Networking :: FTP MLSD Command Fails In FileZilla
May 13, 2011
I have a problem with my filezilla (or my ftp server). When I want to connect to my ftp server (and also other ftp servers!), after MLSD command, I get a "Connection timed out" error.
Log:
Code:
Status: Resolving address of khanemashroote.ir
Status: Connecting to 46.4.196.109:21...
Status: Connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.4rc2 Server (Debian) [::ffff:46.4.196.109]
Command: USER badihi
Response: 331 Password required for badihi .....
Command: MLSD
Error: Connection timed out
Error: Failed to retrieve directory listing
View 1 Replies
ADVERTISEMENT
May 13, 2010
I have a "friend" who hosts a couple of websites that I maintain. I have always used filezilla client to connect and update the files on the website.I lost access for a little while and he said that "The profiles had accidentally been dropped".He reinstated everything but now I cannot complete a log on session. I maintain several other websites which have the same PURE FTPd server at their end and I can connect to these OK.The delicacy of the matter is that, with no changes at my end, and my other sites working, logic suggests that something has changed at his end. I have very patiently worked through all his suggestions but to no avail.I can't suggest that he is at fault when he claims expertise in the field and I am a complete lamer when it comes to FTP.
I wonder if anyone would be kind enough to review the log on result below and see if they can throw some light on the situation for me.(I have anonymised the IP address and other information for security reasons)
View 3 Replies
View Related
Jul 24, 2010
I'm having a strange issue with Filezilla that doesn't affect any other apps.I know my network isnt IPv6 friendly, so I've disabled it in Firefox and in Ubuntu - everything bar Filezilla finds and resolves addresses properly. Filezilla just gives me the responses below, trying to connect to 1.0.0.0:21 for any domain I try to FTP to. If I then go to terminal and do an ftp ftp.asdad.com etc, once terminal has resolved the domain, filezilla works - very odd. how I can stop having to do this step in terminal?
Status: Resolving address of ftp.xxxx
Status: Connecting to 1.0.0.0:21...
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Delaying connection for 1 second due to previously failed connection attempt...
Status: Delaying connection for 1 second due to previously failed connection attempt...
Status: Resolving address of ftp.xxxxx
Status: Connecting to 1.0.0.0:21...
View 2 Replies
View Related
Oct 15, 2010
I have a dynamic IP connection. so i got hostname on [URL]. Now i want to configure a ftp server with that. I am choosing following options in the network configuration wizard:
1. default transer mode: passive
2. use server's external ip instead
3. get external ip address from the following address: XXXXXX.dyndns.org
4. ask opearting system for a port
5. test result:
[Code]....
View 13 Replies
View Related
Apr 27, 2010
I have set up a local server for testing on my home network and installed openSSH. I can login using filezilla and SFTP and can even download files. Error messages saying cannot find directory (the directory I am trying to upload)?
Do I need to configure openSSH to allow this. I am using my usual ubuntu login. Maybe I need to set up another user for SFTP.
View 4 Replies
View Related
Aug 14, 2011
Desktop, laptop, both static IPs, can ping each other no issue. 10.04 LTS.Am attempting to transfer files using Filezilla (which worked when I tried it about two years ago!) and the overall response is 'No route to host'. I have scoured the interwebs and have found no solution. Pretty sure I'm putting in the correct details.
View 9 Replies
View Related
Dec 11, 2010
wonder if anyone might have a clue with this. i installed filezilla because i wanted a nice ftp client, but when i tried connecting to the server with filezilla, i get this:
Quote:Connection attempt failed with "EAI_NONAME - Neither nodename nor servname provided, or not known".
yet when i googled that, i mostly found hints that said "your hostname's invalid" or "check the spelling of your hostname". well, those aren't it. i can login to this ftp server successfully through both firefox and by using a gigolo-gvfs-thunar combo.i even uploaded a file with the thunar route. and nslookup is able to see it. so what's with filezilla? by the way, this ftp account of mine is very old....i've had it for probably 10 years, and haven't logged in for 5. i'm surprised it still works.
also, why am i trying to work with filezilla when i have gigolo-gvfs-thunar? because thunar locks up and becomes completely unresponsive for a couple of minutes whenever i try to do any ftp'ing with it, even though it works. if i even so much as click on a file in my ftp directory, i have to wait two minutes before the window comes back and highlights the file i clicked.
UPDATE: just tried connecting via ftp in the command line, and no luck. so apparently it's not just filezilla. maybe i just can't ftp directly to that host anymore? but if so, then why are firefox and gigolo able to connect? networking is not one of my strong points, so this is confusing to me.
update again whaddya know, maybe i'm slowly starting to get some brains when it comes to networking. though i won't say i "figured it out"....but i did make it work. i just used the ip address nslookup reported and was able to ftp to it with both filezilla and the ftp command line. i forgot to mention that i'm behind a firewall (my router), and i guess the hostname is not in the router's DNS, if my tiny understanding of routers is correct. but connecting to the ip address directly is apparently not a problem.
View 4 Replies
View Related
Jun 18, 2009
I have tried every variation I can think of to get an 'at' to rm a file after a certain amount of time.
echo 'rm -f /var/www/media/images/tempProducts/XYZ.png' | at now + 2 minutes
In php:
$apCommand = "echo 'rm -f " . $sTempName . "' | at now + 2 minutes";
exec ($apCommand);
I have:
- pasted the command into the command line as root and it works fine so it seems to be rights related -- rm gets scheduled and the file gets deleted after 2 minutes
- tried every variation of sudo within the statement including making sure that apache is listed in sudoers
- chmod to 777
- chown to apache
The rm command does get scheduled into the 'at' queue but the rm never removes the file.
at -c (without adding sudo to the 'at' statement)
#!/bin/sh
# atrun uid=48 gid=48
# mail apache 0
umask 22
[Code]....
View 3 Replies
View Related
Mar 22, 2010
dd if=/dev/zero of=/var/images/abc.img bs=1M count=0 seek=2097152 dd: truncating at 2199023255552 bytes in output file `/var/images/abc.img': File too large
The dd commad fails here saying its truncating if I try same command with less value for seek it works dd if=/dev/zero of=/var/images/abc.img bs=1M count=0 seek=2088960
0+0 records in
0+0 records out
0 bytes (0 B) copied, 2.1e-05 seconds, 0.0 kB/s
Whats the reason behind this and how can this be solved ? Note that there is 3.9T available on disk for the above commands to execute.
View 4 Replies
View Related
May 5, 2011
I have an ImageMagick command that is something like this:
convert "/path/to/photo" -set comment "(c) my company" -resize WxH miff:- | composite -dissolve 30 -geometry +40+138 -quality 80 "/path/to/logo.miff" - jpeg:"/path/to/photo_for_public"
Directory /path/to is mounted over NFS (same network). Some options of fstab that might be helpful:
Both rsize and wsize are 3kB
hard,proto=tcp,timeo=600,retrans=2
Sometimes the imagemagick command fails and produces no file (/path to/photo_for_public might not emerge after command execution). Files might be from 100kB to 10MB. We usually re-run the command for files not generated. Sometimes it fails even twice, so we do it third time (hilariously funny, but even a third run can fail).
Are there any thoughts what may be wrong with my photo-processing setup?
View 1 Replies
View Related
Jul 12, 2010
On Red Hat Enterprise Linux Server release 5.4, I enter the command:net time set -I 192.59.196.66Where 192.59.196.66 is the IP address of a Windows Server 2008 time serverThe response is:/bin/date 071218072010.20 failed. Error was (Success)The actual clock time does not get updated. However, evidently it did really communicate with the time server on 192.59.196.66, because the value in the response 071218072010.20 does correspond to the time on the time server, albeit in the somewhat bizarre format MMDDHHMMYYYY.SS.
View 1 Replies
View Related
Dec 26, 2010
I have a custom command I've made to quickly shut down all of my xen instances.
