Ubuntu Installation :: Intel 82865G Chipset - Black Screen During Installation?

Jun 29, 2010

I have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.

I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.

I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.

View 4 Replies


ADVERTISEMENT

Fedora Installation :: Intel Xorg Driver Kills Screen (black) And Keyboard On Intel GMA X4500?

May 12, 2009

I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.

View 2 Replies View Related

Ubuntu Installation :: X201 Black Screen On Bootup With 10.04 RC (can't Get Intel Xorg Driver To Install)

Apr 27, 2010

Pretty much what the title says.. a few more details:

- I installed 10.04 using the alternative install so I've been doing all this in safe mode
- I installed a newer kernel (2.6.33) and still black screen
- I tried to install an updated Intel xorg driver, but I kept getting dependency errors (xorg, x11, something else)

I read another thread on this forum from a user who is using the same platform (Intel HM55), and I got stuck at the last point (can't get Intel xorg driver to install).

View 4 Replies View Related

Ubuntu Installation :: Black Screen Using Alternate Cd On Hp Compaq 6710b (INTEL Mobile GM965/960)?

May 7, 2010

When trying to install Lucid on my HP Compaq 6710b (INTEL Mobile GM965/960 graphic controller) using the alternate i386cd with an usb pen i (re-)experiencing (known from the Jaunty installation) the following problem:Boot from USB (works) Select language (works) Choose to install ubuntu (works) Removing quit from the boot options, hit enter, see some output (works) Starting the installation interface (fail) The screen wents to black, but system seems not froozen. What i've tried to fix this issue:fb=false as bootoption (worked in jaunty, does not work with lucid) frambuffer=false

fb=off
debian-installer/framebuffer=false
vga=123, tried all of the offered modes

vga=771 (get some screwed up output on the screen, which i guess from that the system/machine is not frozen)
i915.modeset=1
i915.modeset=0
xforcevesa etc

Anyone managed to install Lucids with INTEL graphics + the alternate cd? PS: I need the alternate cd to setup an encrypted system. PPS: Just tested the desktop i386 image which works flawlessly.

View 4 Replies View Related

Fedora Installation :: Can't Install FC10 Or FC11 For Desktop With Intel GMA X4500HD Graphics - Screen Goes Black

Jul 20, 2009

I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.

View 1 Replies View Related

Ubuntu Installation :: Configure Xorg For Intel Q45/Q43 Express Chipset

Mar 31, 2010

We have a PC in the office to which I have been granted to install Ubunto 9.04 on it. It has an intel graphic card Q45/Q43 Express Chipset.

I will proceed with the installation in a 1-3 weeks but I am expecting to have problems related to the graphic card not being seen or not configured ok.

Can you tell me how to configure it and what would its xorg.conf look like ?

Until I do the installation, I can use the Live-CD to test out your suggestions or do queries.

View 3 Replies View Related

Ubuntu Installation :: Thinkpad T400 Video - Intel Chipset Only

Jun 18, 2010

I have a TP T400 and wanted to use a bit of Linux. Installed Ubuntu 10.04 in my notebook using Virtualbox. The problem is that it doesn't recognizes the video chipset, which is a X4500 integrated graphics. After booting I receive an error msg saying that my video is not recognized and asks if I want to fix it. Dunno how to do that, so I cancel. After that I can only use 800x600, wanted widescreen (1440x900). Is there a simple way to fix it? Liked Ubuntu, wanted to use it.

View 4 Replies View Related

Fedora Installation :: Unable To Install 10 On Intel G35 Chipset

Jan 15, 2009

im having problems finalizing the installation of fedora 10 on a new ASUS P5E-VM that uses Intel G35 chipset.

1. i think fedora did not recognize the video driver since all the installation was in text mode and i cannot use "init 5" to load a UI

2. i tried to find some drivers (if any1 can recommend a rpm that i can download i will apprichiate it very much) but could not transfer them to the fedora since i could not mount any USB disk on key in the linux i tried using: mount -t vfat /mnt/usb (after mkdir /mnt/usb)

3. i tried to burn the driver but then could not access the dvd...

4. no internet connection yet... but thats because i cannot access my network drives that are on the USB key as well...

View 3 Replies View Related

General :: Screen Resolution, Xorg, I810 Intel Chipset?

