The gnome also mixer keeps reverting to external amplifier checked. To get sound every day I have to open that and uncheck external amplifier. Is there a way to make that permanent? I have never used an ext amplifier and this started with Lucid install, Also under the edit menu and sound card properties it has ext amp checked and if I uncheck it , it won't save and goes right back to checked
View 1 RepliesI am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
how to save my settings in Gnome-Alsa mixer. Everytime I restart I have to go in and set everything Is there a save I'm missing?
View 7 Replies View RelatedI just did a reinstall of Debian testing last night, and today I am configuring the system to my liking. I just clicked on the mixer in the tray, and the only option I get is Realtek ALC269. Before I could use ALSA. What happened, and how can I get ALSA back?
I did an "apt-get install alsa" to see if I could even get ALSA, and it downloaded and installed. I still can't seem to get ALSA working down there.
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies View RelatedI've got an Acer 7736 and had quite a few issues with no sound after my install of 10.10. After quite a bit of fiddling I managed to get that sorted and I now how have sound. I believe I'm using alsa although pulse also does seem to be on here. The reason I say I believe I'm using alsa is that after startup, I have no sound on speakers unless I unmute it in alsamixer.
As I understand it alsa's supposed to save your settings on logout/shutdown/reboot but this doesn't appear to be the case, and I'm not able to find any asound.conf or the like in the places they're apparently supposed to be.
I have fedora 11 install Code: Linux root 2.6.29.4-167.fc11.i686.PAE #1 SMP Wed May 27 17:28:22 EDT 2009 i686 i686 i386 GNU/Linux But sound is not able to come for listening music ,which alsa driver should i install
View 3 Replies View RelatedI'm having an issue using MPD currently, using sonata as the front end. Quick specs are as follows:
Code: Fedora 13 x64 - Linux ltp01 2.6.34.8-68.fc13.x86_64 #1 SMP Thu Feb 17 15:03:58 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux MPD version - mpd (MPD: Music Player Daemon) 0.15.11 Here is my mpd.conf file contents: Code: # An example configuration file for MPD # See the mpd.conf man page for a more detailed description of each parameter.
[Code]...
I googled my issue, and didn't come up with much to help me. Any advice on this? It's not a completely pressing issue, but I would like to know what is going on and how I can fix this, since I never messed with MPD before in my life.
Im using Ubuntu 10.10 Alpha1. I plugged in a set of headphones, and it cut out my speakers. I know how to fix this in Alsa Mixer, but the command for it obviously isnt the same as Karmic.
I type Alsa Mixer, it says Usage: /sbin/alsa {unload|reload|force-unload|force-reload|suspend|resume}
Anyone know a way to open A.M. that it will.
ALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
View 3 Replies View RelatedI notice that each time I boot my computer, under the playback section of the ALSA Mixer the 'Speaker' volume control is turned all the way down. Even when I return it to the proper level, and then restart my computer later, the slider for 'Speaker' seems to default back to the previous state mentioned above. Is there a way to set the default for the ALSA mixer in a .conf file of some sort so that the default setting for 'Speaker' is always at max?
View 4 Replies View RelatedI just bought an HP Pavilion dv7-1273cl and it works excellent except for the sound and the webcam, the result for lspci is as follows:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Gnome volume control shows that HDA Intel(Alsa mixer) is selected and as a default the speaker is muted, if I unmute it, an infinite loop-like sound plays and no application seems to have access to the sound, I believe the correct module is installed by default, and the webcam does not work as well. I'm using debian squeeze i386.
After compileing my kernel i get no sound. I tried : alsaconf - choose my sound card - everything is all right, but when i try alsamixer i get : No mixer elems found
[Code]....
I recently upgraded from FC11 to FC14 by backing up /home, saving the output of "rpm -qa", repartitioning, installing FC14, restoring /home, re-running "rpm -qa" and installing packages that I had before.
But I noticed that the nice GUI mixer that I had before which could allow me separately muting the speakers (conneced to "front" jack) while leaving the signal to the headphone
jack is missing. I think it was an ALSA mixer but I'm not 100% sure. I downloaded alsa-driver-1.0.24.tar.bz2 but after
[Code]....
I found one error in my MPD log.
