I want to install grub inside windows 7. I don't want to partition anything neither I want to remove Windows Boot Loader (BCD). I simply want to Use Grub from windows 7 boot menu. I want to do this so for frugal install of linux distros such as puppy, slitaz, etc. I have used WinGrub on Windows XP and it worked fine. But I don't think that will work on Windows 7.
View 1 RepliesI want to do the install inside windows mode, but I want to use all of the 104gb instead of only 30. This was the cause to another problem I recently had (running out of space). How do I install inside windows with all 104gb?
View 1 Replies View Relatedwhen i try to install ubuntu 10.04 inside windows xp from inside running windows XP by pop up windows screen which run automatically when i put CD into CD rom drive , I find message appear to me that the installer will download the iso file and take time (as downloading time ) although that I install the ubuntu 10.04 from official original CD that I got it via Post and its size about 699 mbs.
View 1 Replies View RelatedI have been using Wubi for a few weeks now and I am really impressed. I have endured a lot of problems with grub and kernel problems etc but now realise that its just the Wubi inside windows! I have it all set up with the cube to perfection and all drivers are running great after a bit of tweaking. So a bit of a lazy question really, can I install it properly onto my drive, and retain all the hard work I have put in setting it up? I have tried, but when it comes to selecting the drive that the Wubi is installed on it just says format with no backup option.
View 9 Replies View Relatedmessege pops up while trying to install inside windows?
View 1 Replies View RelatedI have downloaded Kubuntu 11.04 Desktop ISO. When I fire up Wubi then there is no Install inside Windows option! Why?
View 4 Replies View RelatedWill Mandriva run inside Windows 7?
View 1 Replies View RelatedI'm trying to install 10.10 but it keeps throwing an error. I'll include the error and log file below:
An error occurred: Permission Denied For more information, see the log file: c:...
I am trying to dual boot Windows and Linux. I would like to continue using the Windows bootloader in my MBR.
I installed Windows 7 first. During the install I left some unallocated space that I intended to install Linux.
I found this guide: [URL]
It says to install GRUB to the bootsector of the partition that Linux is being installed to and not the MBR of your hard drive.
I am trying to install Linux Mint Debian to the second partition. When the installer gets to where you are asked to install GRUB the only option is to install GRUB to /dev/sda which I believe is the MBR.
I decided just not to install GRUB and proceeded with the installation.
How can I install GRUB to the bootsector of my Linux partition?
I have a laptop with two partitions, dual booting Vista and Ubuntu. laptop was originally furnished with Vista. It's become totally unusable and I want to install XP on the NTFS partition erasing Vista. I know that after installing XP it will overwrite the MBR and GRUB will be lost. how to recover GRUB after the XP install. all data is now on the Ubuntu partition. I need XP just for games for my kids. barbie and harry potter ...
I spent 30min looking for sth like that but could not find it, just reference if such a thread exists.
When i tried to install windows xp and ubuntu 9.04 together i got an error as GRUB 18. Then i installed only ubuntu 9.04. Now i am planning to have both ubuntu 9.04 and fedora 12 on my system. Is it possible that i'll again get the same error? If yes what are the possible solutions?? and is it advisable to have both fedora and ubuntu in the same system??
View 10 Replies View RelatedTwo days ago i turned on my pc and suddenly there was a message:"Minimal Bash-like line editing is supported.For the first word,TAB lists possible command completions.Anywhere else TAB lists the possible completions of a device/filename.ESC any time exists...
When i googled this message it came out that this has got to do with linux (i have never used linux and i formated my disc once or twice since i bought it so i found it very strange that this problem is related to linux).Anyway,i found out that grub is the problem and that it isnt a big deal to solve it.I downloaded Ubuntu,booted it from the cd and followed the instructions...I typed in grub (in the terminal) and it told me to download it so i typed in "get-apt grub install" or something like that and it all went well,i was now in the grub directory.Then i typed " find /boot/grub/stage1" and it told me that the file was not found.
I have tried everything,i have downloaded the super rescue cd the fix the problem but i have still the same problem.
recently i installed ubuntu 10.10 and now when i start my computor i dont see windows xp in the grub bootloader anymore. (it worked fine for 10.04) my brother as well has had the same problem.
View 2 Replies View RelatedI know its not a Linux program but my brother had Linux on his HP DV9000 Laptop, Well he wants to go back to windows XP home edition or what ever, he played around with it and messed something up and when you boot it, it comes up with a GRUB error 22, so I try to boot it with the windows XP CD and when i try to install windows or repair it tells me there is no hard disk... which seems kinda stupid considering your PC needs a hard disk to boot up, so in the BIOS menu i did the hard disk testing and what not and it came back 100%...