Mar 2, 2010

I have a IBM ThinkCenter workstation with an Intel i810 chipset and can only get a resolution of 800x600 maximum. I have read this url dealing with this chipset and resolution and cannot get anything past 800x600.http://www.freebsd.org/doc/handbook/x-config.htmland here is my /etc/X11/Xorg.conf

PHP Code:
Sectioná"ServerLayout"áIdentifierá"DefaultáLayout"áScreená"Screen0"áInputDeviceá"Keyboard0"á"CoreKeyboard"EndSectionSectioná"InputDevice"áIdentifierá"Keyboard0"

[code]....

View 2 Replies View Related

Slackware :: Intel 82865g Current Glxgears Slow?

Nov 22, 2010

When i checked last time couple months back glx gears gave me 1400 frames around now i get

Code:
glxgears
Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate.

21 frames in 6.6 seconds = 3.160 FPS
2 frames in 5.6 seconds = 0.359 FPS
84 frames in 5.8 seconds = 14.362 FPS
149 frames in 5.0 seconds = 29.724 FPS
300 frames in 5.0 seconds = 59.814 FPS
and everything is running slow im wondering where the problem might be?
code....

View 11 Replies View Related

Software :: Getting 3D Acceleration Working On Intel 82865G - No Xorg.conf?

Mar 8, 2010

I'm trying to get full 3D acceleration working with an Intel 82865G Integrated Graphics chipset on my Arch install. I'm wondering if it's possible to get it to work with xf86-video-intel, as I can't seem to get the Intel-provided drivers to compile. As also stated, I have to xorg.conf to speak of, so I can't exactly go in and simple edit lines, unless I wrote it from scratch, which I'd really rather not do, LOL. I've tried Google (including their special Linux search mode), and LQ Search, and I can't seem to find information that's relevant enough to me that I can use. Here's glxinfo (only the (hopefully) relevant portions):

Code:

[root@archie mrcode]# glxinfo | grep -i "direct rendering"
direct rendering: Yes
[root@archie mrcode]# glxinfo | grep -i "renderer"

[code]...

View 13 Replies View Related

Slackware :: Intel 82865g 2.6.33-smp Kernel Xorgserver 1.8, 2.11 Driver Version?

May 16, 2010

Im having a battle for quite some time now with lastest intel driver now and wondering if someone has solution. Ive checked :[URL].. and i decided to have exact same version of everything listed in there installed on the system.

I have few questions since i manually builded xorg-server 1.8 im wondering what packages are dependent for x11 to be upgraded so everything run smoothly for xserver 1.8. are those xf86-input* and xf86-video* the only one or there are other packages that i have to get rebuilded? the second question: im wondering if im the only one for that having a problem of that lastest driver dosent work for me, for the purpose i rebuilded the driver and libdrm 2.4.20 with kms enabled once i installed xorg-xserver 1.8.0

heres log problem:
Code:
214.704] (II) LoadModule: "intel"
[ 214.704] (II) Loading /usr/lib/xorg/modules/intel_drv.so
[ 214.704] dlopen: /usr/lib/xorg/modules/intel_drv.so: undefined symbol: resVgaShared
[ 214.706] (EE) Failed to load /usr/lib/xorg/modules/intel_drv.so
[ 214.707] (II) UnloadModule: "intel"

[Code]...

View 13 Replies View Related

Slackware :: Run 13.0 32-bit - Xorg And Xfce On Intel 82865G Video Hardware?

Feb 9, 2010

Is it practicable to run Slackware 13.0 32-bit, Xorg and Xfce on Intel 82865G video hardware? In case it matters, the 82865G is on an Intel D865GSA motherboard. Robby Workman says in this LQ thread "The 82865 chipset almost certainly isn't going to work with Xorg from Slackware 13.0. Stay with 12.2.". Netsearching suggests the alternatives are non-trivial.

View 2 Replies View Related

Ubuntu Installation :: Can't Boot 10.04 Disc - Boots To A Purple Screen Then It Goes To A Black Screen With A Load Of Writing Nothing Else Happens After Screen

May 12, 2010

I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?

View 1 Replies View Related

Ubuntu Installation :: After Installation Automatically Boots Into A Black Screen With Blinking Cursor?

Jun 24, 2010

Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing

I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.

View 9 Replies View Related

Ubuntu Installation :: Dell Latitude E6510 Installation Black Screen?

Oct 16, 2010

I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all

I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.

View 2 Replies View Related

OpenSUSE Hardware :: 11.3 On Intel Core I5 With Integrated Graphics + Intel H55 Express Chipset

Aug 18, 2010

! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel´┐Ż 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...