Code:
Apr 28 22:25 : can't find alsa mixer control "PCM"
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI basically accidentally installed gnome3 on ubuntu tweak (I didn't notice the box was checked) and next time I started up I could only use the gnome 3 environment which is massively buggy. I wish to revert back to 11.04 (without a clean install, since I have a lot of files I need to keep). I have tried purging the gnome3 team ppa but I get the following error:
"sudo ppa-purge ppa:gnome3-team/gnome3/
Updating packages lists
PPA to be removed: gnome3-team/gnome3 ppa
[code]....
How do I get mixer and dsp to appear in /dev? I can't use Lavrec without disabling audio.
View 1 Replies View RelatedI hear no login sound when I login to my ubuntu. I checked at startup applications and found GNOME login sound is enabled. The command used there is
Code:
/usr/bin/canberra-gtk-play --id="desktop-login" --description="GNOME Login"
.
Its not only this, but there is no other sounds enabled - for mouse clicks etc
I have connected the PC to an amplifier via optical cable. Everything was working fine. Suddenly, I lost sound! The last things I was doing was extracting some CDs by Sound Juicer and I installed a program named setcd. I thought it was the new software conflicting, so I uninstalled it. However, still no sound. I check the sound settings and find to be the same as before.
View 2 Replies View RelatedI'm having issues with soundI cannot view my sound card in Gnome Alsa. It is not muted. It does work I tried to remove myself from the audio group but it won't allow me to i am sudo what might be going wrong when i click the buttons they do nothing in users and groups menu
View 1 Replies View RelatedI have a DVD player that is for some reason outputting very quiet sound. I would like to wire the audio cable output end into the input of my Ubuntu laptop, then amplify the sound, and output it from the laptop to external speakers. What program will allow me to take inputted mic sound, and then echo it back at higher volume?
View 3 Replies View RelatedI am looking to make an outdoor sound system. The house and everything is already wired. The garage is 20' from the house in an L with a patio in between. I want to run a network cable out there and set an old P4 computer with Ubuntu and use Amarok to be able to play music and playlists on a set of outside speakers So, an suggestions for small amplifiers to run off a computer? Once up, I may try and experiment with those little USB wireless remote terminals, but that is a ways off.
View 1 Replies View RelatedEvince in non-gnome systems is unable to open external link. The error msg it shows is
Code:
Unable to open external link The specified location is not supported. I have already googled it, however it only says it is a bug, without any solution available. Evince in gnome systems however work just fine. Is there any way evince can use sensible-browser to open external links?
On my Fedora 14 system, the gnome-volume-control-applet manipulates the Front channel, rather than Master (or PCM), which means I continually have to use alsamixer in terminal to adjust the audio volume in the other channels.In earlier version of Gnome (pre-pulseaudio?), this could be configured in the volume control preferences, but no more.Anyone know how I can fix this?My audio adapter is pretty standard Intel stuff. lspci: ode:00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
View 1 Replies View RelatedI have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
I'm running Ubuntu 10.10 on a Zotac nettop. When I boot up normally, all my external USB drives are recognized and mounted properly in /media.
But when I boot up without Gnome (i.e. there's no monitor attached so Gnome doesn't start) they don't mount right: I see directories for them inside /media but normal users don't have access, and root only sees an empty directory.
disk drives are being checked for erros?
View 2 Replies View RelatedYesterday I tried to install some packages via synaptic manager and it rendered my system without GUI and without network so apt-get does not work to fix it.
I made a clone of my hard disk with dd a month ago and have daily backups of my data.
My hard disk in the laptop is a SSD. (sda) the external hard disk is an laptop hard disk connected via a USB IDE connector (sdb)
today my system booted from the sdb hard disk. Which was unexpected. I am updating the data on sdb now. the problem I have now is that I can not access sda. How am I supposed to mount it ? My plan was to overwrite sda with sdb
after shutting down, disconnection sdb, rebooting and connecting sdb again I tried
dd if=/dev/sdb of=/dev/sda bs=4096 conv=noerror, sync
then I get the message dd invalid conversion
I am using ATI HD3200 graphics card, and running Ubuntu 10.04 Lucid on a laptop. It have VGA port so I can attach external LCD monitor to the laptop. I am using fglrx driver.
My question is how should I configure the xorg.conf file so that when I attached external monitor, the GNOME menu bar (Applications, Places and System, etc) will be put on the external monitor instead of laptop LCD monitor.
I have checked varies web resource that saying you can drag and drop the GNOME menu bar to the new screen, it never worked. Someone also suggested to add new bar into the screen and GNOME will remember it, I can't even find the option to do that.