I have fedora 11 install Code: Linux root 2.6.29.4-167.fc11.i686.PAE #1 SMP Wed May 27 17:28:22 EDT 2009 i686 i686 i386 GNU/Linux But sound is not able to come for listening music ,which alsa driver should i install
View 3 RepliesI have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI just bought an HP Pavilion dv7-1273cl and it works excellent except for the sound and the webcam, the result for lspci is as follows:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Gnome volume control shows that HDA Intel(Alsa mixer) is selected and as a default the speaker is muted, if I unmute it, an infinite loop-like sound plays and no application seems to have access to the sound, I believe the correct module is installed by default, and the webcam does not work as well. I'm using debian squeeze i386.
I am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
Im using Ubuntu 10.10 Alpha1. I plugged in a set of headphones, and it cut out my speakers. I know how to fix this in Alsa Mixer, but the command for it obviously isnt the same as Karmic.
I type Alsa Mixer, it says Usage: /sbin/alsa {unload|reload|force-unload|force-reload|suspend|resume}
Anyone know a way to open A.M. that it will.
After compileing my kernel i get no sound. I tried : alsaconf - choose my sound card - everything is all right, but when i try alsamixer i get : No mixer elems found
[Code]....
how can I play audio (Mythtv - Play Music) simultaneously on two sound cards using ALSA drivers. I have two cards working well. One card is an onboard Intel cards, and the other card is a USB Audio card. Both cards are working well. I use the onboard Intel to output SPDIF to an amplified. The second USB card is bound to MPD service and it outputs an analog signal to a second amplified. I'd like to have the following configuration: Play to the default card with 5.1 passthrough, while the second card, connected to a second amplifier, plays an analog signal to the same audio played by Mythtv Play Music. In other words, I need to mix somehow and play the same audio on both cards.
Here is the list of cards:
root@mythtv:~# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
[code]...
I just did a reinstall of Debian testing last night, and today I am configuring the system to my liking. I just clicked on the mixer in the tray, and the only option I get is Realtek ALC269. Before I could use ALSA. What happened, and how can I get ALSA back?
I did an "apt-get install alsa" to see if I could even get ALSA, and it downloaded and installed. I still can't seem to get ALSA working down there.
how to save my settings in Gnome-Alsa mixer. Everytime I restart I have to go in and set everything Is there a save I'm missing?
View 7 Replies View RelatedI'm having an issue using MPD currently, using sonata as the front end. Quick specs are as follows:
Code: Fedora 13 x64 - Linux ltp01 2.6.34.8-68.fc13.x86_64 #1 SMP Thu Feb 17 15:03:58 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux MPD version - mpd (MPD: Music Player Daemon) 0.15.11 Here is my mpd.conf file contents: Code: # An example configuration file for MPD # See the mpd.conf man page for a more detailed description of each parameter.
[Code]...
I googled my issue, and didn't come up with much to help me. Any advice on this? It's not a completely pressing issue, but I would like to know what is going on and how I can fix this, since I never messed with MPD before in my life.
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies View RelatedI've got an Acer 7736 and had quite a few issues with no sound after my install of 10.10. After quite a bit of fiddling I managed to get that sorted and I now how have sound. I believe I'm using alsa although pulse also does seem to be on here. The reason I say I believe I'm using alsa is that after startup, I have no sound on speakers unless I unmute it in alsamixer.
As I understand it alsa's supposed to save your settings on logout/shutdown/reboot but this doesn't appear to be the case, and I'm not able to find any asound.conf or the like in the places they're apparently supposed to be.
The gnome also mixer keeps reverting to external amplifier checked. To get sound every day I have to open that and uncheck external amplifier. Is there a way to make that permanent? I have never used an ext amplifier and this started with Lucid install, Also under the edit menu and sound card properties it has ext amp checked and if I uncheck it , it won't save and goes right back to checked
View 1 Replies View RelatedALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
View 3 Replies View RelatedI notice that each time I boot my computer, under the playback section of the ALSA Mixer the 'Speaker' volume control is turned all the way down. Even when I return it to the proper level, and then restart my computer later, the slider for 'Speaker' seems to default back to the previous state mentioned above. Is there a way to set the default for the ALSA mixer in a .conf file of some sort so that the default setting for 'Speaker' is always at max?