Code:
[root@LCENT02 ~]# virtdown
-bash: syntax error near unexpected token `2'
As you can see it fails when I try to run it on the command line. It is stored in an ~/.env file in my home directory. What is odd to me is if I open the .env file and copy the command from there and paste it into the command line, it does actually work!
Code:
[root@LCENT02 ~]# for i in `virsh list | grep -v -e Id -e --- -e Domain-0 | awk '{print $1}'`; do virsh shutdown $i; done
Domain 1 is being shutdown
Domain 2 is being shutdown
Domain 3 is being shutdown
And this is how I have the command entered into my .env file:
Code:
alias virtdown="for i in `virsh list | grep -v -e Id -e --- -e Domain-0 | awk '{print $1}'`; do virsh shutdown $i; done
Why would this command work if you paste it onto the command line but not use the custom command virtdown?
View 1 Replies
View Related
Nov 18, 2009
I installed FC 12, 64 bit yesterday. I downloaded open office and unpacked it. I then issued the command rpm -Uvh *.rpm this fails due to many dependencies Some of these are:
[Code]...
how to "link" or make these and presumably other libraries searchable.
View 1 Replies
View Related
Mar 8, 2010
Ubuntu Server 8.04. I have 2 servers in the same rack, on the same subnet, using the same DNS servers and build with the same media. On one of them the following command fails
Code:
apt-get install squid
On the other on the package was installed with out any problems. I have checked the /etc/apt/sources.list files and they are identical. Actually, it could not find mutt either.
View 5 Replies
View Related
Feb 19, 2011
Having an odd problem running a mysqldump via crontab. I have the script running on other servers and they work fine, so not sure how to actually troubleshoot, but the script looks like the following;
If I run it as a cronjob as root, it finishes in a second and a 20k file is there. If I run it from the command line as root it does the backup (takes a few minutes) but does complete the backup and can be unzipped and read successfully.
View 3 Replies
View Related
Mar 31, 2011
Here is my script for at command. The intention is to get itself executed every minute.
Code:
logfile=/tmp/attest.log
loginterval=1
[code]....
View 4 Replies
View Related
May 26, 2010
I've writte a small Munin plugin using python, which basically runs a shell command, and write the output to a file. For some reason the script fail quite often, and it seems to be failing at the "commands.getoutput" statement. This is what's leading up to that statement:
[Code]..
View 4 Replies
View Related
Dec 20, 2009
How can I install the dict file to look works?
I am running SUSE 11.1
Here is the error:
View 2 Replies
View Related
Dec 2, 2009
I've successfully mounted a network share with mount.cifs for the past 2 years using fstab with credfile.
[Code]....
Yesterday I moved this system to a new datacenter, but did not alter fstab or the credfile. The //server/share directory has IP rules in place, but this was updated with the new system IP while we moved the system. Now, I am mysteriously unable to automount //server/share. The local error is 13 (permission denied). The Windows server we are mounting returned a code that is defined as "username is valid but password is incorrect" Again - no changes (content or permissions) were made to my credfile or fstab entry. I've restarted netfs a few times, including rebooting the system twice. What is baffling is I can successfully mount //server/share via command line: Code: mount -t cifs //server/share /mnt/mycooldir -o username=foobar,password=1234
The username and passwords are identical in credfile and the mount options - I copied & pasted username / password from the credfile itself.
View 2 Replies
View Related
May 14, 2010
what the command is for the System Tray, so thought I'd ask here. Note I am not asking how to put a system tray on the panel - I know I can add a notification area, but when I reboot there will be 2 of them, so this is not what I want.
I just need to be able to initialise it when it fails to load. Since my upgrade to Lucid, this has happened a couple of times, so expect it will happen again soon enough.
View 8 Replies
View Related
Jul 22, 2010
I'm trying to build the package zaptel on debian, but I'm encountering two errors:
1- When I try to run the "make menuselect" command, I get an error stating that I need ncurses which is missing. I tried to get it installed but didn't get to do it yet.
2- After that, there's the command "make" I think it's to build the package. Yet again this fails, and the error I get is "you do not appear to have the sources for the 2.6.26-2-686 kernel installed".