I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...

View 8 Replies View Related

Ubuntu Installation :: Black Screen After Fresh Installation Of Kubuntu 10.04

May 1, 2010

After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.

First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.

Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".

I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?

View 9 Replies View Related

Ubuntu Installation :: E-MACHINE Black Screen After Installation?

Apr 29, 2011

i just installed ubuntu 10.10 in my e-machine d730z, intel pentium processor P6, intel hd graphics, 2GB DDR3, 250 GB HDD. After installation im getting a black screen http://img684.imageshack.us/i/img05711m.jpg/.'m still new with ubuntu and by the way, after a minute, the screen goes black. i cant see the text.

View 1 Replies View Related

Fedora Installation :: Black Screen On Boot After Fresh Installation Of F12

Nov 24, 2009

I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.

View 9 Replies View Related

Ubuntu Installation :: Black Screen After Installation

Oct 6, 2010

I've got a big(?) problem. I installed the Ubuntu 10.04 yesterday on my Acer Aspire One, it worked flawlessly thru the installation process and at the end it restarted (as normal I guess?). Anyway, when it started again the screen was completely black. Even if I try connecting a secondary screen I get the same result. In other words, after instalation I've never been able to use my computer...

Info: It was installed from a usb stick, because of the lack of a cd drive. I used the program "unetbootin" to tansfer/instal the .iso I dwonloaded from the ubuntu download site. I can see now that I maby downloaded the wrong version because it's called "ubuntu-10.04.1-desktop-i386". But I hope there is some way to fix it, or delete it and install the right version?

View 6 Replies View Related

Ubuntu Installation :: Black Screen After Installation?

May 19, 2011

I installed 11.04 Desktop disk on my HP wx8000 workstation. When I rebooted, it gave me the black screen with a blinking caret.

- I have tried reinsalling grub2.
- I have tried adding "nomodeset" to the load command line
- I have tried setting grub to use only text mode.

View 6 Replies View Related

Ubuntu Installation :: Can't Boot From Cd \ Purple Screen With A Couple Symbols At The Bottom, And Then The Screen Goes Black?

May 27, 2011

'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens

View 4 Replies View Related

Ubuntu Installation :: Cannot Boot / Hangs On Black Screen With A Flashing White Dot In Top Left Corner Of Screen?

Jun 1, 2010

After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.

my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.


i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.


pls let me know if there is anything i missed, and advice if possible in what to do.



thanks
kannanni

View 2 Replies View Related

Hardware :: Intel Graphics And Games - Black Screen

Mar 17, 2011

I use Intel HD Graphics and every time I run a game, it black-screens and I have to restart a thousand times before the game works and I can switch to windowed mode (restart once to do this).

lspci:
[alex@alex01 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) .....

I also use an HDMI cord (since computer has HDMI support) so this may be contributing to the problem. The same does not occur with my laptop, which runs Nvidia graphics and Ubuntu. I really want this to not happen so I can play my games instantly without restarting a million times. Some games have yet to work (AssaultCube mostly).

View 14 Replies View Related

Debian Installation :: Black Screen After Grub Loading Screen?

Feb 22, 2011

another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.

View 9 Replies View Related

OpenSUSE Hardware :: Intel I7 HD Graphics Gives Black Screen Sometimes On Boot Kernel 2.6.37 Rc7

Dec 30, 2010

Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.

I have tried the following so far to identify the issue or isolate it:

- Switching to the console screens has no effect, still the black / blank screen.

- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available

- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver

- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.

Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?

View 9 Replies View Related

Ubuntu Installation :: On Intel I5 64 Bit - Get Stuck With Blank Screen

Apr 28, 2010

I just bought a new Dell Studio Laptop with Intel i5 64 bit processor with Windows 7. I installed ubuntu with in my Windows 7 through CD and also tried to run it by installing it on Pen drive. But it just boots perfectly but get stuck with blank screen after that.

View 2 Replies View Related

Ubuntu :: Black Screen After Installation Of 11?

May 1, 2011

I have downloaded Last version of Ubuntu 11.04 and installed it. The installation went correctly with some flickering in display during installation. But the real problem starts after installation, when I turn on my PC and select Ubuntu from GRUB, the screen flickered a lot and then went black and PC got hanged.

View 5 Replies View Related

Ubuntu :: 11.04 Installation - Screen Is Black

Jun 14, 2011

everytime i try to install ubuntu 11.04 the screen is just black is there any fix for this ?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved