Ubuntu Installation :: Grub Broken + Black Screen On Boot
Jun 15, 2010
PC specs: i7 920, Ati HD5870, 4GB ram Installing Ubuntu 10.04 from a USB stick. The stick is fine as I installed Ubuntu on my laptop with it no problem.
Problem #1: The grub boot manager is missing. The first time I installed Ubuntu it appeared as usual and let me choose between windows 7 and ubuntu. Due to the black screen issues I uninstalled Ubuntu. Since then, every time I've tried reinstalling it I don't get the grub boot manager, instead my PC goes straight to windows. I have formatted the partition I installed Ubuntu on, as well as installing it on another drive, to no effect.
Problem #2: After the Ubuntu splash screen, I'm greeted by a black screen. After a few seconds my monitor goes into standby. Ctrl+alt+f1 does nothing, and removing quiet and splash from the command line didn't help either. I hear I need to use vesa drivers but I have no idea how to go about this when I can't even get the OS to start in the first place.
View 6 Replies
ADVERTISEMENT
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Apr 27, 2010
I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.
View 2 Replies
View Related
Jan 2, 2011
I installed Ubuntu 10.10 to dual boot alongside Windows 7 on a Dell Inspiron. This worked fine and after restarting it seemed to be working normally, after the first boot into windows though when I tried to restart the laptop again I just get a blank screen with a blinking cursor in the top left instead of the grub screen.I'm still able to boot the LiveCD fine and tried to reinstall Ubuntu but the exact same thing happened? Anyone know what's going on/how to fix this?
View 9 Replies
View Related
May 14, 2011
Here's the problem: My ubuntu goes into a black screen with "_" flashing after selecting the kernel in grub menu. Everything has been working just fine since I installed it (about a month ago, when 11.04 came out). The problem must have something to do with grub not finding the correct partition or something like that. I was messing around with pysdm, trying to make it auto-mount one of my partitions, so that's the likely cause of my problem. However, I did not edit anything on the ubuntu partition, only the partition where my files are located. Is there any way to tell grub which partition to load upon booting up?
View 9 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
May 3, 2010
I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.
View 9 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Feb 26, 2011
I have installed Maverick onto an INTENSO 320GB USB Hard Disk. I can boot from GRUB, but only get a dark grey screen, with no cursor. I have tried editing the boot script, removing "quiet & splash" and putting in "nomodeset". I have also tried "i915.modeset=1" and "i915.modeset=0". Also "xforcevesa" and "nouveau.modeset=0". None have worked. I have not been able to reach a console screen to log in. Here are the specifications of the machine:
[Code]....
Are the number of spaces between "ro" and "quiet and splash" essential? There are three spaces on the boot script and I have left them there. Ubuntu works fine as a live CD, and I experienced no problems with the installation.
View 9 Replies
View Related
May 31, 2011
I am installing 11.04 on a Gigabyte E7AUM-DS2H with an onboard GeForce9400. I'm trying to turn this into an XBMC htpc. I'm not using xwindows or anything like that. Going straight to console for now. I'm experiencing the GRUB Black/Blank screen. I just don't know what else to try...
1. I've changed the kernel boot options, i.e. nomodeset
2. I've toggled the GRUB_GFXMODE=640x680 line
3. I've remembered GRUB-UPDATE
4. I can get into GRUB menu using SHIFT at bootup, messing around with settings and CLI there
5. I started with default nvidia drivers (not good), and then installed nvidia-current - that works better.
6. At the blank screen, I can hit ALT-F1 into console/tty fine.
7. If I use nosplash --verbose, I get a long wait with a blank screen, then the last bits of the bootup log and the login prompt.
8. And stuff I've forgot I've done....
Now what I really can't understand is that I have XBMC installed AND working beautifully. I can set XBMC to autorun with no trouble at all. It's just the period between bios and XBMC that it all goes dark. When I quit XBMC, I get a blinking cursor, which I can F1 to the console. What is it with GRUB??? What am I missing? Why is this so difficult? I COULD live with it, but its just not right, and I want to get it right.
View 6 Replies
View Related
Jul 30, 2010
I am having trouble with the grub boot menu. I have a dual boot system, Windows XP 32 bit and Ubuntu 10.04 64 bit. Windows was preexisting when I installed Ubuntu. The install went fine but when I restarted, the Grub menu gives the option of the Windows boot loader but when I tab to that and press enter the screen goes black and the curser just blinks in the upper left corner...no XP boot. The XP drive is there as I can mount it from Ubuntu side but when I try to boot into it it does not seem to be there. What have I done and what can be done so that I can boot into the XP side?
