only boot straight into Windows.
I installed Debian from a live USB stick in the mistaken belief that it would be bootable in UEFI mode. It did boot OK in legacy mode.
I then burned the full Debian 'DVD' image to a USB stick, booted it in UEFI mode and reinstalled Debian. In UEFI mode GRUB allowed me to boot into both Debian and Windows.
At this point I tested The Clone Drive. It was still able to boot into Ubuntu as previously, but after powering down, unplugging The Clone Drive and rebooting, the GRUB menu failed to appear and the machine booted straight into Windows. This is its current state.
View 13 Replies
View Related
Jun 2, 2015
I've changed my /etc/apt/sources.lst file to use "jessie" repositories instead of "wheezy". I then ran synaptic and updated everything (there were loads of packages, something like 2000 to update).
After this I rebooted. The grub menu shows as usual with the background image I'd set and the operating systems as usual (including Windows 7) however there is no longer a 5 second countdown and when I select *any* menu option, it asks for a username and password.
I don't know what username and password it's asking for as I never used to have one set!!! I did have a username and password set up so that if you wanted to edit a grub menu option so I tried that but to no avail.
I'm using MBR/BIOS not EFI.
View 3 Replies
View Related
Aug 23, 2010
I am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
View 3 Replies
View Related
Jul 31, 2011
I locked the screen, came back, typed the password, screen remained black, though cursor was visible and moving. Nothing I could do to rejuvenate the screen. Had to switch to tty6, sudo shutdown -r now. Then, on reboot obtained kernel selection, it proceeded to displaying kernel messages, but froze on sdb, after 3 secs. I figured it was the usb, so turned off, removed usb cables to external hard drives, but again it froze saying something about firewire mouse, the mouse is also usb. I tried several times, but no matter what kernel I chose, I couldn't get it to boot. So I loaded puppy live cd, but now it can't access some parts of the disk. I was running utorrent and the folder with partially downloaded files can be accessed but there's nothing there (there was), and some folders can't be accessed at all.
View 2 Replies
View Related
Jun 27, 2010
installed Python 2.4 and then removed already present Python 2.6. After restart, when i selected the working kernel, that white ubuntu symbol splashed and screen went black with two small lines at the top.. it doesnt go beyond that. Please help me. I tried selecting other kernels. It did not work. I used "nomodeset" by editing the the kernel at the grub..
View 1 Replies
View Related
Nov 11, 2015
I have an issue after the installation of debian 8.2 on an usb flash drive:
I had debian 8.2 and windows 8.1 running on a single SSD. Everything was fine. I wanted to install a second debian on a 32gb USB flash drive as a live system. After the installation I am not able to boot my debian (SSD) without the flash drive plugged in. I only get a grub rescue prompt. Booting windows still works. It is also possible to boot both debian systems if the USB drive is plugged in.
So it seems to me, that the debian bootloader was accidently installed to the USB flash drive and the original bootloader on the SSD does not work properly anymore. I used a netinst image from a second USB flash drive to install debian to the first USB flash drive.
Update fdisk output:
/dev/sda1 2048 2050047 2048000 1000M Windows recovery environment
/dev/sda2 2050048 2582527 532480 260M EFI System
/dev/sda3 2582528 4630527 2048000 1000M Lenovo boot partition
/dev/sda4 4630528 4892671 262144 128M Microsoft reserved
/dev/sda5 4892672 223840255 218947584 104,4G Microsoft basic data
[Code] ....
View 6 Replies
View Related
Jun 18, 2010
How can I change the behavior of the selection buffer or a program that uses it ( I have xclip) to not send me text until the mouse button is released while clicking and dragging? This causes havok in the software I'm developing that tries to make use of the selection buffer. I need the full selection, not bits more bits more bits and then the full selection.EDIT: I cannot listen for mouse events such as button release outside of the GUI of my program.
View 2 Replies
View Related
Sep 15, 2014
I have Debian Jessie 8.0 amd-64 installed. It is a dual boot system with Widnows 8.1 alongside. Both the systems work fine with a few glitches coming at times on jessie. But I assume it should get stabilised with time.
Problem is:
The usb keyboard is no longer detected until the GRUB stage crosses.
* This implies I am unable to press F2 to enter into BIOS
* I am unable to chose Windows 8.1 by using arrow key on the keyboard.
When the default system (first in the grub list), in this case Debian is selected after time runs out then the keyboard comes back to life and works properly thereafter.
So far I have tried the possible solution given at [URL] .... but it did not work.
Some Information
================
$ lsb_release -a
No LSB modules are available.
