Im using Ubuntu 10.10 Alpha1. I plugged in a set of headphones, and it cut out my speakers. I know how to fix this in Alsa Mixer, but the command for it obviously isnt the same as Karmic.
I type Alsa Mixer, it says Usage: /sbin/alsa {unload|reload|force-unload|force-reload|suspend|resume}
Anyone know a way to open A.M. that it will.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
I have fedora 11 install Code: Linux root 2.6.29.4-167.fc11.i686.PAE #1 SMP Wed May 27 17:28:22 EDT 2009 i686 i686 i386 GNU/Linux But sound is not able to come for listening music ,which alsa driver should i install
View 3 Replies View RelatedI just bought an HP Pavilion dv7-1273cl and it works excellent except for the sound and the webcam, the result for lspci is as follows:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Gnome volume control shows that HDA Intel(Alsa mixer) is selected and as a default the speaker is muted, if I unmute it, an infinite loop-like sound plays and no application seems to have access to the sound, I believe the correct module is installed by default, and the webcam does not work as well. I'm using debian squeeze i386.
After compileing my kernel i get no sound. I tried : alsaconf - choose my sound card - everything is all right, but when i try alsamixer i get : No mixer elems found
[Code]....
how to save my settings in Gnome-Alsa mixer. Everytime I restart I have to go in and set everything Is there a save I'm missing?
View 7 Replies View RelatedI used to watch and record TV in Vista and Win7 with a SAA7134 capture card, and all worked fine. Using TVTime in Ubuntu 10.10 64bit (no upgrade but fresh install, everything up-to-date), I get picture but no sound. Instead I get this error message when running TVTime from the terminal: Can't open device /dev/mixer, mixer volume and mute unavailable.Using lspci in terminal lists the card as following:
Code:
02:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
And dmesg outputs this:
Code:
[ 16.078404] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 16.078458] alloc irq_desc for 17 on node -1
[ 16.078460] alloc kstat_irqs on node -1[code]....
Being rather new to Linux (oh great, another newbie ) I don't know what additional info you might need, but I'm more than happy to post everything neededd - provided you tell me how to get that info.
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies View RelatedALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
View 3 Replies View RelatedI notice that each time I boot my computer, under the playback section of the ALSA Mixer the 'Speaker' volume control is turned all the way down. Even when I return it to the proper level, and then restart my computer later, the slider for 'Speaker' seems to default back to the previous state mentioned above. Is there a way to set the default for the ALSA mixer in a .conf file of some sort so that the default setting for 'Speaker' is always at max?
View 4 Replies View RelatedUsing Kubuntu 10.04 here
I've been trying to make my microphone work and so I've pretty much messed around with the mixer (KMixer), mainly adding channels to the "equalizer" and checking and clearing "capture" boxes. After I did that my sound "disappeared" - I have no sound whatsoever (not even Kubuntu's initialization sound).
How can I fix this? Is it possible to go back to the "default" configuration?
Is there any program like virtual dj 7?
View 2 Replies View RelatedI have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
How do I get mixer and dsp to appear in /dev? I can't use Lavrec without disabling audio.
View 1 Replies View RelatedI'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
I just did a reinstall of Debian testing last night, and today I am configuring the system to my liking. I just clicked on the mixer in the tray, and the only option I get is Realtek ALC269. Before I could use ALSA. What happened, and how can I get ALSA back?
I did an "apt-get install alsa" to see if I could even get ALSA, and it downloaded and installed. I still can't seem to get ALSA working down there.
I've got an Acer 7736 and had quite a few issues with no sound after my install of 10.10. After quite a bit of fiddling I managed to get that sorted and I now how have sound. I believe I'm using alsa although pulse also does seem to be on here. The reason I say I believe I'm using alsa is that after startup, I have no sound on speakers unless I unmute it in alsamixer.
As I understand it alsa's supposed to save your settings on logout/shutdown/reboot but this doesn't appear to be the case, and I'm not able to find any asound.conf or the like in the places they're apparently supposed to be.
I'm having an issue using MPD currently, using sonata as the front end. Quick specs are as follows:
Code: Fedora 13 x64 - Linux ltp01 2.6.34.8-68.fc13.x86_64 #1 SMP Thu Feb 17 15:03:58 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux MPD version - mpd (MPD: Music Player Daemon) 0.15.11 Here is my mpd.conf file contents: Code: # An example configuration file for MPD # See the mpd.conf man page for a more detailed description of each parameter.
