I am trying to install Fedora-ds on Fedora Core 10 and I am getting a weired error.it just says check the log file for more details and in the /tmp/setupXX.log
[09/01/28:16:01:35] - [Setup] Info Administration port
[09/01/28:16:02:00] - [Setup] Info 9830
[09/01/28:16:02:00] - [Setup] Info The interactive phase is complete. The script will
[code]....
I"m unable to find the memory usage however top shows me the following results.
Tasks: 90 total, 2 running, 88 sleeping, 0 stopped, 0 zombie
Cpu(s): 21.1%us, 1.4%sy, 0.0%ni, 74.0%id, 2.4%wa, 0.0%hi, 1.0%si, 0.0%st
Mem: 8313376k total, 7969976k used, 343400k free, 185496k buffers
[code]....
and free shows the following.
total used free shared buffers cached
Mem: 8118 7764 354 0 181 7335
-/+ buffers/cache: 247 7870
Swap: 4000 0 4000
Total: 12119 7764 4354
how can i find the usage of memory which is being showed by top and free.
I download the live 64 and burned it to a disk after it burns to the disk Brasero checks and says "error some files could be corrupted." I burn it slowest burn same thing happen. I downloaded thinking I had a corrupted download. Same thing happen. I never had a problem burning iso until now. What am I doing wrong?
View 6 Replies View RelatedI did the "yum update" today, the process was doing well but, the follow error appears:
Transaction Check Error:
installing package kernel-PAEdebug-2.6.31.12-174.2.3.fc12.i686 needs 9MB on the /boot filesystem
Look:
Code:
Transaction Summary
==================================
Install 10 Package(s)
Upgrade 33 Package(s)
Remove 1 Package(s)
[code]....
I've been trying to update Fedora 15 for weeks. I always end up with a transaction error and the update stalls. The error reads: GPG keys listed for RPM Fusion for Fedora Rawhide-free repository are installed but they are not correct for this package. Check that the correct key urls are configured for this repository.
This is far too involved for a linux newbie, I think my only option is to reformat and reinstall. This is so frustrating, there are 250 MB of updates available that I can't access.
I have a bash script that i created for a colleague to configure the servers he installs. It does package installations, modifies some config files, creates directories.
The problem is sometimes he says that the script skips some steps. There are some steps that require user input and i think he chooses wrong option. (i have tested the script and it works fine).
My question is how can i save the output in a file (or log) so i can check if there are error? I know about the ">>" operators but will this "script.sh >> output.txt" still bring the dialogs for user input (like read input from shell and mysql password dialog from install package)? And how can i record everything he inputs?
I read about logger, but since there are a lot of commands do i have to log every command or can i just log the whole script.
I have a Hp Netbook, and my friend installed Ubuntu to my computer. Everything was going fine, until one day my battery died while I was searching the web. I turned it back on and It started checking files and then it took me to a black screen with white letters saying "File System check failed".
View 3 Replies View Relatedi have problem during boot my F11 , the problem is :
Code:
checking file systems
/dev/sda7 : superblock last time ( etc... )
/dev/sda7: Unexpected inconsistency ;run fsck manually (i.e,without -a or -p option)
***an error occured during the file system check
***dropping you to shell:
An error occurred during the file system check, dropping you to a shell; the system will reboot when you leave the shell. Give root password maintenance (or type control D to continue)
View 13 Replies View Relatedi ,musing mysql5 at fedora12 i have just installed it but i ,m using mysqladmin -p root password mypassword it says ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'mysqladmin -uroot password 123456' at line 1
View 10 Replies View RelatedI have a binary file which display a lot of message when I run that binary. This binary file is statically linked with many files which are unknown to me. Is there any way to know from which file (obj or static lib) does these printf come from?
There is a way to get to know about the source of a symbol, but I am interested about the source of a string.
I had to register with a new username, because I could not remember my logon details and have since changed ISP so could not get details sent, anyway that aside to the problem.
I upgraded to 11.04 and all went well (hence posting here and not in the Upgrade section) and it is running fine, well until yesterday.
I ran the update manager as I usually do when first entering Ubuntu and it did an update but then gave me an error message about file permissions and to check my connection (which was connected OK).It has also affected the Software Installer, and now I can not install any new software.
Is this a generic problem with the latest update or is it just my Dell Inspiron 1545 please?
my partitioning layout was as follows
Vista Recovery
Windows 7
GRUB
Extended
-->Fedora 12 (ext4)
so, I shrunk my recovery in Windows 7 successfully, and booted into my Fedora 12 live cd to run Gparted, and move the partitions so that the free space could go towards fedora, I did such, and then I couldn't expand the partition to my dismay. Next, I woke up this morning, tried to boot to fedora to run SSH, grub loaded, but when I tried to boot fedora, I got the "File system check failed" error, and when I tried 7, it just went to a blank screen with a single "_" in the top left-hand corner.
I am newbie in openSUSE as still in transition from windows OS. How to display file properties (details other than size, date, permissions, owner, group,type) using file manager applications similar to Dolphin, Konquerer, etc. I have heaps of files ported from windows environment where I used to store descriptive subjects in one of the file properties field. In windows environment, I would have used file manager such as explorer to display the selected file properties field when searching for particular file before opening it. I know openoffice supports the file properties feature but unfortunately it would appear Linux OS currently does not have a file manager application ready to display these information.
