Ubuntu :: Filezilla Fails To Resolve Domain?
Jul 24, 2010
I'm having a strange issue with Filezilla that doesn't affect any other apps.I know my network isnt IPv6 friendly, so I've disabled it in Firefox and in Ubuntu - everything bar Filezilla finds and resolves addresses properly. Filezilla just gives me the responses below, trying to connect to 1.0.0.0:21 for any domain I try to FTP to. If I then go to terminal and do an ftp ftp.asdad.com etc, once terminal has resolved the domain, filezilla works - very odd. how I can stop having to do this step in terminal?
Status: Resolving address of ftp.xxxx
Status: Connecting to 1.0.0.0:21...
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Delaying connection for 1 second due to previously failed connection attempt...
Status: Delaying connection for 1 second due to previously failed connection attempt...
Status: Resolving address of ftp.xxxxx
Status: Connecting to 1.0.0.0:21...
View 2 Replies
ADVERTISEMENT
May 13, 2011
I have a problem with my filezilla (or my ftp server). When I want to connect to my ftp server (and also other ftp servers!), after MLSD command, I get a "Connection timed out" error.
Log:
Code:
Status: Resolving address of khanemashroote.ir
Status: Connecting to 46.4.196.109:21...
Status: Connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.4rc2 Server (Debian) [::ffff:46.4.196.109]
Command: USER badihi
Response: 331 Password required for badihi .....
Command: MLSD
Error: Connection timed out
Error: Failed to retrieve directory listing
View 1 Replies
View Related
Feb 23, 2010
No idea whats going on here I host a couple of domains. Recently I changed ISP and had a change of IP address. I changed my zone files to the new address and updated my nameservers to the ones given by the new ISP and now, my main domain wont work, I can however, receive mail, checking using DNS quick check works and other domains are fine. I'm using OPENSUSE 11
domain
http://www.smalljokes.net
works fine
http://www.hatchnet.com.au
fails
I'm sure i'm missing something simple.
View 7 Replies
View Related
Mar 5, 2010
Is there a way to force a domain to resolve to a specific IP using .htaccess?
View 1 Replies
View Related
Nov 15, 2010
There seems to be some problem in my dns server.
The configuration is perfectly ok.But what happens sometimes is,
it couldn't resolve some domains sometimes.After restarting the
named,it again resolves the domain.
whats happening on my dns server
View 10 Replies
View Related
May 2, 2010
I would like to configure DNS server in RHEL 5.3 to resolve domain name. Do you have step by step procedure or automated script to configure the dns server?
View 2 Replies
View Related
Jul 19, 2011
i have hosted three websites on a computer at home on debian. i use ServerName directive for each site to map it to the desired dir. For example there are kdelchev.com and webtut.org on the same IP(95.111.108.148).
When i try to open any of my sites eg. kdelchev.com with my pocket pc (Asus P535) it displays carstatistics.eu, instead the site i want. Is that an apache misconfiguration? And what have to change to make it working?
View 1 Replies
View Related
Apr 16, 2010
I'm new here, so please be gentle! I recently installed F12 64 KDE on my Acer Aspire 1810TZ, could connect to the WLAN router but neither the native Konquerer nor Firefox could open any pages...
resolve.conf has the DNS according to DHCP offer, from command line dig properly resolves the name, ping (e.g. google) works, telnet to domain-name on port 80 works, GET too. When using the browser with the domain-name I tells me "Server not found", tcpdump doesn't display any activity. But when I manually change the domain-name with the IP (received by command line dig) then the browser has no problem how do browsers interact with the network resources of the OS?
View 4 Replies
View Related
Mar 19, 2009
I recently installed bind9 on mandriva 2008.1, after having done the necessary configuration.. I still can't find my domain I configured cant ping on other machines on the LAN but can actually ping on any other website on the internet even though name server is configured to point to local machine..... I dont understand what I'm doing wrong.
View 14 Replies
View Related
Nov 4, 2010
Whenever I try to use the sudo command in the terminal I get the message unable to resolve host, then my computer name. Here's some command line output with some files which I think may be causing the problem. I have Operating Systems homework and need sudo
steve@steve-laptop:~$ sudo gedit /etc/resolv.conf
sudo: unable to resolve host steve-laptop
steve@steve-laptop:~$ cat /etc/resolv.conf
# Generated by NetworkManager
domain domain_not_set.invalid
search domain_not_set.invalid
nameserver 68.237.161.12
[Code].....
View 1 Replies
View Related
Oct 15, 2009
As the title suggest, I have downlaoded the latest copy of Ubuntu Server from the ubuntu website.Everything installed fine. DHCP configured ok as far as I can tell. I can ping other machines on my network (which are running Windows) and they can ping the Ubuntu machine and conenct to Apache which is running on it.If I try to ping google.com or any other domain, it gives the correct IP address but gives no response to any pings, dont telnet on port 80 (or any toher potr for that matter) on any machine on the internet. I checked the settings using ifconfig to see what DHCP had assigned, and they matched the windows machines configuration (other than the IP address obvisouly). I tried assigning a static IP, even reserving a particular IP for my NIC.
Whatever I do, i cant connect to any machine outside the network via IP or domain.I have searched everywhere and tried everything i can find on the net but still to no avail.The Windows machines are part of a domain called alcom-uk.local and run off of a Windows Small Business 2003 Server. Not sure if i need to manually setup Ubuntu to connect using a domain or anything.
View 14 Replies
View Related
Mar 17, 2011
I am using CentOS 5.5 and have installed PowerDNS with MySQL backend. I have Apache and PHP installed and I'm using PowerAdmin to create the master zone.I have tried to configure the zone to resolve my domain name and I have had no success.I've googled and read tutorials and have tried suggested methods, but it's still not working.This is a new adventure for me and I would like to be able to host a site from my home for experimental purposes. I am a mature (read OLD) student enrolled in Networking and have done some units in Web Design (though I'm not very good at it).
View 7 Replies
View Related
Dec 2, 2010
I have an internal domain (dev.lan) for which my Ubuntu server is authoritative. We have a number of subdomains under that domain (test.dev.lan, svn.dev.lan, etc.). The server also acts as the primary DNS server for my office. It was originally set up under Ubuntu 8 and worked great.
However, ever since we upgraded to Ubuntu 10, our Windows clients periodically lose the ability to resolve domains on the dev.lan domain. Internal IP addresses can still be pinged from the Windows machines so it does not appear to be a network-connectivity issue. External domain names continue to resolve without any problems. The only workaround is to restart networking on the Windows clients. It's frustrating because it happens several times a day.
bind9 logs no obvious error messages.
View 3 Replies
View Related
Jan 18, 2011
I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
View 9 Replies
View Related
Feb 4, 2010
How to resolve a standalone RHEL machine under Windows Domain Controller?
View 4 Replies
View Related
Jul 28, 2010
I have a laptop with Windows 7 and Ubuntu installed in seperate partitions. When I boot up the computer I get options to boot either in windows 7 or Ubuntu. Yesterday I updated Ubuntu to 10.4 version. I have been having issues with grub rescue, which was rectified an hour ago. Now I can boot up into windows 7, but when I try to boot into Ubuntu, I get a GRUB screen as below code...
View 1 Replies
View Related
Dec 11, 2010
I did a fresh install of the netbook version of 10.10 on a Gateway CX2618. I ran all updates and then rebooted. I installed LWO 5.4 from the repository and joined the domain. I put in a kerberos realm (same as my domain) but I don't know for sure if I have a kerberos realm. I successfully joined the domain with the GUI. I rebooted, per instructions.
I tried to login with domain username and password (DOMAINusername). It takes a couple seconds to think and then kicks me right back to the GDM login screen. I have tried several times with the same login and have tried other domain users. It doesn't say "authentication failure" but I should have tried to use the wrong password to see if it would do the same.
I'm stumped. Is there a ppa I need to add? Is Likewise-Open supposed to work with the maverick netbook edition. I saw the previous notice on the Likewise site about OpenLDAP but I thought that was resolved in the updates and no longer in effect. Should I install LWO 6.0? If so, from where? From a ppa somewhere? From the Likewise site?
I can still login with a local admin account.
My ultimate goal is to automatically mount network windows shares for various students, based on their login credentials and using CIFS. I almost had this figured out before this fresh install.
View 8 Replies
View Related
Jan 27, 2011
After clicking to install notified updates, I receive the following message...code...
View 9 Replies
View Related
Sep 1, 2011
I've searched the interwebs and have never had this problem before but I can connect with ssh no problem. The problem arises when I try to connect with sftp. I get code...
View 1 Replies
View Related
Apr 19, 2010
I followed the following two articles to create a bootable USB key that will run the Kaspersky Rescue Disk, but both methods fail, using two different USB keys:
UNetbootin - Create Bootable Live USB Disks For A Variety Of Linux Distributions From Windows Or Linux : "Determining root device: Could not find the root block device in ."
Creating Bootable Kaspersky Rescue USB Disk : "Could not find kernel image linux"
Kaspersky only provides support for when trying to boot from a CD. Does someone know what I could try to get this to work as shown in the articles?
View 4 Replies
View Related
Jun 27, 2011
I joined my Ubuntu 1004 LST to Windows 2003 AD.
it always frozen my ssh login window when the DC crashes. when the DC crashes, the putty won't give me the password prompt and will go inactive directly after a while no matter what username(local or domain users) I give
is it possible to avoid to check domain users before it gives me the password prompt? or, we can make it to check if the user is a local user first?
View 2 Replies
View Related
Jul 9, 2010
I'm trying to figure out why I cannot add a machine to the Domain from the windows. in the smb.conf file, I have the proper
add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
View 2 Replies
View Related
Dec 5, 2010
Did a new install of F14 on a T61 Thinkpad w/ Motorola DSL router (ATT supplied). The install was smooth and had no indications of problems.
When I went to use the browser, it showed a functional Fedora website. But if I try to go to goggle or any other web address, the browser complains that it can't resolve the web address.?
View 2 Replies
View Related
Dec 18, 2010
I originally uninstalled KMail but now i would like to try it out again and get more familiar with it.
Problem is, since i upgraded to KDE 4.5 i can't.
There is always some dependencies issue. code...
View 3 Replies
View Related
Jan 18, 2011
I have set up DNS server set up on my RH 5.5 system. It is working perfectly as Caching only Server but but when i tried to make it a primary server for a zone it didn't resolved. I am actually a newbie so please correct me if i am wrong somewhere. Here are my configuration files code...
View 10 Replies
View Related
Mar 21, 2011
I have proftpd set up on my linux home server. As I have a dynamic IP at home, I am using DynDns.org to provide a hostname for me. I have told proftpd to use this address as the MasqueradeAddress, to allow passive FTP connections through my NAT router.
However, whenever I boot my server, proftpd fails to start saying it cannot resolve this address. I assume this is due to the boot order, as something network or DNS related hasn't started up by then and it can't find the address. How should I deal with this problem? Can I get proftpd to do its checking for the address later on? Or can I change the startup order so that proftpd is started as the final item in the boot sequence?
View 1 Replies
View Related
Jul 1, 2011
I have two servers relavant here: mail.domain.com (1.1.1.1) - which is the nameserver and the mail server for domain.com. www.domain.com (2.2.2.2) - which is the www subdomain for domain.com domain.com (cname www.domain.com) - an alias for www.
The zone file for domain.com lists mail.domain.com as the MX server for domain.com. 2.2.2.2 is actually being served web pages as a virtual host. It's real hostname is www.anotherdomain.com. Mail for domain.com works pretty well, in general. However, if I attempt to send mail from www.domain.com (or its alias domain.com), I get "mail for domain.com loops back to myself" in the postfix logs. On 2.2.2.2 /etc/postfix/mail.cf has mydestination = www.anotherdomain.com, localhost. How do I tell postfix on 2.2.2.2 that mail for domain.com needs to be delivered to mail.domain.com?
View 1 Replies
View Related
Feb 16, 2011
i have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
View 3 Replies
View Related
Feb 3, 2010
At work, we run Windows... Windows domain, windows workstations, etc. Today my boss asked me my thoughts on running an Ubuntu lab within the mixture of our existing Windows setup.
Well, that brought several questions to mind. So I understand you can bind an Ubuntu computer to a Windows domain, seems easy enough, whether you do it through Samba or the other guide I read that I kind of forget at the moment, but anyway...
I was just curious how Ubuntu interacts with domain users when on the windows domain. For example, if we have an Ubuntu machine on the Windows domain with a local user "administrator" and that's it, would any domain users be able to log into the Ubuntu work station, similar to how it is on Windows?
View 7 Replies
View Related
May 13, 2010
The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
View 9 Replies
View Related
