Every time I try to install something, be it by the terminal, synaptic, or ubuntu software center, I get this error.
[code]
dpkg: parse error, in file '/var/lib/dpkg/available' near line 13789 package 'gnome-media':
`Depends' field, invalid package name `libatk1.;-0': character `;' not allowed (only letters, digits and characters `-+._')
E: Sub-process /usr/bin/dpkg returned an error code (2)
[code]
i can click on place and system and anything else but when i try to open application by just clicking on it i get froze for a minute and i can not open it i got ubuntu 10.4
View 1 Replies View RelatedMy hard drive apparently has errors, according to my Windows 7 installation. ._. So I am going to restore to factory settings. First question - Will factory setting make me lose my Anytime Upgrade? If so, is the key that was in the anytime upgrade box re-useable? Second Question - Under the chance that I have data loss once setting up my Ubuntu-Windows 7 Dual boot system, will I lose my anytime upgrade, and is it re-usable?
View 5 Replies View RelatedOkay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.
Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
I am quite new to Linux. Just some basic information, I am using windows xp but have installed vmwork station and am running Red Hat enterprise linux 4.
When i run ./configure it gives me this error. "configure: error: libnet >=1.1.2.1 not found "
i try today to install Firestarter , unfortunately i got some problems regarding of the following messages:
1- insufficient privileges :
2- how can i change and save the file /etc/sbin/firestarter with visudo cammand
3-i got this message when i try to run it through terminal Error reading /proc/net/ip_conntrack: No such file or directory
i need to install nagios-plugins 64 bit, when i tried to install via yum i got this error yum install nagios-plugins.x86_64 yum error Unsatisfied dependency i hv installed openssl 32 bit but it needs openssl 64 bit, even php and perl. i tried to to install via yum yum install openssl.x84_64 but its not getting installed i tried to uninstall openssl but its shows so many packages to remove
View 4 Replies View RelatedI've tried to install Wine but I get this error: [Errno 14] HTTP Error 400 :http://linuxdownload.adobe.com/linux...ata/repomd.xml Trying other mirror.Error: Cannot retrieve repository metadata (repomd.xml) for repository: adobe-linux-i386. Please verify its path and try again Not sure what is happening here. Can anyone give me some idea and maybe a way to overcome it?
View 4 Replies View RelatedGreetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI need handbrake software so badly so I went to alien's slackbuild to download the handbrake.However,it ends with error after compiling-
Does it mean i miss something of gtk?
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
I tried to install ubuntu 9.04 from wubi in windows 7 ultimate today. But it failed. I met a problem when installing: An error has occurred setting the element data. The request is not supported. The detailed information in installation log file is:
>>stdout=
01-26 13:29 DEBUG TaskList: # Cancelling tasklist
01-26 13:29 DEBUG TaskList: New task modify_bcd
01-26 13:29 ERROR root: Error executing command
>>command=C:WindowsSystem32cdedit.exe /set {d29666c7-0a4d-11df-a945-002268e2b352} device partition=I:
>>retval=1
>>stderr=An error has occurred setting the element data.
The request is not supported.
[Code].....
The request is not supported. I tried to use bcdedit /set <GUID> device partition=I: manually, but still have the same error.
I am on 10.10 using Gnome 2. When I go to install GIMP via Terminal, SPM or USC I get an error about not being able to install libpoppler-glib4. Odd thing is I have the updated version.
View 6 Replies View RelatedI'm trying to install alien on an Ubuntu 10.0.4 server, which happens to be a virtual host on an ESX 4 Vmware server, in case that matters.I have a lot of experience with various Unixes over the years, especially Solaris, but we're just getting going with Linux servers here.
dstrom@webserver:~$ sudo apt-get install alien
[sudo] password for dstrom:
Reading package lists... Done[code]............
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
View 8 Replies View RelatedI did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies View Relatedi try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
I am not able to install 11.3 x86_64 on an OCZ 120 GB Agility 2 SSD. I receive a system error -3030 when it tries to format the drive. If I use go into rescue mode and either format or partition the drive, the installer crashes.
View 3 Replies View RelatedI would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
As root, type "zypper update" and get several lines of the following error:
**
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
Loading repository data...
Reading installed packages...
Nothing to do. Used zypper dup to upgrade from 11.3. Still have boot problems (will open another thread), but had major problems upgrading timezone. File downloads would reach some percentage of completion, then B/s would slowly reduce, to zero. Upgrade would halt until manually aborted. Solution was to manually download 5 timezone files and install them in a directory repository. File download did not specify just the timezone file, but also a part of the directory. Could this be part of the problem? example: ./rpm/i586/timezone-2011d-0.2.1.i586.rpm instead of just the file name.System is a Dell 3000 (Pentium 4, 512MB memory).
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View RelatedI'm trying to install amarok from git but I keep getting this error:
[code]...
I thought libXext provided shape.h but I have both xorg-x11-libXext and xorg-x11-libXext-devel installed.
[code]...
I just downloaded OpenSUSE 11.4. After burning the iso and trying to install I get a "cannot exec bcedit.exe" error and the install fails. Has anyone else had this happen and what do I do now?
View 3 Replies View RelatedI've just installed 11.2 Gnome 64 bit and after applying the updates and when it gets to finding server it says all are too slow and I get this Error 5:Connection too slow... no server available, aborting. I hit ok and it disappears.
View 1 Replies View RelatedI tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:
md0 /boot
md1 /
md2 swap
or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)
I am trying to install a Java based game to try it out and i keep getting a crash report can anyone assist me with getting this to work?
Code: Unexpected crash while launching login The error was: <null>
It's possible you might figure out what's wrong from the log file below.
Contents of temporary launch log:
Time is Mon Mar 28 06:40:58 EDT 2011
Running client version 2.7.5g
System information:
Executing from /home/jerry/Documents
Operating system: Linux (arch: amd64, version: 2.6.37.1-1.2-desktop)
Java version: 1.6.0_20 (Sun Microsystems Inc.) <http://java.sun.com/>
Jvm version: 19.0-b09 (Sun Microsystems Inc.) [OpenJDK 64-Bit Server VM]
Available CPUs: 2
Main thread exiting.
CLIENT CRASH
I was trying to install VirtualBox from AUR [URL]... it wants libpng12, which is outdated and makepkg cannot install it. Whan should I do? Here is what happens:
[code]...