New to Ubuntu. I've read all I can about the current mic issues with the Lucid 10.04 release. There does not seem to be any specific threads dealing with the GM45 chipset. I've had sound out of speakers on fresh install, and have done every single line addition (individually) suggested with:
[Code].....
Perhaps someone has run across this problem I loaded CentOS 5.3 on an AOpen MP45-BDR workstation. It uses the Mobile Intel 4 Series Express Chipset for the video graphics. It is officially identified as: GM45 chipset (Intel GMA X4500 MHD).
There are two problems. Using the "intel" video driver, the X11 server does not appear to support digital video cable (DVI interface). It is also stuck in 1024x768 resolution and I want it to display in 1280x1024 resolution. Using a DVI cable, the system boots and displays properly (GRUB and boot messages) until the X11 server starts, then the signal is lost. The system is configured with a dual boot (Windows XP Pro) and Windows operates properly and supports all of the features of the video graphics chipset (DVI and full resolution). So the hardware is ok.
The "intel" video driver has a description of "Experimental ..." so maybe there is an update to this driver or a replacement driver that supports this chipset. I checked the buglist and found CentOS bug ID 2951 which is somewhat similar. The user was utilizing the "intel" video driver and it locked his system but changing the driver to i810 was a work-around. My system does not lock. I did try the i810 video driver but the X server did not like it - it would not start. This makes sense since the description of this driver specifies support for the older Intel onboard chipsets.
[Code]...
1. Sometimes when I try to shutdown my computer the display becomes filled with pixels of different colors as shown in the image (The problem is very random so I was not able to take a photo, I tried to recreate the effect using GIMP). Then the display turns off (Analog power saving mode) But my system never turns off.
2. While working on my computer the display sometimes goes kaput and blinks as in the second image. It stops responding completely I am not even able to go to terminal (Ctrl + Alt + F1). Leaving me with no option but to use the reset button. Causing me to loose all the work in progress.
3. Firefox responds very slowly upon closing it takes 5-6 seconds for the window to close.
PS:- KMS is also disabled in my system. Enabling it didn't improve stability. and here is the output of my videocard (lshw)
*-display UNCLAIMED
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
[code]....
Ok first off, I love debian, but on my new notebook I am getting a little frustrated with the terrible, video performance.Direct rendering is enabled on both systems, and openGL is working (I can if I wanted to use compiz etc...) fine on both systems, just running slow on debian.
I have tried Lenny, Squeeze and Sid, I have compiled the intel driver (and Mesa3D) from git and got it working (I am sure its working because its given me a slight boost), I ahve also tried building the latest stable (and RC2) kernel.If I install ubuntu 9.10 I get pretty decent 3D performance, its not ground breaking, but hey its an intel chipset so I am not expecting to kick the latest nvidia / ati card's backside.I really dont want to use ubuntu, I find it unstable when compaired to debian, but I also want to be able to play the odd game when I am bored, and at the moment I just cant do that under debian
Just installed my first linux ever. The highest resolution I can get on my video card is 1024x768. I found out that I need to install iegd driver for my intell GM45 card. Can you tell me where I can download that driver and how I can install this?
View 9 Replies View Related! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I don't know why but since I upgraded the KDE 4.4 desktop from openSUSE 11.3 to 4.5, the desktop just freezes some times.
If i was listening music, or watching a video I can still hear everything and even move the mouse, but nothing works.
So I switch to TTy1, perform a init 3, then init 5 to restart all the graphic system, and start again. This happens without message, without log, and without clue...
Should I downgrade to 4.4 or this has a Workaround?
Could people with Chipset : Intel i945PM confirm whether they can use 4Gb ram. I came across lot of posts that their sys will not go beyond 3.2Gb even when they use PAE enabled kernel or 64bit OS. I have this chipset and 4Gb ram and does not matter what I use it will not show more than 3.2Gb. I know that lot of 1st gen netbooks used the same chipset.
I read on some forums that it's a chipset limitation, but intel documents do not say this instead they say that it should support up to 4Gb.
