General :: Proftpd Fails On Boot Saying "MasqueradeAddress: Unable To Resolve Rowilson.dyndns.org"
Mar 21, 2011
I have proftpd set up on my linux home server. As I have a dynamic IP at home, I am using DynDns.org to provide a hostname for me. I have told proftpd to use this address as the MasqueradeAddress, to allow passive FTP connections through my NAT router.
However, whenever I boot my server, proftpd fails to start saying it cannot resolve this address. I assume this is due to the boot order, as something network or DNS related hasn't started up by then and it can't find the address. How should I deal with this problem? Can I get proftpd to do its checking for the address later on? Or can I change the startup order so that proftpd is started as the final item in the boot sequence?
View 1 Replies
ADVERTISEMENT
Jul 28, 2010
I have a laptop with Windows 7 and Ubuntu installed in seperate partitions. When I boot up the computer I get options to boot either in windows 7 or Ubuntu. Yesterday I updated Ubuntu to 10.4 version. I have been having issues with grub rescue, which was rectified an hour ago. Now I can boot up into windows 7, but when I try to boot into Ubuntu, I get a GRUB screen as below code...
View 1 Replies
View Related
Jul 22, 2010
I finally have my system to where I can connect to proftpd but my uploads fail. I think my problem lies in the upload folder. I do not really understand where to put it. Will someone look at this config file and tell me where to put it and what I need to do to get it working. A basic anonymous configuration, no upload directories.
[code]...
View 14 Replies
View Related
Aug 4, 2010
Proftpd is installed and running fine on 8.04 server. I want to streamline the process of adding users. Adding a ftp user with USERADD fails (user is created but connection fails when trying to connect with ftp client).
Code:
useradd -d /ftp/ftphome/myuser -g ftp -m -p mypassword -s /usr/sbin/nologin myuser
But, ADDUSER works:
Code:
adduser myuser
usermod -d /ftp/ftphome/myuser -g ftp -m -p mypassword -s /usr/sbin/nologin myuser
It's a bother because I want to automate the process, and ADDUSER has all those prompts and asks for the password twice.
View 2 Replies
View Related
Dec 30, 2010
I've recently installed Proftpd to host for someone for a couple of hours.
With the default config it works however when taken the comments out and edited for anonymous, proftpd fails to start
This is the default config file which works if you have a user and password for my machine, but anonymous wont work (when the comments were removed).
View 1 Replies
View Related
May 15, 2011
I have $ uname -a
Linux kub 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux
Most of the time when I boot my PC I get an error about fsck.ext4: Unable to resolve... I don't know why it's happening.
The problem is happening with my external drive that has 3 partitions:
/dev/sdc1
/dev/sdc3
/dev/sdc2
About 90% of the time I boot I do get the error. Sometimes after getting the error I can login and the external drive (/dev/sdc) is already mounted:
$ df -H
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 15G 8.0G 5.8G 58% /
tmpfs 1.9G 0 1.9G 0% /lib/init/rw
udev 1.9G 246k 1.9G 1% /dev
tmpfs 1.9G 738k 1.9G 1% /dev/shm
code....
The UUID's in the error file match the output of the command blkid. And the UID's of blkid match the fstab UUID's. I don't know what to do at this point.
View 2 Replies
View Related
Sep 7, 2011
I am unable to install proftpd-basic:
The following NEW packages will be installed:
proftpd-basic{a}
The following partially installed packages will be configured:
proftpd proftpd-mod-ldap proftpd-mod-mysql proftpd-mod-pgsql
0 packages upgraded, 1 newly installed, 0 to remove and 13 not upgraded.
[Code].....
View 1 Replies
View Related
May 16, 2010
I am still pretty new to centos, and I am having some trouble figuring out why after installing proftpd I can't log in. I am running Centos 5.4 i386. I have gone through and installed the rpm forge and updated yum. I have installed proftpd.i386 0:1.3.2-1.el5.rf With a user name I know works through SSH I am unable to connect to the server on port 21. It makes a connection, but the authentication fails saying that the user name and or password is incorrect.
I opened port 21 to my server on my router, and Just for testing, I have disabled iptables. In the /var/log/secure log I find the following error when I try to connect. [ps: I changed the user name in the log to USERNAME to avoid giving out my id. Also changed the ip I am connecting from to MY_IP_ADDRESS]
May 15 22:43:38 webserver proftpd: pam_unix(proftpd:session): session opened for user USERNAME by (uid=0)
May 15 22:43:38 webserver proftpd: Deprecated pam_stack module called from service "proftpd"
View 6 Replies
View Related
Nov 15, 2010
There seems to be some problem in my dns server.
The configuration is perfectly ok.But what happens sometimes is,
it couldn't resolve some domains sometimes.After restarting the
named,it again resolves the domain.
whats happening on my dns server
View 10 Replies
View Related
Feb 8, 2011
I am unable to get any sound from my speakers I know they work because I have windows 7 on the second hard drive and they work, however, not using Ubuntu 10.10. I looked at the propriatory drives and it isn't there my sound card is a Realtek High Definition Stereo ALC260 can anyone Help. Please keep it simple as I am a newbie to Linux and I find it confusing at times.
