Did a new install of F14 on a T61 Thinkpad w/ Motorola DSL router (ATT supplied). The install was smooth and had no indications of problems.
When I went to use the browser, it showed a functional Fedora website. But if I try to go to goggle or any other web address, the browser complains that it can't resolve the web address.?
After clicking to install notified updates, I receive the following message...code...
View 9 Replies View RelatedAfter a massive meltdown with the upgrade, I finally got the system put back together. Had to reinstall grub. It now defaults to a version that says "Generic - pae". When choosing this from the grub menu, it always hangs on the Ubuntu splash screen; however, I found that when I choose "previous Linux versions" from the grub menu, then choose the Ubuntu-generic, everything works fine - other than my initial bad impression of unity - but it works, at least.
why my default choice in grub doesn't work, and what I need to do to fix it? Below is a cut and paste from /boot/grub/grub.cfg. The first entry is the one that does NOT work, and the first entry after "submenu" is the entry that DOES work.
menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
[Code]....
I am currently creating a fedora 13 based repository for a Class Project at my school and am having some troubles. The repository is set up for 2 different version of fedora, 7 and 13, with 7 being the first to be used.
As of right now I am stuck with a [errno -3] error code. I have installed downloaded all the .rpm's needed and placed them in /var/www/html/fedora/7/os/i386, then used createrepo to make the repodata folder, repomd.xml and the .gz's needed, edited the yum.conf and the yum.repos.d/ *.conf files, and now here I am.
I tried installing the VBOX additions. But after running the VBoxLinuxAdditions.run file, building of the kernel modules failed. It gave following message: The headers of the currently running kernel were not found. If the current compilation fails then probably this could be the reason. The missing package can be probably installed with yum install kernel-devel-2.6.40.4-5.fc15.i686.
But when I tried installing the above kernel headers and devel package, it says no such package were found.kernel is 2.6.40.4-5.fc15.i686 but the kernel headers are not available for this version. They are available for previous versions i.e 2.6.40.3-0.fc15.i686.should I downgrade my kernel version (if it's possible) or is there any way things can work out. I have enabled 3D accelaration and given the memory of 128 MB for display. The memory for Virtual Box is 1 GB and hard Disk is 8 GB. The host system is windows 7.
I have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
I have tried following guides on forums and google to which i have had the sound working once, but when i restarted my server it went off again :? what i need is some step by step instructions I have pulseaudio installed and in the option sound preferences the output says dummy output, but when it was working it had my on-board sound card there I am new to linux and dont know where to start.
View 5 Replies View RelatedI have a laptop with Windows 7 and Ubuntu installed in seperate partitions. When I boot up the computer I get options to boot either in windows 7 or Ubuntu. Yesterday I updated Ubuntu to 10.4 version. I have been having issues with grub rescue, which was rectified an hour ago. Now I can boot up into windows 7, but when I try to boot into Ubuntu, I get a GRUB screen as below code...
View 1 Replies View RelatedI followed the following two articles to create a bootable USB key that will run the Kaspersky Rescue Disk, but both methods fail, using two different USB keys:
UNetbootin - Create Bootable Live USB Disks For A Variety Of Linux Distributions From Windows Or Linux : "Determining root device: Could not find the root block device in ."
Creating Bootable Kaspersky Rescue USB Disk : "Could not find kernel image linux"
Kaspersky only provides support for when trying to boot from a CD. Does someone know what I could try to get this to work as shown in the articles?
I'm having a strange issue with Filezilla that doesn't affect any other apps.I know my network isnt IPv6 friendly, so I've disabled it in Firefox and in Ubuntu - everything bar Filezilla finds and resolves addresses properly. Filezilla just gives me the responses below, trying to connect to 1.0.0.0:21 for any domain I try to FTP to. If I then go to terminal and do an ftp ftp.asdad.com etc, once terminal has resolved the domain, filezilla works - very odd. how I can stop having to do this step in terminal?
Status: Resolving address of ftp.xxxx
Status: Connecting to 1.0.0.0:21...
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Delaying connection for 1 second due to previously failed connection attempt...
Status: Delaying connection for 1 second due to previously failed connection attempt...
Status: Resolving address of ftp.xxxxx
Status: Connecting to 1.0.0.0:21...
I've searched the interwebs and have never had this problem before but I can connect with ssh no problem. The problem arises when I try to connect with sftp. I get code...
View 1 Replies View Relatedi'm trying to install the heirloom version of vi on fedora 13, because i'd like to use it for demonstrations (i really need the traditional UNIX version of vi found in BSDs and Solaris, so please don't recommend vim). i managed to hunt down an RPM, which is originally for OpenSUSE.
however, installing fails, saying that i need '/etc/termcap'. now i'm not really sure how can that be missing, but it is. and i can't find termcap in yum, and the ones on pbone.net are for ancient versions of Fedora. i really don't want to go through the trouble of installing some BSD in qemu just for a simple demonstration.
I upgraded Ubuntu from version 10.04 to 10.10. When the upgrade completed I was asked to reboot. After reboot I simply got the message "error: file not found" on the screen. After a few seconds the machine rebooted.
I guess it is the boot loader that was not found. Is there some hope of fixing this problem?
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
I originally uninstalled KMail but now i would like to try it out again and get more familiar with it.
Problem is, since i upgraded to KDE 4.5 i can't.
There is always some dependencies issue. code...