Do you guys remember the inability for lucid to boot with some intel graphics cards?
http://ubuntuforums.org/showthread.php?t=1466337
http://ubuntuforums.org/showthread.php?t=1472282
Anyway I used a workaround to get it working on my Toshiba Portege laptop. However from it stemmed slower graphics, no splash, et cetera. That didn't worry me too much. However, I am now at the stage where I am getting arrays of different issues (that don't necessarily relate) and I would like to just have a nice clean install. I have been upgrading since 8.something and I long for freshness. My files are allready off.
Has anyone patched the kernel or anything? I'm purely a newbish end user and have not been following launchpad or anything. I did the workaround the week of the release. any fixes floating around? If not, I'll go back to 9.10.
I've got a Laptop with Intel video chipset. I've got a full slackware 13.37 installation and I'm using the huge-smp kernel all though it's not recommended. But I don't think the issue is kernel related. The problem is that it detects that there is a monitor connected to the s-video connector, but there is no picture on the screen. It doesn't matter what mode I use, but ideally I want cloning.
What happens when I use KDE and krandertray (or system-configuration for that matter) is that I can choose resolution and everything but no picture shows up on the TV. When I press the "Identify monitor" (Or something) button both the "1 TV1" and "2 LVDS1" shows up on the same monitor (laptop). That is weird.
Has anyone experienced anything similar or could point me in some direction as to what could be done?(I haven't had the chance to test modifications to xorg.conf quite yet, but I guess that should work. However, I think it's worth it to get rid of this bug)
How do I know if my intel chipset graphics card thing is installed?.
View 1 Replies View RelatedI'm trying to set up a new HTPC and can't get sound to work over HDMI. If I set System > Preferences > Sound > Hardware and set the profile to Analog Stereo Duplex, I get sound from the speaker port just fine.However if I set the profile to Digital Stereo (HDMI) Output I get nothing on my TV. I'm using 10.04 LTS.Some data:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
I have an HP Pavilion laptop running Xubuntu 11.04. It has an Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) chipset. The driver I'm using is a vesa driver. I ran a check from compiz-check.com to see if my computer could run compiz and it said that I don't have the right driver to run it.It asked if I wanted to check for any proprietary drivers, I ran the check and it came back with nothing. I used to have Ubuntu 9.10 on this same laptop and it ran compiz no problem so I'm a little confused why it won't work with the newer version. Is there something I'm missing? Maybe another driver out there I can try? And if there's really nothing I can do, is there anything out there comparable to compiz that my computer could run? I've been hesitant to upgrade from 9.10 because I ran into this problem with 10.04 so I went back to Karmic and stuck with it until they weren't updating it anymore.
View 2 Replies View RelatedWe have a PC in the office to which I have been granted to install Ubunto 9.04 on it. It has an intel graphic card Q45/Q43 Express Chipset.
I will proceed with the installation in a 1-3 weeks but I am expecting to have problems related to the graphic card not being seen or not configured ok.
Can you tell me how to configure it and what would its xorg.conf look like ?
Until I do the installation, I can use the Live-CD to test out your suggestions or do queries.
I have a TP T400 and wanted to use a bit of Linux. Installed Ubuntu 10.04 in my notebook using Virtualbox. The problem is that it doesn't recognizes the video chipset, which is a X4500 integrated graphics. After booting I receive an error msg saying that my video is not recognized and asks if I want to fix it. Dunno how to do that, so I cancel. After that I can only use 800x600, wanted widescreen (1440x900). Is there a simple way to fix it? Liked Ubuntu, wanted to use it.
View 4 Replies View Relatedim having problems finalizing the installation of fedora 10 on a new ASUS P5E-VM that uses Intel G35 chipset.
1. i think fedora did not recognize the video driver since all the installation was in text mode and i cannot use "init 5" to load a UI
2. i tried to find some drivers (if any1 can recommend a rpm that i can download i will apprichiate it very much) but could not transfer them to the fedora since i could not mount any USB disk on key in the linux i tried using: mount -t vfat /mnt/usb (after mkdir /mnt/usb)
3. i tried to burn the driver but then could not access the dvd...
