I'm trying to set up a new HTPC and can't get sound to work over HDMI. If I set System > Preferences > Sound > Hardware and set the profile to Analog Stereo Duplex, I get sound from the speaker port just fine.However if I set the profile to Digital Stereo (HDMI) Output I get nothing on my TV. I'm using 10.04 LTS.Some data:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
Ok, so let me first start off by saying I'm a linux noob. I feel no shame. I've been working on trying to solve my issue for a few days now and after much research I am still no better off. But I am able to at least narrow down my problem. The long and short of it is that my HDMI audio device is not showing up in Ubuntu 10.4 x64 edition. Let me give a few specs.
Motherboard: ASROCK 785GMH/128
Onboard video: ATI Radeon HD 4200
Onboard audio: VIA VT1708S
OS: Ubuntu 10.4 x64
Alsa drivers: alsa-driver-1.0.23
ATI Drivers: ATI Catalyst 10.6
Running the latest version of ALSA and ATI's proprietary linux drivers. I can see all outputs (including the s/pdif) except the HDMI. From my reading there should be a device listed on a 2nd card called ATI HDA HDMI aplay -l returns the following result:
[Code]...
It gets stuck at the splash screen(the ubuntu logo) However it can boot in failsafe graphics mode and it boots with no problem if my second display is connected. It freezes if I try to change my display settings and it tells me my graphics card is not recognized. I'm using Lucid Lynx. I tried to do a fresh start but grub loads before the ubuntu cd and/or usb drive.
View 2 Replies View RelatedI've seen a bit about the display being frozen on intel integrated displays, but I do not see the answer anywhere. Does anyone know how to fix this problem: Ubuntu 9.10 boots and runs just fine for 10, 20 or even 30 minutes performing variety of tasks. Then, without warning the display is frozen. The mouse can move the pointer just fine, but I cannot interact with the desktop and the machine must be shutdown by holding the power button.
I've observed this while playing a Kpatience game, general surfing of the internet, and view ..... videos. One time it happened when the display powers off after being idle, but this is not consistently the case. I have tried to make the freeze happen, but am unable to do so (so it seems, anyway). What is happening here? Here are the details of my system:
Dell Dimension 2400 Desktop
Output from lshw:
*-display
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
[Code]...
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I have installed Tvtime and XawTv applications and I am currently trying to configure both these applications to detect my tv tuner card (pixelview play tv pro with conexant cx2388 chipset). configure both video and audio with channel scan for my tv tuner card?
View 2 Replies View RelatedI have been trying for a while now to get the audio over HDMI working from my PNY G210 graphics card and mythtv but with no luck.
I have followed this guide [URL]
prior to following this I only had my motherboards on board audio showing up but I am now at the stage that I can see the HDMI audio and select it and un mute it but still cannot get any sound out of it.
As a side effect after following the steps from the link above, now every time I boot the computer up my on board audio is muted so I need to un mute it from sound preferences.
This is my audio config as it stands:
scott@MythtvFrontend:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
[Code].....
The mother board is a an ASUS MN32-SLI deluxe and I have 2 graphics cards in it, a 9600GT to run the 2 monitors connected and a G210 which I would like to use to connect to my TV using the HDMI output. At the moment I am using the VGA output from the G210 to the TV and a separate audio out from the computer which was working fine but the audio is now always muted on startup.
I don't think it is an issue with my mythtv settings as I cannot get any audio over the HDMI using speaker-test (on board analogue audio works ok).
I am not sure what to do about my problem so I am making a post. I will point out that I am kind of new to linux, but I understand the basics of command line operation and such, which is why i didnt post this in the beginners forum. I bought a Zotaz Zbox SD-ID12-U, linked below, and am having annoying troubles with the HDMI connection to my TV.[URL]...I have installed Ubuntu 11.04 via USB DVD player -- everything seems to be working except for this. The issue is that through HDMI at 720p it over-scans about 20 pixels on all four sides of the tv screen. In the "Monitor Preferences" it lists only 3 resolution options, all of which have the same overscan issue:
1280x720(16:9)
800x600 (4:3)
640:480(4:3)
The device has an Intel GMA 3150 on it and when I run "lspci | grep VGA" the output is:00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02) This problem does not exist when I use a VGA cable, which scales the screen properly for a variety of resolutions. I prefer to use HDMI so I would like to resolve this issue. I have looked through the forums but am kind of overwhelmed with this stuff and really dont know where to begin.
I'm able to get HDMI audio/video perfectly when I'm playing a dvd on mythbuntu. However, If I try to play the ripped version or any other video that is on the hard drive, I get no Audio?
I've checked alsamixer to make sure the device isn't muted.
If I use vlc media player I don't have any audio either. Is there a way to enable hdmi audio as default?
I have just build a HTPC with an Intel DH57JG Mini-ITX motherboard. The motherboard supports HDMI Audio but I just can't make it work.
View 8 Replies View RelatedI've been googling and searching these forums and I can't find a fix. I just discovered that I have a headphone jack on the bottom of my monitor and it would be a lot more convenient to use that rather than the jack on my tower. However, when I switch to HDMI audio output I don't hear anything. I now it's not my cable because it works on my HDTV and throughput audio fine.
I have Ubuntu 9.10 with the Asus M4A78T-E mobo with integrated ATI HD 3300 graphics. I am running the official drivers from ATI, ATI Catalyst 10.3 Proprietary Linux x86 Display Driver, the latest and greatest, not the one from Synaptic. I know this is a bad time to be looking for a fix since 10.4 is out in 8 days but if anyone knows a quick fix that would be great.
I currently installed ubuntu 10.04 and I am having trouble getting sound from my monitor. The monitor that I have is a HANNS-G HH251. It is connected to a Sapphire 4850 Video card through a HDMI wire. The monitor has audio when I boot it in windows7, but there is no audio when I use ubuntu 10.04.
View 5 Replies View RelatedI am running 10.04 with an integrated Radeon HD3200 card. When I set up the tv through hdmi, the sound works perfectly; however, when I switch to analog audio to play something else, the next time I try to use hdmi audio I get nothing. It shows to have good level through Pulse Audio Volume Control - shows like there is a sound coming through it, but I get no audio through the tv. The only way I can fix this is by uninstalling proprietary drivers and reverting back to generic configuration and then reinstalling proprietary drivers. I have to revert back to generic in order to get the sound working again.
View 1 Replies View RelatedI have a dell 1525 laptop with ubuntu 10.10 . Just made the switch from win vista . Everything seems to be perfect, wireless, video, ect. However no audio on my onboard hdmi port. The video is displayed perfect runs very smooth. This could be my lack of knowledge on ubuntu just not understanding what settings to change maybe no driver for the hdmi audio. I would like to add that the laptop onboard speakers work fine.
View 5 Replies View RelatedI have an ECS A785GM-M and the integrated HD4200 HDMI audio was working out of the box on a clean Ubuntu 10.04 install. After the updates and all, everything still worked just fine for a month.
Then, I installed a HD4870 with ATI DVI to HDMI adapter and the sound is not working (it works flawlessly on Windows 7, so it is not the hardware). The creepy stuff is that on Pulseaudio GUI configuration, everything looks right: ATI 48x0 HDMI is selected as output and when some sound is playing the bar moves, although there is no sound coming from the TV speakers.
I tried editing /etc/pulse/default.pa as suggested on this link, but it didn't helped. I'm kind lost here, since it looks that there is nothing wrong and yet, it is not working.
Because of some kind of mismatch between the latest X-server and nvidia drivers which crashes recent versions of the xserver, I've downgraded with a clean install of mythbuntu 10.04.
Trouble is, now I'm getting no sound through the hdmi to the tv. When I try aplay -l I get info for sound card 0 (HDA Intel), but nothing is showing for soundcard 1e So it's not seeing the card, so I can't configure it.
I have recently installed Ubuntu 11.04 64bit. After normal install process, it invited me to install ATI proprietary drivers (because I have an ATI Radeon HD4850 video card). Everything seems to work out of the box, except the HDMI sound. The HDMI video works OK, and also the normal sound using the onboard soundcard work OK. By my knowledge I think I have setup the audio properties correctly. Some screen-shots attached. What happens when I switch the output to HDMI is no audio signal on the TV. The HDMI works OK (both sound and video) on my Win7 64 bit install.