View 4 Replies View RelatedI recently upgraded from FC11 to FC14 by backing up /home, saving the output of "rpm -qa", repartitioning, installing FC14, restoring /home, re-running "rpm -qa" and installing packages that I had before.
But I noticed that the nice GUI mixer that I had before which could allow me separately muting the speakers (conneced to "front" jack) while leaving the signal to the headphone
jack is missing. I think it was an ALSA mixer but I'm not 100% sure. I downloaded alsa-driver-1.0.24.tar.bz2 but after
[Code]....
I'm new to linux runing fedora 14 want to play mp3 and mpeg4 video formats is there an all in one player?
View 1 Replies View RelatedI installed Ubuntu using Wubi, and I'm liking it so far. However, I still have Windows 7 installed as my primary OS, and I have accumulated a large collection of music. However, I cannot listen to this music in my Ubuntu system, which is a shame. I'm almost certain I am simply missing something, though I would like to double-check and ensure I am wrong before going further. Is it possible to access my music from my Windows partition on my Ubuntu 10.04 LTS partition?
View 4 Replies View RelatedI have an audio source that I want to listen to through my PC speakers. My computer has both a mic(rophone) and a line-in audio connector. I am able to use the "gnome-sound-recorder 2.28.1" under Karmic Koala to record from these sources and then I can play back the sound.
However, I'm more interested in listening to the audio then recording. Though, recording would be nice if it where available too. Using Rhythembox Music Player, Movie Player and Audacious2 I am able to play CD(s), Pod Cast feeds, Files and possibly other sources I'm not seeing anything to handle hard wired input to my sound card as an option.
Do I need to open a device as a source? Do I need an extension to one of these players?
I found one error in my MPD log.
Code:
Apr 28 22:25 : can't find alsa mixer control "PCM"
I have no sound after upgrading to 11.04. Sound control panel and test speakers emits no sound. The new music player won't play sounds from music CDs either.
ALSA info is at: [url]
So I want to be able to listen to sound coming in on the line in port. The sound does work as I have tested with Gnome sound recorder. However, I would like to be able to hear it all the time. I don't want to have to record to be able to hear it. Is there a way to mix the line input sound with the normal system sounds? This is so I can run sound from my Xbox 360 into my computer. I currently use a audio splitter but I get problems with volume levels due to voltage changes going to the speakers.
View 3 Replies View RelatedI'm trying to configure PulseAudio using the official guide and can't get past the first step where it tells me to input pulseaudio -nC.
1. How can I get into the PA console/daemon to use the official guide
2.If I can't get PA setup correctly, is there an ALSA sound mixer I can use to modify sound levels for various running applications.
2B. Is there a sound mixer that works with OSS applications as well? Most apps these days are ALSA, but some older ones (like Wolfenstein Enemy Territory) use OSS.
Using Kubuntu 10.04 here
I've been trying to make my microphone work and so I've pretty much messed around with the mixer (KMixer), mainly adding channels to the "equalizer" and checking and clearing "capture" boxes. After I did that my sound "disappeared" - I have no sound whatsoever (not even Kubuntu's initialization sound).
How can I fix this? Is it possible to go back to the "default" configuration?
How do I get mixer and dsp to appear in /dev? I can't use Lavrec without disabling audio.
View 1 Replies View RelatedI know I can use alsamixer in a terminal to adjust the sound for various input/outputs. But when I launch the alsamixergui, I only get Master Volume for Pulse Audio, which does me no good (Experienced the audio bug described in this ..... video [URL] how can I change the sound card in the Gui Mixer (S and F6 does nothing).
View 1 Replies View RelatedIs there any program like virtual dj 7?
View 2 Replies View RelatedI have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
i am using ubuntu10.04 , the sound is distorted booth on playing cds or listening to radio online . it sounds like a record where the speed keeps changing
View 1 Replies View Related