4. no internet connection yet... but thats because i cannot access my network drives that are on the USB key as well...
It gets stuck at the splash screen(the ubuntu logo) However it can boot in failsafe graphics mode and it boots with no problem if my second display is connected. It freezes if I try to change my display settings and it tells me my graphics card is not recognized. I'm using Lucid Lynx. I tried to do a fresh start but grub loads before the ubuntu cd and/or usb drive.
View 2 Replies View RelatedWhat seems like forever ago now I tried to install Linux on this Intel 82855GME chipset laptop I was given. I started off with Fedora because it's what I'm most familiar with, unfortunately the live disk would crash at GDM so I could never get anywhere with it. Even doing a console based install would crash, but it at least pointed me in the right direction, it seemed the kernel was crashing for some reason (see image)Fedora livedisk crashlivedisk-error.jpg (95.96 KiB) Viewed 695 times
View 14 Replies View RelatedI have a IBM ThinkCenter workstation with an Intel i810 chipset and can only get a resolution of 800x600 maximum. I have read this url dealing with this chipset and resolution and cannot get anything past 800x600.http://www.freebsd.org/doc/handbook/x-config.htmland here is my /etc/X11/Xorg.conf
PHP Code:
Section "ServerLayout" Identifier "Default Layout" Screen "Screen0" InputDevice "Keyboard0" "CoreKeyboard"EndSectionSection "InputDevice" Identifier "Keyboard0"
[code]....
I just got nexuiz and i have had this problem,
Quote: Using Linux I only see the map but no players and items.
I need to update drivers for my Mobile intel 4 series express chipset family. I've also had 3d issues with Guild wars on Wine.
I've seen a bit about the display being frozen on intel integrated displays, but I do not see the answer anywhere. Does anyone know how to fix this problem: Ubuntu 9.10 boots and runs just fine for 10, 20 or even 30 minutes performing variety of tasks. Then, without warning the display is frozen. The mouse can move the pointer just fine, but I cannot interact with the desktop and the machine must be shutdown by holding the power button.
I've observed this while playing a Kpatience game, general surfing of the internet, and view ..... videos. One time it happened when the display powers off after being idle, but this is not consistently the case. I have tried to make the freeze happen, but am unable to do so (so it seems, anyway). What is happening here? Here are the details of my system:
Dell Dimension 2400 Desktop
Output from lshw:
*-display
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
[Code]...
Noob to Ubuntu here and I cannot access my wireless connection. It is working fine right now (wired) but I am using the TV stand as my computer desk right now so... not very practical. I tried following the "howto post a wireless issue (ticket)" but there was too much information for me to be able to put on here.
I have my SSID and my WEP. I am on Verizon DSL (only provider in my area). I tried using the wireless setting in network connections and I tried using DSL. I assumed that SSID+Password=Yay the internet works! but apparently not.
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
I have problem upgrading my ubuntu 10.04 lucid to a newer release of Ubuntu. I have done updates regularly but nothing prompt regarding upgrading Ubuntu. as mentioned in Ubuntu website, updating must result in a notification of upgrading. I want to know if there is any way to do this manually?
View 4 Replies View RelatedI just had a look on the Virtualbox site and thus far there is no listing for a Lucid specific release.Can I use the Karmic release or is this going to cause problems? I don't want to use the Ubuntu OSE version because I need USB support.
View 8 Replies View Relatedafter i installed some linux mint packages, i get the following error. W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 55708F1EE06803C5
its not related to the mint packages because i installed the keyring for that and since the error i have unchecked the linux mint repo. i have tried reinstalling the ubuntu-keyring package with no luck.
Will I receive all the updates as the final realease if I am running the RC. Don't want a a fresh install.
View 3 Replies View RelatedI have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies View RelatedWhen I go to the Update Manager to update my system I get the following error message: W: GPG error: http://packages.medibuntu.org lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2EBC26B60C5A2783
I am not sure what this exactly means and what I need to do to fix this.