View 3 Replies
View Related
Jun 30, 2011
I am trying to fix a perl script, and I really suck at perl. But I think this problem will be easy for people who know it.
The problem is, I have an old setup script someone wrote many years ago. It fails if the standard shell is dash and not bash. The only way I've gotten it to work is to point /bin/sh to bash. I looked thru the script and it uses "system" many places, and I think that's the problem.
I searched for it and found this link:url
My plan is to include this function:
Code:
sub system_bash {
my @args = ( "bash", "-c", shift );
system(@args);
}
Then I could simply change all calls to system into system_bash and it should work?
The parameter to the system calls is usually some variable. What if the parameter is a list already? Do I need to test for it somehow, and if it's a list, prepend "bash" and "-c" to the list? How do I do that?
In the script there are lots of places like this:
my $error = system($cmd);
if ($error) {
die/warn "some error message";
}
Shouldn't there be a return in the system_bash function?
View 8 Replies
View Related
May 29, 2011
I want to install filezilla in F15 Or recommend me other good ftp application.
View 5 Replies
View Related
Jan 10, 2010
I installed vsftpd and edited the config. file according to the instructions. I restarted the process. I then installed FileZilla.
I input 127.0.0.1 as my host name, my username and password, and port 21. Connection is successful for a few minutes until I get a 421 Timeout and the connection closes.
While still connected, I have attempted to run the network configuration wizard, only to find a few hitches. The furthest I got was when I had the wizard acquire my IP address from the website (I do have a dynamic IP), and when I manually input port 50000-50050 for it to use, because I have forwarded them on my router.
The test gets quite far, and only fails at this juncture:
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
What could be going on? I double-checked that my ISP allows FTP on port 21, and all seems good to go.
View 9 Replies
View Related
Mar 19, 2010
Ive just insalled Ubuntu 9.10 and installed Filezilla from the Ubuntu Software Centre, however this is only version 3.2.7.2. How do I update this to 3.3.2? Ive downloaded the tar.bz2 file and extracted it in Downloads but how I do install it from here?
View 9 Replies
View Related
Jul 26, 2010
I'm on Ubuntu 10.04 Lucid. At the moment, the current version of filezilla in the software center is 3.3.1. That version has some known bugs, and the current version of filezilla at their website is 3.3.3 (released more than a month ago). How can i update filezilla? FIlezilla tells me to use software manager, but 3.3.3 isn't there yet. Moreover, they only release the source code without a deb package..
View 7 Replies
View Related
Sep 24, 2010
Does any body knows ahy filezilla closes when openning a new tab??
My box is Ubuntu 10.04 LTD 64bits, Compiz enable, Gnome.
View 1 Replies
View Related
Dec 28, 2009
how to install filezilla on CentOs ? I did it easy on fedora, but cant do it on CentOs or maybe there is another good graphical ftp client for CentOs ?
View 6 Replies
View Related
Sep 12, 2015
I have been trying to install Filezilla on a virtual server and my laptop. Both are running Debian 8.1 Jessie. The former is running the 4.1.5 kernel and the latter 3.16.0.
running Code: Select allsudo apt-get install filezilla
installed filezilla on the virtual server. It fails on my laptop:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package filezilla
Code: Select allaptitude search filezilla
and Code: Select allapt-cache search filezilla
brings up nothing.
I assume I must simply add the apt repository. I have only managed to find a repo for Ubuntu at [URL] ..... I don't know the differences (if any) between packages in Ubuntu and Debian but since the repo describes itself as having been ported from Debian, I assume there are differences.
I have downloaded the filezilla package from the Filezilla site [URL] ...., but every reference I find to installing Filezilla on Debian discusses apt-get so this is my preferred option.
View 3 Replies
View Related
Jan 14, 2010
I would like to know if there's a way of using FileZilla or another FTP client without having a web page. My intention is to have my files on a server and download them form time to time from different computers using FileZilla's portable version. It would also serve as a Back-up copy of 'em. If there's no way of doing that, I can get a subdomain from, that is free and without a file limit?
View 4 Replies
View Related