View 14 Replies View RelatedI am using Lenovo Laptop. Initially I had Dual boot with Windows Vista and RHEL 5. I deleted Vista Partition. If I try to install Vista using Vista Bootable DVD, The Vista Bootable DVD is not getting detected! Now I want to remove everything (RHEL 5 & Grub Boot loader) from my laptop and install fresh OS.
View 14 Replies View RelatedI have installed Ubuntu and i am unable to open windows it says windows Grub missing re-install system32I don't want to lose data in windows please tell me how to install Grub(windows xp sp2)
View 7 Replies View RelatedI'm running Ubuntu 10.04 inside VMware Player running under Windows Vista and I can't connect to the internet or the host computer from the Ubuntu.
I have set all the VMware services to manual (like VMware DHCP Service), but starting them manually doesn't help.
In VMware, the network seems to work (there is a green dot beside the network icon) and I have tried both Bridged and NAT settings.
ifconfig doesn't show the eth1 interface, unless I give it as a parameter (or use -a). I think this means that Ubuntu thinks that the network isn't connected at all.
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
When you install inside windows it refers installation size???
View 2 Replies View Relatederror: unknown filesystem grub rescue>
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
I have installed these OS's in this order:
1 - Vista
2 - Ubuntu Server 9.04
3 - Ubuntu Desk 10.04
4 - BT4
I recently upgraded my most often used OS (#3) to 10.04 version and it updated GRUB to GRUB2 as part of the dist-upgrade. I have a feeling that I wasn't careful enough when installing BT4 or I made a mistake in the partitioning. I had plenty of space that was free waiting to be used by some other os and I designated some of that space for BT4.
When I got it all installed (off of a USB live boot) I rebooted and noticed it was back to grub one. The Vista install and the Ubuntu Server install both work still... but the recently updated (to Grub2) Ubuntu Desk install now hangs immediately after selecting it and pressing enter in Grub. I can mount the partition within BT4 just fine and see that all my data is still there, it just won't boot.
What I've tried Using BT4 to install Grub2. (no luck) Installing Grub1.5 back after finding Grub2 didn't work. (no luck) My plan When I get home from work today I'm going to take the "quiet" option off of the boot command in Grub for that Ubuntu OS and see if there's any error it's dumping before it hangs.
Hope that someone has had this issue before and can just tell me a straight forward way of resolving this issue. I'd prefer to use GRUB2 as my boot loader.
Cliff Notes Had other OS's installed Updated to newest Ubuntu (installed GRUB2 as the new bootloader)Used some spare disk to install BT4 New Ubuntu that used Grub2 is now the only OS that won't boot
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies View RelatedI virus got my XP installation this morning. I have to install it. When I install windows it will write over the GRUB and I will no longer be able to re-boot my openSusie OS. My question is After XP is installed is there a way to re-install GRUB without having to re-install openSusie 11.2?
View 9 Replies View RelatedWhen I installed Ubuntu, it created a folder called 'ubuntu' on my hard drive. Is there a way to recover my data from this folder and use it with a newer version of ubuntu. I can't access Ubuntu on my computer. It boots straight into Windows.
View 6 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
after I install windows the grub is gonei tried to do some thing and i follow the steps listed in this linkhttp://ubuntuforums.org/showthread.php?t=922678because it was very similar to my problem, i did every thing up to step #10 which issudo mount -o bind /dev /mnt/dev sudo mount -t proc none /mnt/proc sudo chroot /mnt apt-get install grub update-grub exit know when i reboot i became to grub screen ( grub> with no option. even my windows is gone I don't know what to do
View 9 Replies View RelatedWhether it is possible to install GRUB in windows to boot. Because I have installed one of the linux distro on USB. Now without the USB i am not able to boot windows.
View 1 Replies View Relatedim trying to shrink my vista partition with gparted inside ubuntu. I run gparted (and yes i have ntfsprogs) but when i select the ntfs partition and select move/resize it brings up free space preceding... new size... and free space following.so when i input the new size the resize/move button greys out and when i change the freespace following it just puts back my original new size and back and forth.from what i have read i need to run the gparted livecd and go from there. is this true? i know how to do it with diskpart in windows, how to in ubuntu and eventually get rid of windows.my system is 64-bit. [URL]
View 5 Replies View RelatedI have ubuntu 10.04 running inside windows and want to make it the proprietary OS. I have an acer aspire 5517, are there any problems associated with this laptop's hardware and ubuntu.
View 3 Replies View Related