Hardware :: Alsa: Set Gnome-volume-control-applet To Master Channel?
Nov 6, 2010
On my Fedora 14 system, the gnome-volume-control-applet manipulates the Front channel, rather than Master (or PCM), which means I continually have to use alsamixer in terminal to adjust the audio volume in the other channels.In earlier version of Gnome (pre-pulseaudio?), this could be configured in the volume control preferences, but no more.Anyone know how I can fix this?My audio adapter is pretty standard Intel stuff. lspci: ode:00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
View 1 Replies
ADVERTISEMENT
Mar 7, 2011
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
View 1 Replies
View Related
Jul 17, 2010
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
View 1 Replies
View Related
May 26, 2010
How do i change the channel gnome-volume-control controls? I want it to control pcm but it controls master front. There used to be a setting right in the sound preferences but i think it disappeared with the 9.10 upgrade or at least i can not find it anymore. I've looked on the at gnome alsa mixer while changing the volume and master front gets controlled while pcm is always set to max. The problem with this is that master front does almost nothing to change the actual volume.
If i control pcm with the alsa mixer the volume range is fine. I've found a manual for gnome-volume-control on [URL].en and the pic there actually looks like i remember it looking. But i can not get to that screen. What i have looks completely different. Its a window with the tabs Sound Effects | Hardware | Input | Output | Applications. But there is no sight of any channel settings and the only slider there does the same as the applet one.
View 9 Replies
View Related
Jun 13, 2010
I'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.
View 2 Replies
View Related
Apr 10, 2011
My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
View 3 Replies
View Related
May 25, 2010
I think my question os quite silly, but yet, I can't figure out how to fix it. I had Debian Lenny installed on my laptop. While in Debian, i could control the volume of laptop speakers and headphone in separate channels. So, i could, for example, play a music in laptop speakers and in headphone, at same time.
In April, I've migrate to Kubuntu 10.04. I cannot do it any longer! There are no two separate channels in KMix. Everytime I plug headphone, it redirect the audio output from speakers to heaphone, and when i take the headphone out, it puts taudio output back to speakers. How can I control volume of each channel manually in Kubuntu 10.04?
View 1 Replies
View Related
Oct 9, 2010
I've just removed PulseAudio and installed Envy24Control in order to make sound working with my M-Audio Delta 1010LT, it's working fine now, but the only problem is that the master volume control disappeared, and the buttons on my keyboard (volume + and volume -) are not working (with PulseAudio they were fine). Using Ubuntu 10.10
View 3 Replies
View Related
Apr 7, 2010
My internal mic on sony vaio was not working on karmic 64bit. After I followed these instructions [URL] (updated alsa to 1.0.22) I got the microphone working, but now mplayer does not play any sound (although it plays files), as it tries to use pulse by default. However when run with -ao alsa, it works fine.
Other than that, the volume control has not effect on the sound, so every time I need to control it using alsamix.
When I remove pulseaudio, everything seems to be working, except gnome-volume-control and gnome-volume-control-applet do not start, and the keyboard volume controls dont work.
Here are the sound cards I have:
Code:
progre55@progre55:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
[Code]....
View 3 Replies
View Related
Nov 25, 2009
I have 5.1-speaker set, confed succesfully with alsa. alsamixer -c 0 -command shows volume of all the speakers I want to set up. My problem is, when I have alsamixer open and change main volume from gnome-panel (it's called pavucontrol for me, pulseaudio?) it "resets" all speakers to max (100%). Only master volume changes like planned. For example, if I have front speakers set to 50%, center to 75%, surround to 100%, subwoofer to 40%, when changing volume from gnome's panel it only changes master volume, and puts every other speaker to max. How to prevent this? Do you have any clue? I had not any problems with this in openSUSE 11.1. Alt+F2 not working with Emerald decorator Screens go black after 10 minutes or so in openSUSE 11.2
View 5 Replies
View Related
Jan 17, 2010
I had to remove Pulse Audio to get my sound working in X-Plane. After installing ALSA, sounds perfect, no complaints. One side effect is that now my Logitech keyboard volume controls don't work, and I no longer have that nifty tray icon. Can I fix this, and install a tray icon for ALSA? Also my Sound link says, "waiting for sound to respond" when clicking System>Preferences>Sound, can I fix/remove this?
View 4 Replies
View Related
Jun 12, 2010
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
View 6 Replies
View Related
Jun 25, 2010
Alright, at first, the volume control went missing from the indicator applet, but then re-adding it to the panel didn't do anything but add a mail/chat applet. So I tried to reset the indicator applet settings with this code...
And now all that happens when I add the indicator applet to the panel is that the text: "No indicators" pops up where the mail/chat applet was before. Is there a way to get the volume applet back into the panel?
View 3 Replies
View Related
Jan 5, 2011
My microphone wasn't working so I entered alsamixer to amp up it's volume and see what's wrong.Not sure what I did wrong but now the gnome volume control applet in the Indicator does not affect system volume at all.I can even mute it and it will not mute anything.The volume controls in alsamixer work fine and changing the volume in alsamixer affect system volume immediately.What could I have done? How can I get back volume control inside gnome?
View 2 Replies
View Related
Nov 14, 2009
I normally run KDE, but installed GNOME as well on my netbook (running openSUSE 11.2) to try out. However, I noticed there is no longer any volume control applet. The GNOME panel control is labeled 'deprecated', and the volue Fn keys, which work fine in KDE, do not work at all. I tried launching the PulseAudio Volume Control app, but it gives me a "Connection Failed: Connection Refused error". I still have sound, and I can adjust the volumes in alsamixer, but is rather inconvinient. What is the "right way" to adjust volumes in 11.2's GNOME?
View 9 Replies
View Related
Oct 29, 2009
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update.
I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
View 7 Replies
View Related
May 25, 2010
I use alsa, and I don't have a volume control applet on my Gnome Panel.When I right click and select "add to panel", there is nothing that has to do with "sound", "audio" or "volume" in the list, and the "Indicator Applet" or "Indicator Applet Session" things have no volume controls, or properties that would let you enable any sort of volume control.
How can I get a volume control in Ubuntu, so I don't have to run aumix in a terminal or something? I've got the thing working now. But does anyone know why the new, fancy "Indicator Applet" volume control doesn't appear? The Gnome Volume Control Applet isn't as nicely featured, although it actually works.
I've been using Linux since Redhat 5, it's beyond me why these sorts of problems are still around. Someone should just put a damn "Volume Control" element in the list of things to add to the panel, even if it doesn't work, perhaps showing an error message.
View 5 Replies
View Related
Feb 21, 2010
On accident I removed the volume control from the top panel, and when I go back to the panel and click add panel there is no volume control there. Also I use uTorrent in win and the utorrent logo use to go into the panel, but now it loads in a separate window label wine system tray. I have searched around and have not found a fix for this.
View 9 Replies
View Related
May 4, 2010
i get this error brand new lynx installation when i try gnome-volume-control from the command line,
i get this error
Code:
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
what could be the problem?
View 1 Replies
View Related
Nov 12, 2010
I would like to know how i get the button that let you change the volume that use to be available to add to the panel in some older versions of Ubuntu. If theres something else out there that can do the same and is added to the panel then please do tell.
View 1 Replies
View Related
Jan 11, 2010
I tried upgrading to Rhythmbox 0.12 and in the process something messed up my sound. When i try and start the volume control panel via terminal i get this error:
Quote:
gnome-volume-control: symbol lookup error: gnome-volume-control: undefined symbol: __gst_debug_min
I have googled but havent turned up much success. Also in the same breath, whenever i log out and log back in or even reboot my machine i get this error:
Quote:
The panel encountered a problem while loading "OAFIID:GNOME_MixerApplet". Do you want to delete the applet from your configuration?
I have tried reinstalling gnome applets and ubuntu desktop but the error still persists.
View 2 Replies
View Related
May 19, 2010
My challenge today is a broken sound mixer in gnome. Yesterday I run 'yum update' and it installed about 200 updates. This morning I rebooted, when double-clicking the 'speaker' icon in the top right corner of my gnome and I got a "crash".
(I have to go to mixer and enable 'front speakers' before I get any sound - thats something else i'd like to fix one day) Here is what bug-buddy has to say:
Distribution: CentOS release 5.5 (Final)
Gnome Release: 2.16.0 2007-02-18 (CentOS)
BugBuddy Version: 2.16.0
Memory status: size: 265785344 vsize: 265785344 resident: 10158080 share: 7
[Code]...
Any advice would be great - i think I should start by reinstalling the gnome mixer, but not sure which 'yum' that is contained in. I did do some reading about rolling back, but I read that is by default disabled!! Arh! why! only when you broke something you realise you need to turn it on.... o well hey ho.
View 11 Replies
View Related
Feb 16, 2010
I installed an Asus P7P55D PRO motherboard and now I can't mute Master channel with alsamixer, even not using KDE mixer. Probably ALSA doesn't support properly, despite I upgraded alsa libraries (alsa-lib-1.0.21a). The key to increase or decrease the volume through keyboard works fine, but the key for mute is not working. These are the alsamixer values:
Card: HDA Intel
Chip: VIA ID 444
I also used alsaconf command and it detects a snd-hda-intel board. I have a G15 keyboard and I even tried to make a shortcut with KDE mixer, but it doesn't work. Is there any way to solve it or have I to wait for a new version of alsa? I use Slackware64 13.0 with kernel 2.6.32.7.
View 8 Replies
View Related
Jan 16, 2010
installed F12 and noticed that the volume control applet is now all Pulseaudio rubbish, not Alsa like gmixer used to be. So now I don't seem to be able to mute my speakers when I'm using my headset, which in F10 I could do by just muting LFE/Center.Note I don't want the speakers to be disabled when I have the headphones plugged in (like Jack does) I just want to be able to control volume of the mixer channels individually - as sometimes I'll be playing music through the speakers and will receive a Skype call and want to mute the music, but also don't want the Skype sound coming out of the speakers - just the headphones.
I've tried setting up 4.1+input, 5.1+input, 4.0+input etc; but for some reason, even though the PulseAudio mixer thing has 5 individual sliders, they do nothing as they "jump" back to 100% when you slide them - even with the channels unlocked. gmixer and alsamixer do the job, but pulseaudio is the applet and only seems to control the master volume, not the individual channels. Any ideas - or perhaps a way to make gnome-volume-control revert back to actually being gmixer?
View 5 Replies
View Related
Aug 3, 2010
The volume control in the Gnome panel system tray has disappeared from my wife's Ubuntu 10.04 system with the master volume set to zero.I was able to restore sound via System->Preferences->Sound master volume, but this is not particularly convienent. How do I restore the panel volume control? (the speaker icon on the panel, between the Network arrows and Chat/Mail setup icons).
View 3 Replies
View Related
Jan 7, 2010
I'm running Ubuntu 9.04 and I've just gotten round to updating the sound. The ALSA built in is too old to have support for the X-Fi chip used in the Forte so I built and installed ALSA 10.0.22.1. On reboot, it detects the card as X-Fi Titanium series (as expected), but when I run the test
Code:
speaker-test -D surround51 -c6 -twav I only get output from Center, Rear Left, Rear Right and LFE - i.e. the front channel is missing. I'm not sure if there are any ALSA configuration files left lying around from my old sound card (Intel HDA audio) and I've forgotton what they might be called or where they would be.
Can someone tell me the locations of the various ALSA configuration files? Or is this a known thing about the Forte? (Maybe the card has the front two channels wired differently or something) Or maybe there's a configuration option I've missed.
View 3 Replies
View Related
Jan 5, 2011
I am having an intel machine with linux' redhat 5.4 distro. It's superb when it comes to server making and other admin. kind of stuffs but it fails when it comes to multimedia for i am unable to configure the sound file (asound.rc), i tried various codes but it only gives sound output on 2 front speakers. i want to activate other two rear speakers and the center one as well. this is my card info Multimedia audio controller: VIA Technologies, Inc. VT8237 AC97 Audio Controller
this is what my sound files have
/etc/asound.conf --------
#Generated by system-config-soundcard, do not edit by hand
#SWCONF
#DEV 0
defaults.pcm.card 1
[Code]...
View 1 Replies
View Related
Jul 15, 2009
I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
View 1 Replies
View Related
Sep 9, 2010
I'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
View 3 Replies
View Related
Oct 31, 2010
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies
View Related