View 9 Replies View RelatedIve installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
How do I check disk error under Linux just like scandisk or chkdisk
View 2 Replies View RelatedI need a little help creating a ftp script that will take connection and file details from text files.For example:ftpscript.sh - script that looks for details and does transferftpparams.txt - ftp server connection details in single line csv formatftpfiles.txt - files that need to be transfer, one file per line.I have tried using awk with no success
View 2 Replies View RelatedStarted slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
View 14 Replies View Relatedyum clean all
yum update gives this error:
Code:
It has been working until this. I shouldn't think that I need both the 586 and the 64 versions, but it won't let me get rid of the 586 version. Trying to do that results in:
Code:
Is trying to remove kdelibs-6:4.4.1-1.fc11.i586 what I should be doing? Or am I being dense?
Tried upgrading from 8.04 lts to 10.04 and it wouldn't work b/c of too many mods to my 8.04 system? So I tried a fresh install per usb stick. System kept locking up during install, as well as when I run it from the usb, I've since learned. graphics card? I can't log into windows either per the grub loading please wait error 15. I've googled & searched the forums & everything I've tried doesn't work, there were some possible solutions that I don't understand how to do. can't get to a terminal to check or modify anything. Hitting "e" at the boot menu does nothing. I don't know how to do anything from here! Compaq Presario SR5350, 2GB RAM, Dual Core Proc 2150MHz. Dual boot w/Vista, HDD is partitioned separately with Root, Home & swap. Also, sda5 or / has been formatted to ext4, still using grub 1.5.
View 9 Replies View RelatedI am trying to run a program under wine which needs to use a license. The program is unable to check out the license file.
View 3 Replies View RelatedI have a text file with a long list of RPM's. I need to check if each RPM is installed. I'm sure I can cat out this file and run "rpm -qa" against it, but I'm having trouble with the syntax right now...
View 5 Replies View RelatedI am getting a message at my first re-boot after install of "Error 15: File Not Found", and that's as far as it goes. I just installed Fedora 11 on a Drive that I had recently ran Ubuntu 9.04. I did re-partition and format the drive. I am also running Win XP Pro on another drive, and can boot from either. The computer is older, but all the hardware seemed to work fine with Ubuntu and altough I had to format the install drive a couple times the installation seemed to go ok.
View 4 Replies View RelatedAfter preupgrading without problems, I did not reboot the computer inmediatly. I was surprised that, although preupgrade had finished, the terminal window was yet active and I closed it. On reboot, in the Grub window, one of the options is "Actualizar a (upgrade to) Fedora 14". If I select it I get: "Booting 'Actualizar a Fedora 14 (Laughlin)'
kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:UUID=02f7302b-aa56-4c33-b533- fa1549aa0860:/upgrade/ks.cfg stage2=hd:UUID=02f7302b-aa56-4c33-b533-fa1549aa0860:/upgrade/install.img initrd /upgrade/initrd.img
Error 15: File not found
Press any key to continue....."
and pressing a key it returns to the Grub window. The /upgrade directory doesn't exist, but it does the /boot/upgrade where the vmlinuz is. uninstall and reinstall the preupgrade, rebooting inmediatly, but I don't know how to uninstall and if this is the solution. How can I uninstall the preupgrade?
Im trying to run a program but my system won't let me.i used to be able to run executable files without a problem but i can't anymore when i double click the file i get "there is no application installed for executable files" i am unable to check "allow executing file as program" in file properties there is a script file which runs the program but all i get from the terminal is "permission denied"
View 14 Replies View RelatedHow do I resolve the transaction check error?
View 9 Replies View RelatedI am trying to install Wheezy testing i386 using netinstall .iso disk.
After the disk partition stage and while in the 'Install the base system' stage I get the message;
Debootstrap error:
The following error occurred: The bzcat is not available on the system Check /var/log/syslog or see virtual console 4 the details.
I have over the past couple of months downloaded three daily builds of testing and the md5sums are good on all of them yet I have the same problem with each disk.
I'm installing and configuring my first server using RackSpace CloudServers running Ubuntu Karmic Koala (9.10) and I'm now installing iRedMail. The installation runs successfully until I recieve this error:
Code:
The following packages have unmet dependencies: mysql-server-5.0: Depends: mysql-server-core-5.0 (>= 5.1.30really5.0.83-0ubuntu3) but it is not going to be installed
E: Broken packages < ERROR > Installation failed, please check the terminal output. I understand this is telling me there is some software that iRedMail (or something iRedMail is dependant upon) that needs installed. Is this correct? And if so, what is i needing installed and how do I do that (aptitude install example-package?)?
I downloaded Ubuntu 10.4 netbook edition for my toshiba satellite a105 laptop (windows XP) burned it to a CD, restarted my computer with the disc in drive, pressed f12 at the appropriate time, chose to boot from CD. after sitting for a second i get error PXE-e61 media test failure, check cable. and then it boots XP normally. how do i get around this to install linux!
View 4 Replies View RelatedI have decided to load the OS on a old HP Compaq DX2000 MT to see if its for me before putting it on my main machine.
I loaded Ubuntu version 10.10 last night everything was fine except I could not get my wireless adapter to work, I decided to connect via ethernet to get the latest updates and drivers.
After the updates and restart I now get the non executable memory error. when I enter
/usr/bin/check-bios-nx --verbose
I am told I have NX capabilities and should go to the bios and enable it. There is nothing in
the bios to enable as far as I can see. So I enter the command
sudo rm /etc/update-motd.d/20-cpu-checker