[Code]...
I googled my issue, and didn't come up with much to help me. Any advice on this? It's not a completely pressing issue, but I would like to know what is going on and how I can fix this, since I never messed with MPD before in my life.
The gnome also mixer keeps reverting to external amplifier checked. To get sound every day I have to open that and uncheck external amplifier. Is there a way to make that permanent? I have never used an ext amplifier and this started with Lucid install, Also under the edit menu and sound card properties it has ext amp checked and if I uncheck it , it won't save and goes right back to checked
View 1 Replies View RelatedI recently upgraded from FC11 to FC14 by backing up /home, saving the output of "rpm -qa", repartitioning, installing FC14, restoring /home, re-running "rpm -qa" and installing packages that I had before.
But I noticed that the nice GUI mixer that I had before which could allow me separately muting the speakers (conneced to "front" jack) while leaving the signal to the headphone
jack is missing. I think it was an ALSA mixer but I'm not 100% sure. I downloaded alsa-driver-1.0.24.tar.bz2 but after
[Code]....
After trying to unsuccessfully install OSS4, it seems I've broken ALSA and have no sound. I've uninstalled the oss4 packages and rebooted, and now alsamixer reports "cannot open mixer: no such file or directory". Here's the output of aplay -l: List of PLAYBACK Hardware Devices aplay: device_list:244: snd_ctl_pcm_next_device PulseAudio also doesn't find any hardware devices, though it is able to play to the Apple Airport Express down the hall. I'm running 10.04 64-bit on a Thinkpad X61.
View 1 Replies View RelatedI have Ubuntu Lucid. If i dont' mistake, it should be possible to hear several applications playing sound simultaneously, with ALSA. But if 1 app is already playing, then starting a second one give always "device is busy".
View 2 Replies View RelatedI recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
I was having a problem with ALSA, installed OSS, but now nothing works. I want to remove OSS, and reinstall ALSA. I am thinking about reinstalling, but I have all my stuff on here, so don't really want to.
View 4 Replies View RelatedSo i upgraded to 10.04 a few months ago, right after it was released. clean install. it worked perfectly out of the box, or so it seemed. I had had sound problems in 9.10 that i didn't experience after i upgraded... until i tried to use some headphones a few days ago. when i connected the headphones, the speakers wouldn't mute. i thought it was no big deal. i had the same issue in 9.10 and it was fixed after i upgraded alsa. i figured i'd try the same thing. I used the same alsa upgrade script i used last time [URL] and it fixed the jack sensing and the sound worked perfectly... for about 5 minutes. after a short while of playing audio, sound would stop playing. i'd stop getting sound from video files, audio files, and even from my browser. i'd have to reboot to get sound again... only to lose it again in about 10 minutes. Now it's regressed to the point where i have no sound even after i reboot.
weird thing is, when i test out an audio file with aplay, it works... even if i just get garbage sound from some mp3 files.
anyway, i've got an HP dv7 and this is my aplay -l output
Code:
sleepee@sleepee-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
[Code].....
after installing alsa package, i have no sound.
View 1 Replies View RelatedI've no problems with sound on my laptop - it all works fine but Flash produces no sound at all.
I've got the Pulse audio applet running and when I'm using Rhythmbox it shows that on the playback tab and you can see the signal on the signal bar.
Viewing Flash videos shows the ALSA Plugin but shows no signal on the signal bar.
At least, I think it was the update that broke it. Anyway, my sound was working fine yesterday. I have gone through this thread to try and fix my sound, and it appears that my sound card has been uninstalled.
Step 1. aplay -l
Code:
aplay: device_list:235: no soundcards found...
Step 2. lspci -v
Code:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device 5770
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp .....
Code:
sudo modprobe snd-intel8x0
WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it will be ignored in a future release.
FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.31-22-generic/kernel/sound/pci/snd-intel8x0.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Last time my sound wasn't working, I was directed to this thread. The script from this thread might work again, but if it will just be erased after every update, I'd like something a bit more permanent.
the sound stops while playing music or movies and can't be restartet. I already upgraded alsa to 1.0.24.2. I managed to fix the problem somehow after hours of deinstalling and reinstalling alsa and trying loads of things, but I did not really find the cause of the problem.
View 5 Replies View Related