Downloaded the torrent first, burned to a new DVD-RW, and tried all install options I could think of. Then downloaded to file, burned to another new DVD-RW, same result. This morning I downloaded the Live CD, and it got all the way to the blue screen just before the login page, and stuck there. I finally gave up and reinstalled Fedora 10 again on my drive. The problen seemed to be with a missing or corrupted package, although I can't remember exactly remember which one. My machine is a custom one, Nvidia Gforce, and an Elite Group MB. F10 runs fine, no problems at all. Is this a commom problem with 11?
View 4 Replies View RelatedI installed Fedora 11, but i can't do programing
teh fedora seems not to include anything IDE for free like previous version
I can not search on installed desktop what software were included
it asks me to connect to the Internet to view the installers and install new things
I'd also like to compile latex to have a Qt IDE installed but none are there for me
I download the Fedora 12 and updated from Fedora 11. After installing successful and restart, I can't find Fedora 12 selection on the Grub. I try to write it on the grub.conf, but it's still can't start the Fedora 12. code...
View 1 Replies View RelatedI had F15 installed in my hard drive, I liked it very much and everything was going great until I installed that damned XP in another partition (same HDD). Now here is the problem.
This XP does not let me choose the OS I wish to run at the boot-time and just boots itself. I am a beginner with Linux OS.
I've just updated my desktop to F13 using preupgrade but now grub won't boot it. The upgrade seemed to go OK, and none of the disk partitions should have changed as far as I'm aware, but now I get an error
VFS: Cannot open root device "UUID=xxx" or unknown block(0,0).
I'm new to these forums. I'm coming from using Ubuntu for a couple of years and now I'm trying to switch to Fedora.
I installed F10 yesterday and all went well, more or less. The system used to freeze randomly but after updating, everything seemed to work fine (I haven't tried audio yet, though).
I have an X1250 integrated graphics system that's working fine in Ubuntu. After playing around with F10 for a while I decided to download and install the latest ATI drivers from AMD's site. The installation posed no problems, but when I reboot the system it will come to a black screen at some point and freeze there.
I searched the web a little and came to this: http://www.fedorafaq.org/#radeon, but I'm not sure if that's current or old news. If it's current and those ATI drivers can't be installed, I'd appreciate some help about removing them.
I'm trying to install Fedora 10 from a USB memory stick on which i've installed Fedora-10-x86_64-DVD.iso and, early in the process of configuring the installation, i get messages about both my IDE hard drives having unrecognizable partition tables:
"The partition table on device sda (... my disk data ...) was unreadable. To create new partitions it must be initialized, causing the loss of ALL DATA on this drive."
Same for sdb.
My PC currently runs Fedora Core 4 (yes i know i should have gotten around to upgrading my OS earlier) and yes it recognizes both hard drives just fine.
The answers I've found on the web suggest to backup my drives and repartition. I'm not too hot on that "solution".
explain why a F4 partition table is not recognized by F10?
BTW, I've recently upgraded my motherboard, processor, DVD drive, regrouped both my IDE drives on the same bus, ... I consider it a miracle F4 still runs on this PC (although F4 does not support the motherboard's graphics card, so no X11).
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
I am trying to install Fedora12 on a usb hard-drive, the first problem I encountered was that the hard-drive would not boot stating "kernel panic: unable to create root device", this is just using the standard fedora 12 install and mostly clicking next (although I add my vista to the grub and tell grub to install to /dev/sdc which is the location of my usb hdd).
I have also tried livecdtousb (wont boot in stick and wont recognize removable hd as removable)
I have tried setting up disc encryption and installing with no LVM.
The drive has this same problem with ubuntu 9.10 however ubuntu 8.10 installs perfectly and I am guessing earlier versions of fedora will too. The problem is that I would like the kernel features of Fedora 12 (mainly modesetting) without this issue.
I have played about with grub and quite like disabling LVM and using the uuid of the drive to select the root partition, my boot partition has 500mb, I have a 2gb swap space 50gb ext4 root partition & 27gb fat32 partition code...
I am a linux newbie.
I had dual boot fedora 9 with windows XP before. Now I decided to change to fedora 11. I choose the option Replace existing linux while installing the fedora 11. My windows used to be in C drive while my linus in D drive. So I thought it would replace the D drive and remain dual boot.
However, after I reboot the computer, I realize that it can only boot linux. My windows partition appear as a File System in linux. code...
I have installed open office using yum install.
To install OpenOffice you can use yum like:
connect to the internet
open a console
su -
root password
yum install openoffice.org-base openoffice.org-calc openoffice.org-calc openoffice.org-draw openoffice.org-draw openoffice.org-writer
(all on one line)
This will install the man packages for Openoffice. To see all packages available for OpenOffice use:
yum list openoffice*
I am running fedora 14.
I have no openoffice icons on the desktop, or items in the menus.
I've installed the Awesome WM using "sudo yum install awesome" (as described here https://awesome.naquadah.org/wiki/Awesome-3-fedora ). I can also log into awesome, but nothing works! I can open the menu on the top left of the screen, but when I click on e.g. "Open Terminal", nothing happens. Same thing for all other menu options except "Shut down" which logs me out of Awesome. I've also tried the terminal shortcut, but nothing works.
Has anyone an idea how to make it work?
I have been using the same kickstart more or less since release 5.2 but it fails with 5.5. It looks like it is good all the way to the final stages. Does anyone know what has changed in anaconda for this release? I think the first boot process has changed as well.
View 5 Replies View RelatedI have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.