Distributor ID:Debian
Description:Debian GNU/Linux testing (jessie)
Release:testing
Codename:jessie
$ uname -r
3.13-1-amd64
View 1 Replies
View Related
Sep 25, 2010
I did not use the right search terms, but I didn't found anything on this in the forum, but I am sure this is a known issue. Its about running scripts in Firefox. When their runtime duration is too long, Firefox asks the user if he wants to stop the script. What I am worring about are these things:
Sometimes these scripts seem to take much cpu time. Especially when I run some Google websites like [URL]..when I wake up the system from standby, it takes som
View 1 Replies
View Related
Jan 9, 2011
On Windows I used to use a great little music player/organizer called MusicBee, which had extensive file organization capabilities; among them features like fixed length and conditional statements.Now, what I'd like to have on Ubuntu is program that organizes my music files as follows: (the colon indicating a fixed length)
Code:
Music/
[Artist]/
[Album] ([Year:4])/
[TrackNumber:2] - [Title]
So far that isn't too difficult, is it? But I do have some multi-disc albums, which I used to get easily organized as follows, using a conditional statement like "isempty()":
Code:
Music/
[Artist]/
[Album] ([Year:4])/
[DiscNumber].[TrackNumber:2] - [Title]
Thus, the big issue here is, since I've been looking for weeks now, does there exist a program that can handle fixed length as well as conditional statements to proper organize my music files?
View 1 Replies
View Related
Aug 2, 2011
I want to install grub inside windows 7. I don't want to partition anything neither I want to remove Windows Boot Loader (BCD). I simply want to Use Grub from windows 7 boot menu. I want to do this so for frugal install of linux distros such as puppy, slitaz, etc. I have used WinGrub on Windows XP and it worked fine. But I don't think that will work on Windows 7.
View 1 Replies
View Related
Apr 23, 2010
I'm trying to get 9.10 to work nicely on a Thinkpad Edge 14".Everything is working fine, except that I have issues with the intel graphics drivers.The monitor's native resolution is 1366x768 and I have Intel HD graphics card on it.I have changed my xorg.conf to use driver = "vesa", but now I get only a resolution of 1024x768.I tried to use xrandr to fix this, by adding a new mode etcetera, but this does not work - I believe because the driver is the issue.Also, doing Ctrl+Alt+F[1-6] gives me a blank screen rather than a console.
How do I find out the details about my graphics chip? Intel Corporation Arrandale Integrated Graphics Controller (rev 12)Maybe I should go more bleeding edge for my drivers? How do I do that?
View 4 Replies
View Related
Jan 8, 2011
Is there a way in ubuntu software center to see details while installing (like update manager that shows a terminal with apt command output)?
View 1 Replies
View Related
Feb 21, 2011
yum installation and configuration in details on Redhat / Centos 5.0
View 1 Replies
View Related
Aug 16, 2010
I have an AMD Athlon 3200+ 64 and I want to install a dual boot Win7/Xubuntu system. When I try to install Xubuntu 64 bit, but the also the 32 bit version and both Kubuntu versions, the installation stops after the keyboard layout screen. The install completely hangs (no cd or other noticeable activity on the computer) and I have to do a hard reboot to get out of it. I've been looking for a solution and found that the options noapic and/or nolapic in the installer F6 menu might solve this problem,unfortunately they didn't work for me. I've done the CD integrety and memory checks, but no errors were found. I'm pretty lost from here.
I also read installing from the alternative CD might work, but I'm not sure what to expect from this textual installation. If it's only a command-line installer I don't think I will be able to do much with it as I haven't yet been able to find a tutorial on how to use it. Does anyone konw where I can find instructions?
View 4 Replies
View Related
Jan 28, 2009
I am trying to install Fedora-ds on Fedora Core 10 and I am getting a weired error.it just says check the log file for more details and in the /tmp/setupXX.log
[09/01/28:16:01:35] - [Setup] Info Administration port
[09/01/28:16:02:00] - [Setup] Info 9830
[09/01/28:16:02:00] - [Setup] Info The interactive phase is complete. The script will
[code]....
View 4 Replies
View Related
Sep 11, 2010
I have been trying for a couple days now to install 10.04 on a 250G hard drive that was a USB boot with 9.1. I want the hard drive in the case. The bios has been changed and does see the new drive. Boot selection has been changed to CD Rom. Everything starts out fine until step 4 of the install, Prepare partitions. There is no hard drive available on this step. The HDD is not seen by the disk utility either.
View 6 Replies
View Related
Aug 18, 2010
had set up Ubuntu 10.04 the way I wanted it. I had it set up like this:80 GB Drive:39 GB Ubuntu41 GB NTFS for a later windows install)It was all good. I then created a slipstreamed windows install cd, for installing windows (I have the key, so its legal.) I created the slipstreamed CD because the old one was broken. I rebooted the computer and started the windows install. But unfortunantly I have two CD/DVD drives, and it installed from the broken CD. (freezes during install prosses)Now, I am stuck with broken windows AND no grub to boot into Ubuntu.How do I format the NTFS partition from the Ubuntu live CD for a clean install?
View 5 Replies
View Related
Mar 6, 2011
My good working system stopped working. At reboot I get
"GNU GRUB version 1.95 |ubuntu|0"
Is there a way to recover?
View 9 Replies
View Related