View 2 Replies
View Related
Mar 31, 2011
actually i am new for this forum and for Linux also. i am using redhat enterprise Linux 5 its not licensed. i am having so much dependency issues is there any way by using which i can resolve dependencies. and i am already made repository. but till i am facing the same issue for any rpm.
View 1 Replies
View Related
Apr 1, 2011
Fstab:
UUID = A / ext4 defaults 1 1
UUID = B /stor ext4 defaults 1 2
UUID = C swap swap defaults 0 0
and the error is:
fsck.ext4: Unable to resolve UUID = B.
Fdisk -l:
/dev/sda1 (boot) linux
/dev/sda2 linux swap solaris
/dev/sda3 linux
[code]...
View 4 Replies
View Related
Feb 12, 2010
The proprietary drivers that came with my ubuntu 9.04 installation are not doing their job. My cpu is managing my graphics (compiz-fusion, and a 3d obj running in the background) and I alway have a core of my phenom processor close to 100. I have an ATI 4870 gpu with 2gb internal ram on the card. Also, recordmydesktop, electric sheep, and any other simple graphics all lag. 3d games on the other hand have no problem. I decided I would try the driver I downloaded from AMD. I removed the proprietary driver, ran...
Code:
sudo sh ./ati-driver-installer-10-1-x86.x86_64.run --buildpkg Ubuntu/jaunty
and I get
Code:
Created directory fglrx-install.lPNHYh
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.69 .....
/bin/sh: execstack: not found
make: *** [binary-install/xorg-driver-fglrx] Error 127
dpkg-buildpackage: failure: debian/rules binary gave error exit status 2
Removing temporary directory: fglrx-install.lPNHYh
How to make the proprietary driver work better I'm all for that to.
View 3 Replies
View Related
Jun 10, 2011
I have installed Linux 5.6 in my home PC, i tired to use internet connection its failed to connect. Whereas i am able to work in windows XP.
In Linux:-
i am not able to ping any sites.
i am using BSNL Broadband connection.
i have enable the option DHCP (IN DNS Configuration) to obtain an IP automatically from the ISP.
/etc/resolv.conf file looks like
search localhost
nameserver 192.168.1.1
View 5 Replies
View Related
Apr 29, 2009
It seemed that it would be simple enough: take the 'f' option in the expert menu of fdisk to put partitions in order after a gap had been created by a deleted partition and then make corresponding changes in /boot/grub/grub.conf because the root partition was shifted.
Well, it didn't work out that way. No matter what I try, I either see the error 15 at Stage1.5 or the error 28, which is even stranger (file does not fit into memory). All this before I even see a grub menu. It just does not get that far.
Does anyone want to take as stab at guessing what might have happened here and whether I have a chance at recovering without having to reinstall? I can provide concrete data, if anyone would be kind to give it a try. Hoping that this is a known problem and something can be guessed from what I stated here but I can be as specific as needed, just don't want to generate noise if there are no takers.
View 3 Replies
View Related
Feb 13, 2011
Sometime, I got the error messages as I mentioned in the subject:
Quote:
Feb 14 07:46:48 x proftpd[27487]: x - Fatal: unable to open incoming connection: Transport endpoint is not connected
I'm sure there are some clients connect to server at that time. What does this mean exactly? Why did it happen? Below is my configuration file:
Code:
ServerName"ProFTPD server"
ServerIdenton "FTP Server ready."
ServerAdminroot@localhost
[code]....
View 3 Replies
View Related
Apr 19, 2010
I followed the following two articles to create a bootable USB key that will run the Kaspersky Rescue Disk, but both methods fail, using two different USB keys:
UNetbootin - Create Bootable Live USB Disks For A Variety Of Linux Distributions From Windows Or Linux : "Determining root device: Could not find the root block device in ."
Creating Bootable Kaspersky Rescue USB Disk : "Could not find kernel image linux"
Kaspersky only provides support for when trying to boot from a CD. Does someone know what I could try to get this to work as shown in the articles?
View 4 Replies
View Related
Jan 9, 2011
I have an application in my company PC running on Fedora Linux.Can dyndns be used to access from outside world?
View 5 Replies
View Related
Jul 24, 2010
I'm having a strange issue with Filezilla that doesn't affect any other apps.I know my network isnt IPv6 friendly, so I've disabled it in Firefox and in Ubuntu - everything bar Filezilla finds and resolves addresses properly. Filezilla just gives me the responses below, trying to connect to 1.0.0.0:21 for any domain I try to FTP to. If I then go to terminal and do an ftp ftp.asdad.com etc, once terminal has resolved the domain, filezilla works - very odd. how I can stop having to do this step in terminal?
Status: Resolving address of ftp.xxxx
Status: Connecting to 1.0.0.0:21...
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Delaying connection for 1 second due to previously failed connection attempt...
Status: Delaying connection for 1 second due to previously failed connection attempt...
Status: Resolving address of ftp.xxxxx
Status: Connecting to 1.0.0.0:21...
View 2 Replies
View Related
Feb 16, 2011
Running Vista and recently d/l Linux 10.04 with Vista default.
Want to make linux default but when I go to startup manager and select Linux and reboot Vista remains the default.
View 5 Replies
View Related
Mar 30, 2011
I am trying to remotely update my dyndns using the commandwget --no-cache h ttp //$USR:$PWD@$DYN_HOST/nic/update hostname=$HST&myip=$MY_IP(the h ttp : // is because I can't post links yet...)when "MY_IP" is my remote computer's ip,but the dyndns seems to ignore this parameter.. It updates the "real" ip that I have in the computer that running that command..I read previous threads an saw that someone used --no-cacheSo I tried that and it did not work for me.
View 1 Replies
View Related
Dec 5, 2010
Did a new install of F14 on a T61 Thinkpad w/ Motorola DSL router (ATT supplied). The install was smooth and had no indications of problems.
When I went to use the browser, it showed a functional Fedora website. But if I try to go to goggle or any other web address, the browser complains that it can't resolve the web address.?
View 2 Replies
View Related
Jan 27, 2011
After clicking to install notified updates, I receive the following message...code...
View 9 Replies
View Related
Sep 1, 2011
I've searched the interwebs and have never had this problem before but I can connect with ssh no problem. The problem arises when I try to connect with sftp. I get code...
View 1 Replies
View Related
Apr 12, 2011
As part of instructions from Slackware Installation site, I am trying to make a boot file from the ISO (10.2VER). The command given: 'dd if=[image file name] of=/dev/fd0'
Tried image file 'bare.i' and also 'pportide.i'
Error from Red Hat OS: "opening 'pportide.i' no such file, directory" Also tried 'C:>RAWRITE bare.i a:' from WinXP command line with negative result.
Slackware help site:
'http://www.slackware.com/install/bootdisk.php'
I have not seen a command w/ 2 = symbols??
Installing to stand-alone desktop, PATA IDE Controllers. (ISO was copied with process: 'image burned to disk').v
View 9 Replies
View Related
Sep 24, 2010
I can't boot to a choice of guis in OpenSuse 11.3
can anyone advise me on my next move? code...
View 5 Replies
View Related
Jan 23, 2011
Is it possible to open dyndns port at iptables?I have a remote server which is cenots 5.5 x86 and uses iptable rules. And my local pc is windows 7 x64 and have a dyndns address as mypc.dyndns.org.I want to connect local pc with mypc.dyndns.org to remote server with iptable rules as follows.Quote:
# Xmanager
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 6000:6010 -s mypc.dyndns.org -j ACCEPT
[code]...
View 2 Replies
View Related
Dec 18, 2010
I originally uninstalled KMail but now i would like to try it out again and get more familiar with it.
Problem is, since i upgraded to KDE 4.5 i can't.
There is always some dependencies issue. code...
View 3 Replies
View Related
May 8, 2011
I downloaded ubuntu 10.10 iso, made CD, installed as dual-boot with win Vista home premium and used it for a week to access the 'net and email. Yesterday, while deleting an email, the "d" key stuck down while I was issuing <CTRL>D and the cursor froze. I then rebooted by using the reset button and saw many lines of text including "kernel panic". so I reset and booted into 'repair boot'. Again, many lines of text which stop at the same place if I try this twice.
I assume I've fried my ubuntu install and would like to fix or re-install it. When I installed it, I let the [wubi?] installer make decisions except choice of drive because it picked the external, USB drive. It appears to've used about 80 G on internal drive D: I could boot from the distro CD and see if it will re-install but I'm concerned that I may not fix my problem or that it may mess up my windows installation.
View 3 Replies
View Related
Jan 22, 2011
I have a Dell Precision 330 with (the latest) A09 BIOS and 1 TB SATA hard drive. There is a SATA-IDE converter between the SATA HD and the ATA133 cable. The OS was Window XP Professional SP3.
When adding RH Enterprise Linux 6 onto the computer, I created two additional partitions, one 400 GB for Linux's storage and a 10 GB swap space. I chose Window XP as the default OS.
After the installation, when the system started up, I can hit a key to have two optional OS: Window XP and Linux. If I chose Linux, the system would boot up. If I chose Window XP, the boot failed with a message that windowssystem32configsystem was missing or corrupted. I read some articles that the problem can be fixed in window's recovery console with fixboot. After entering the fixboot command and restarting the computer, Window XP still failed to boot with an error message that another file was missing.
I thought I might have made some mistakes in the installation procedure and it would be cleaner to reinstall both OS. So I tried to install Window XP Professional again. Unfortunately, after booting from Window XP CD and formating the MBR and copying the window XP files, the computer can not restart with the installed XP. Instead, the computer boot from Window XP's CD repeatedly. If I remove Window XP's CD, the computer simply can not boot at all.
I began to wonder whether RH's Enterprise Linux made some change on the MBR of the HD that Window XP can not format.
View 11 Replies
View Related