View 7 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Sep 3, 2010
I have Ubuntu 10.04 installed on dell inspiron 5150. Original installation was perfect. Wireless Internet worked right away. Screen resolution was perfect. One day, after a month or so, after original installation I got a notification that new updates are available. So, I installed all updates. At the end there was a notification: Update is successful, please reboot. After reboot I got a black screen with the header:
GNU GRUB version 1.98-1ubuntu7(I hope it's not a ubuntu version of windows blue death screen). I could install 10.04 from scratch, but I can not do it after every update.
View 1 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Jun 28, 2010
I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
View 3 Replies
View Related
Oct 21, 2010
My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
View 3 Replies
View Related
May 8, 2011
I am running ubuntu 10.4, windows 7, and I had ubuntu 10.10 on a single hard drive. I upgrade the 10.10 system to 11.4 and now my grub menu which is on the 10.4 system shows two windows and two 11.4 installations.
How can I clean this up? Also I have tried to start with the grub 1.99 on the 11.4 system and all I get is a black screen at startup. I am happy with grub on 10.4 except for the extra lines.
[Code]...
View 9 Replies
View Related
Dec 23, 2014
My Toshiba Satellite C870-198 has Debian 7.7 installed in UEFI mode alongside Windows 8.1. The GRUB menu no longer displays, but the machine boots straight into Windows.
I can boot into Debian or Windows from rEFInd installed on a USB stick. The rEFInd menu has the following entries:
The Debian entry actually launches the GRUB menu which was installed with Debian.
Code: Select allBoot Microsoft EFI boot (Boot Repair backup) from Basic data partition.
Boot supposed Microsoft EFI boot (probably GRUB) from Basic data partition.
Boot EFIubuntugrubx64.efi from Basic data partition.
Boot EFIdebiangrubx64.efi from Basic data partition.
Boot bootootx64.efi from Basic data partition.
Boot vmlinuz-3.2.0-4-amd64 from boot.
In an attempt to fix GRUB I executed the commands in the 'Reinstalling grub-efi on your hard drive' section of: [URL] ....
Code: Select allmount /dev/sda1 /boot/efi
... surprisingly returned:
Code: Select all$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
Did not find any restart pages in $LogFile and it was not empty.
The file system wasn't safely closed on Windows. Fixing.
Code: Select all[ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"
... returned "EFI boot on HDD".
[Code] ....
... Where is Debian?
FULL HISTORY ....
=============================
The laptop came with Windows 8 preinstalled. I switched off Secure Boot and installed Ubuntu for UEFI dual boot. I recall having to use Boot Repair to get the GRUB boot manager working properly for both systems.
Recently I decided to replace Ubuntu with Debian 7.7 and first cloned the entire hard drive to a USB drive (The Clone Drive). This drive successfully boots into Ubuntu in UEFI mode.
Following this I took the opportunity to update Windows to 8.1, which broke GRUB as expected, so that the machine would only boot straight into Windows.
I installed Debian from a live USB stick in the mistaken belief that it would be bootable in UEFI mode. It did boot OK in legacy mode.
I then burned the full Debian 'DVD' image to a USB stick, booted it in UEFI mode and reinstalled Debian. In UEFI mode GRUB allowed me to boot into both Debian and Windows.
At this point I tested The Clone Drive. It was still able to boot into Ubuntu as previously, but after powering down, unplugging The Clone Drive and rebooting, the GRUB menu failed to appear and the machine booted straight into Windows. This is its current state.
View 13 Replies
View Related
May 20, 2011
I have installed Debian a few times now (and other distro's), so I'm fairly used to installing linux. I'm not used to installing it on Apple hardware (back in 2009 on my laptop I had some issues that were solved rather quickly, but that's about it). Now I'm installing Debian Squeeze on a new (well, bought today, but it is the previous model: iMac 11,2) desktop iMac.
Installing goes well (resizing partition, rEFIt, booting Debian 6.0.1a netinstall CD, installing packages etc.) I followed a tutorial [URL] to install grub explicitly with force after installing and running gptsync. Everything went according to the tutorial and I rebooted to be welcomed by rEFIt and then grub: perfect!