View 4 Replies View RelatedI have a G62 HP laptop with Ubuntu 10.04 on it. I have updated alsa and everything else I can think of. When I have an HDMI coard plugged in, sound only comes out of the computer (I use VLC).
View 1 Replies View RelatedI've got a Gateway laptop, running 10.10. It's running: Mobile 4 Series Chipset Integrated Graphics Controller
When I connect my HDMI, I can see my desktop wallpaper, but no icons, or programs. And I haven't even attempted sound yet.
How to fix this so that I can get video OR sound?
I was running Ubuntu 9.04 and just upgraded to 9.10 recently. I see many others are having problems with their sound. I too do not have sound. I did get sound running briefly with an Alsa update, but it was muffled. In trying many other fixes, I again have no sound and can not resolve it. I am thinking of burning a new cd and doing a fresh install and starting over.
My lap top is an MSI GT725 US model with an HD4850 mobility graphics card. I dual boot between Vista 32 bit and Ubuntu.
Has anyone else had any luck getting the Realtek ATI sound working in 9.10?
I want my computer to be used as a DVD/BD player, and as of recently it has rejected its windows install and refuses to reinstall. Ubuntu 9.10 installed without problem, but when I select the X1200 (hdmi) audio output via the top right icon no sound comes out. I've searched this topic and one theory was that if i ran ALSA mixer the x1200 audio might be muted by default; it was not muted. I've also been told to update my catalyst, but using synaptics packet manager to download the catalyst control center, when I run it I get the message no supported hardware found. Is there any way to get this to work, or am I stuck with my speakers/3.5mm jack?
View 1 Replies View RelatedI am currently running Intel DG45fc Mobo. works great with Ubuntu thus far. However when connecting to my LCD through HDMI I can not receive any sound.
View 3 Replies View RelatedI installed Ubuntu 10.04 a few days ago and HDMI audio worked out of the box (with the nVidia drivers enabled). Today I did a system update and (among other problems) there is no more sound coming over HDMI. I'm not really sure what to do to diagnose this problem... where would I start?
View 7 Replies View Relatedim trying to get my xbmc box running on an asus ion mobo. in gnome i set all audio output to the hdmi driver but im not getting any sound on the tv. Im a newbie by the way so it's problably some silly thing.. but i've included a link to my alsa information and pulseaudio settings in case it's a big thing.URL...
View 4 Replies View RelatedRecently I installed Ubuntu 10.10 64bit and I have a problem with it.
I have a motherboard with internal audio card as well as I have ATI 2600 card. When I just installed Ubuntu 10.10 sound via motherboard worked perfectly.
But some time later it disappeared. Actually "Output device" that represents audio card disappeared. See screenshot of the Audio Settings dialog.
I made 2 thing - most likely that one of them cause this problem:
- I tried to setup Panasonic Plasma TV as a second monitor via HDMI output of my video card (ATI 2600).
- I added maven-backports repository (new kernel or new audio driver?)
Have anybody seen this problem? Are any pointers how to fix it? If you need any additional info - let me know I'll be glad to provide it.
I plugged my dv9000 laptop (Ubuntu 10.04) into my TV, configured the nvidia dual monitor settings, but I still cannot figure out how to get audio...
View 1 Replies View RelatedI've recently encountered a sound issue and I recently installed the nvidia gt220 in my box and was thrilled at how well it worked with hdmi until I tried to use the audio. I updated my alsa and went into the alsamixer and it does detect my gt220. I unmuted all spdif and tested the sound and with success the sound test works. I know the card and device numbers that work with the audio but now sure where to make changes so it will default to that device instead of the onboard audio that it seems to try to use now. I am running lucid 10.04.
View 4 Replies View RelatedI have been pining over and over through 100s of forum posts to no avail. My problem is that my audio through HDMI does not work fully. I upgraded to 1.0.23 alsa release, which seemed to help, but I cant get anything besides 'Digital Stereo (HDMI) Output' from System-Preferences-Sound. Maybe this is normal, and I will have to rely on xbmc, etc. to provide 5.1 surround sound?
View 9 Replies View Relatedgetting audio over HDMI on a Revo R3700 with Ubuntu 10.10?
aplay -l
Code:
living-room@livingroom-Aspire-R3700:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
[Code].....