I'm having an issue using MPD currently, using sonata as the front end. Quick specs are as follows:
Code: Fedora 13 x64 - Linux ltp01 2.6.34.8-68.fc13.x86_64 #1 SMP Thu Feb 17 15:03:58 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux MPD version - mpd (MPD: Music Player Daemon) 0.15.11 Here is my mpd.conf file contents: Code: # An example configuration file for MPD # See the mpd.conf man page for a more detailed description of each parameter.
[Code]...
I googled my issue, and didn't come up with much to help me. Any advice on this? It's not a completely pressing issue, but I would like to know what is going on and how I can fix this, since I never messed with MPD before in my life.
I am attempting to record my microphone input using ffmpeg / alsa but always receive the following error:
[code]...
Using arecord works perfectly with hw:0,0. I had also tried to use /dev/snd/hwC0D0 as input but I receive an error from alsa saying that it doesn't exist (despite it existing and having adequate permissions). I know absolutely nothing about hardware but am comfortable around the command line
I just did a reinstall of Debian testing last night, and today I am configuring the system to my liking. I just clicked on the mixer in the tray, and the only option I get is Realtek ALC269. Before I could use ALSA. What happened, and how can I get ALSA back?
I did an "apt-get install alsa" to see if I could even get ALSA, and it downloaded and installed. I still can't seem to get ALSA working down there.
I have fedora 11 install Code: Linux root 2.6.29.4-167.fc11.i686.PAE #1 SMP Wed May 27 17:28:22 EDT 2009 i686 i686 i386 GNU/Linux But sound is not able to come for listening music ,which alsa driver should i install
Today went from jaunty to koala then to lucid. The package manager doesnt work nothing works in terminal for apt-get or anything getting the message ---->
Quote:Error benchmarking: helper exited with exit code 1: Error reading 27099136 bytes at 2509258752 from /dev/sda: Input/output errorthis issue is also preventing me from making a copy/backup of the partition with gpartedwhich i decided i should do since i had a scare when booting todayunable to mount / i said fix itthen it said /var was not readyi waited it became readyi am running 10.04.2 would upgrading the kernel to get trim support fix it?
Code: sudo fsck -t ext4 /dev/sda1 fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) System: clean, 247383/983040 files, 1394162/3907803 blocks Solution: drive is under warranty and it needs to be used this is not software problem
I just bought an HP Pavilion dv7-1273cl and it works excellent except for the sound and the webcam, the result for lspci is as follows:
lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Gnome volume control shows that HDA Intel(Alsa mixer) is selected and as a default the speaker is muted, if I unmute it, an infinite loop-like sound plays and no application seems to have access to the sound, I believe the correct module is installed by default, and the webcam does not work as well. I'm using debian squeeze i386.
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
I've got an Acer 7736 and had quite a few issues with no sound after my install of 10.10. After quite a bit of fiddling I managed to get that sorted and I now how have sound. I believe I'm using alsa although pulse also does seem to be on here. The reason I say I believe I'm using alsa is that after startup, I have no sound on speakers unless I unmute it in alsamixer.
As I understand it alsa's supposed to save your settings on logout/shutdown/reboot but this doesn't appear to be the case, and I'm not able to find any asound.conf or the like in the places they're apparently supposed to be.
I am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
My dad is out of town for a while, so I've been using his computer to rip my DVDs with Handbrake. He has Windows Vista installed, so I did a full installation of Fedora 13 on a thumb drive and just run everything off of that. However, when I went to delete some of the encoded videos after I had moved them to my computer, I got a system error that said 'can't delete files: I/O error.' Now, if I try to boot up Windows, his computer is stuck on a black screen checking a bunch of dlls. He'll be back in a couple of weeks, so I'd like to have it fixed by then.
I have dir in my HD that is very important to me,but when I try cd commad to go in the dirI got this message:cannot access `./Lab': Input/output erroralso when use ls to view the currently dir and the other dir's also I got this message:"ls: cannot access Lab: Input/output errorLab"with touch:touch: cannot touch `Lab': Input/output errorwith mkdir:mkdir: cannot create directory `Lab': Input/output error
We are running an C++ application in AWS EC2 instance (CentOS 5.4) mounted with an EBS Volume (say /mymountpoint). We do more simultaneous writes to the EBS Volume from our application. But at some point we get 'ERROR: Input/output error'. After this, 'ls -l /mymountpoint' command itself fails with the i/o error. The filesystem which we use for the EBS Volume is xfs. I unmounted the drive and done xfs_check and again mounted the drive. Now, everything seems to be working fine. But the issue still persists everytime when we do simultaneous writes.
I believe the following details will be useful, [root@domU-12-31-39-07-81-36 StoreGrid]# cat /etc/redhat-release CentOS release 5.4 (Final) .....
Output of dmesg : SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem Filesystem "sdh": Disabling barriers, not supported by the underlying device XFS mounting filesystem sdh Ending clean XFS mount for filesystem: sdh ..... Starting XFS recovery on filesystem: sdh (logdev: internal) Ending XFS recovery on filesystem: sdh (logdev: internal) The XFS utilities are in v2.9.4
The gnome also mixer keeps reverting to external amplifier checked. To get sound every day I have to open that and uncheck external amplifier. Is there a way to make that permanent? I have never used an ext amplifier and this started with Lucid install, Also under the edit menu and sound card properties it has ext amp checked and if I uncheck it , it won't save and goes right back to checked
Im using Ubuntu 10.10 Alpha1. I plugged in a set of headphones, and it cut out my speakers. I know how to fix this in Alsa Mixer, but the command for it obviously isnt the same as Karmic.
I type Alsa Mixer, it says Usage: /sbin/alsa {unload|reload|force-unload|force-reload|suspend|resume}
ALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
I notice that each time I boot my computer, under the playback section of the ALSA Mixer the 'Speaker' volume control is turned all the way down. Even when I return it to the proper level, and then restart my computer later, the slider for 'Speaker' seems to default back to the previous state mentioned above. Is there a way to set the default for the ALSA mixer in a .conf file of some sort so that the default setting for 'Speaker' is always at max?
After compileing my kernel i get no sound. I tried : alsaconf - choose my sound card - everything is all right, but when i try alsamixer i get : No mixer elems found
I recently upgraded from FC11 to FC14 by backing up /home, saving the output of "rpm -qa", repartitioning, installing FC14, restoring /home, re-running "rpm -qa" and installing packages that I had before.
But I noticed that the nice GUI mixer that I had before which could allow me separately muting the speakers (conneced to "front" jack) while leaving the signal to the headphone jack is missing. I think it was an ALSA mixer but I'm not 100% sure. I downloaded alsa-driver-1.0.24.tar.bz2 but after
I even threw some video DVDs at it to make sure it wasn't the disc.
Code:
[pickens@acer1 Videos]$ dd if=/dev/sr0 of=POTC.iso dd: reading `/dev/sr0': Input/output error 5088+0 records in
[code]....
I am getting the same thing on my laptop running Mandriva, oddly enough. Two different drives, two different computers, two different distros and multiple DVDs.
When running rsnapshot tonight it failed with a bunch of
cannot remove `file': Input/output error
errors.
I navigated to the directory and tried to delete it manually and I got the same errors. I tried with 'sudo rm directory'. How else can I delete this directory? What would cause a situation like this?
I'm either missing the obvious or have four identically defective tape drives. Each is a Seagate or IBM Travan drive (yes, I know they're old and I need to access the data; they were in Win boxes) using QIC-80/DC-2120 media. I've been trying to solve this using three Fedora boxes (different versions) and one Debian machine.
The OS's recognize the drives and they show up as /dev/st0.
With no media in the drives, I get a status report; with media inserted, I get the same input/output errors.
Examples (all as root):
With tape inserted:
With no tape in drive:
With tape inserted
Everything I've found on Google suggests that the drives are defective.
I wish to know what could be the possible cases for this error:cp: reading `filename': Input/output errorI am getting this message when I am trying to copy a big file of around 50MB.
I use the growisofs command from the terminal to do most of my burning. Mostly because i burn almost the exact same type of file every time so its pretty easy to set up. I've done this dozens of times and never once had a problem before. I loved it because it was so much simpler than doing this in windows where i would need to install a few extra programs and codecs. That was up until today where it started failing every single time i tried to burn something.
For some reason every time i try to burn a disc it gives me this error message:
Code:
I'm really at a loss as to why this is happening. Every thread i found that discussed this problem was mostly focused on k3b or brasero and never really answered the question. As far as i know nothing has been updated since the last time i burned a disc a few days ago. Everything is exactly the same as it was when it worked. The only thing i could think of that might have caused this sudden failure is that i flashed the firmware of another cd drive using the same sata port that this drive is currently plugged into, but that was in windows so i dont see how it could have affected this drive.