BUT when I chose Debian in the grub-selection list, I only see a few lines of starting the kernel, and then my screen goes all black. A few seconds later I hear a sound, and iirc it's the sound of gdm prompting to select a user. I cannot switch to a TTY and I have to use the power-button to shut the system down.
View 6 Replies
View Related
Jan 28, 2010
Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
View 9 Replies
View Related
Jan 4, 2010
I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.
View 2 Replies
View Related
Aug 30, 2010
I have an Acer Aspire One that runs Windows XP. I downloaded both the full Ubuntu (latest version but can't remember the number) and the Ubuntu for netbooks- each on a separate flash drive. I thought I had the netbook version in my Acer when I booted it up, but I saw it was booting the full Ubuntu version. Instead of allowing it to finish installing to run from the flash drive, I stupidly shut it down and removed the flash drive. Ever since then, when I try to boot my Acer, all I get is the black screen of death. I've tried the flashit.exe to flash the BIOS, but no luck. So, I'm guessing it's not a BIOS issue.
View 1 Replies
View Related
Mar 1, 2011
I wouldnt be posting here because I like to solve my problems by myself but I just dont know what else to do. I want to go back to the ubuntu world and I tried Kubuntu. After Installing the Fglrx drivers after a fresh install (10.10 32 bits) through the restricted drivers it shows an ugly font ubuntu loading screen and after that the screen turns "off" (like if there was no signal, the "on/off" light flickers) and it stays like that, but I can use the Ctrl+alt+f1 console. Installing the drivers from ati webiste ends in the same result as before. Downloaded Ubunt 10.10 32 bit and installed it, same results. I have a Radeon HD 3300 integrated. I dont know what to do. The open source drivers works well, but there is no 1280x1024 resolution in the screen manage
View 2 Replies
View Related
Jan 8, 2011
after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies
View Related
Jan 19, 2010
I cant boot fedora, i have installed windows XP and Fedora 12, i can boot XP, but when i try to boot Fedora, it show me boot screen to choose Fedora and Other, when i click enter on Fedora, nothing happens, just black screen :S I tried with "acpi=off", and it doesn't work :/
View 2 Replies
View Related
Jun 16, 2010
Had Ubuntu installed, it worked fine but I had to format for a new partition (out of space) I program in Windows, I would consider myself a Windows geek, and would like to try out Linux. After I boot into setup, it stays at a black screen. It did that when I was installed Ubuntu, the first time. I don't know how exactly it ended up working, after a lot of different things I was able to get it to boot.
View 3 Replies
View Related
Jun 30, 2010
I have just installed the latest update for Ubuntu 10.04, however upon requested restart i now boot to a black screen. the boot sequence is system post, followed by the generic Purple UBUNTU loading screen, following that you just get a black screen.
AMD x64
4Gb RAM
120GB Intel SSD
ATI RAIDON 3650
View 7 Replies
View Related
Aug 16, 2010
I'm trying to update an older laptop for my nephew. It was running Hardy Heron (Ubuntu 8.04 LTS) successfully.
However, after installing a clean copy of Lucid Lynx (Ubuntu 10.04 LTS), the boot process halts almost immediately with a black screen. There is no blinking cursor and no hard-drive activity.
When I hold down the "Shift" key after the rebooting the computer, I'm able to edit the grub2 boot options.
When I remove the "quiet" boot option, I'm able to see about a page of text before the boot process halts and displays the black screen. Here is the last bit of text that appears just before the black screen:
Code:
...
Begin: Running /scripts/init-bottom ...
Done.
At this point, the font style changes slightly. Then the text is replaced by the solid black screen. There is no blinking cursor, and the hard drive activity ceases.
I've tried booting in rescue mode: This also halts at a solid black screen.
This is an older laptop: I had to boot the installation disc with the boot option "noapic" in order for the installation disc to run.
However, the installation seemed to run normally. I was able to finish installing the system. But, after removing the installer disc and rebooting, we were met with that solid black screen almost immediately after booting.
I used the minimal install disc: [URL]
I've verified the MD5 checksum for the disc image. And I've successfully used this same disc to install Ubuntu for my mother.
But my little nephew is left without a usable system.
Could we be missing a boot option?
View 1 Replies
View Related
Nov 3, 2010
I installed 10.10 of the live boot CD. It said everything went fine, now when I go to boot into Linux it just flashes the underscore on a black screen. What do I do from here?
View 1 Replies
View Related
