OpenSUSE Install :: Error Appeared Stating That Disc Image Was Not Burnt Due To Some Error
Dec 29, 2010
Okay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.
Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.
View 9 Replies
ADVERTISEMENT
Jul 22, 2011
I have downloaded the opensuse 11.4 64 bit iso both as a direct download and as a torrent, and the md5sums for both iso images are fine.
I tried burning both, and for both of them they fail the checksum installation media test for the actual dvd.
(dvd title openSUSE-DVD-x86_640024)
I burnt them on a 32 bit Pentium 4 machine running suse 11.3, and am trying to install on an Athlon 64 3000+.
This may well be a stupid question, but do you have to burn a 64 bit iso image on a 64 bit machine, or should I be able to burn it on a P4 ok?
I should add that I had tried installing one the dvd's first, and got a lot of failed packages and ended up aborting the install.
View 3 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Jul 12, 2009
The [Errno 14] HTTP Error 404: Not Found error appeared again today, while trying to update the system. No mirrors available.
View 14 Replies
View Related
Dec 28, 2009
I am attempting to do a new install of OpenSUSE 11.2 x86-64 by burning a network install disk. I am having trouble getting it to work on my hardware however. Whenever I boot up with the disc, I get a "image checksum error." I have tried to redownload the image and also reburn it. The disc will boot in VirtualBox but will not boot on the machine. I do not understand what could be causing this because the CD drive in the machine is working just fine.
View 1 Replies
View Related
Jul 26, 2011
i used the terminal command: 'wine /media/INSTALL/install.exe' and I got "Please insert the CD labelled 'install Disc'" (even though the install disc was in the drive. I even tried the other discs. I tried searching another thread on another forum where a Fedora user had the same problem, which was solved, but it doesn't work for me for some reason.
View 2 Replies
View Related
May 9, 2011
Always when i attempt to download any software, an error message opens stating that adobe 8 cannot read it. when saved in downloads clicking open does not function and i cant find an uninstall for the adobe reader 8. I cannot get any anit-virus protection, problem compounded by having no cd input.
View 3 Replies
View Related
Mar 28, 2010
I have currently installed Xubuntu via wubi on my windows XP. When I try to boot, it displays an error message stating that wubildr.mbr is missing or corrupt and I cannot boot into xubuntu.
View 2 Replies
View Related
Nov 7, 2010
my friend using XP and it was closed because he didnt activate it . he want to try Linux , i adviced him to use UBUNTU 10.10 ,but after we order the boot we got a loading screen for ubuntu then this error appeared
[code]...
also , the labtop cannot boot from usb coz no option for that in BIOS. what can i do to solve each problems?
View 2 Replies
View Related
Jan 13, 2010
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies
View Related
Nov 6, 2010
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
View 1 Replies
View Related
Jun 9, 2011
I'm trying to setup a keyboard-command to open my downloads folder. Simple enough. To get things started off I did $ gnome-open /home/user (my name where user is) and it opens my user home directory. But when I get to adding downloads to the end of it it gives me this $ gnome-open /home/user/downloads Error showing url: Error stating file '/home/User/downloads': No such file or directory As far as I can tell there is most obviously a downloads directory in my user folder. I also get this error when trying to open any other home folder, like music, or pictures.
View 3 Replies
View Related
Jan 1, 2011
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
View 9 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
Nov 1, 2010
I have wordpress server running on my machine and I have SELinux enabled for enforcing/targeted. I am unable to insert images, music, etc from the add new post field on the wordpress dashboard. I receive the following error:
image.jpg has failed to upload due to an error The uploaded file could not be moved to /var/www/html/wordpress/wp-content/uploads/2010/10. When I disable SELinux completely, it works fine. Does anyone know what Boolean I need to check to resolve this issue?
View 4 Replies
View Related
Sep 9, 2010
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
View 2 Replies
View Related
Oct 4, 2010
Anyways, to my question. Recently when I have been clicking right click an image of what I clicked has appeared that will not go away. I have an example here:Logging out helps until I right-click again.
View 1 Replies
View Related
Oct 12, 2009
Machine is a Dell PE 1750. Previously running 5.2 or 5.1 32 bit. Tried to install 5.3 i386 but getting this error,
Error An error occurred transferring the install image to your hard drive. You are probably out of disk space.
Click ok Install starting Starting install process. This may take several minutes. Exception Occurred
Traceback (most recent call first ):
File
"/tmp/treedir.14202/instimage/usr/lib/anaconda/yuminstall.py", line 711, in _run
self.ts.ts.scriptFd = instLog.fileno()
[Code]...
View 4 Replies
View Related
Apr 22, 2010
I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies
View Related
Aug 25, 2010
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
View 2 Replies
View Related
Jul 13, 2009
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
View 8 Replies
View Related
Mar 31, 2011
As root, type "zypper update" and get several lines of the following error:
**
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
Loading repository data...
Reading installed packages...
Nothing to do. Used zypper dup to upgrade from 11.3. Still have boot problems (will open another thread), but had major problems upgrading timezone. File downloads would reach some percentage of completion, then B/s would slowly reduce, to zero. Upgrade would halt until manually aborted. Solution was to manually download 5 timezone files and install them in a directory repository. File download did not specify just the timezone file, but also a part of the directory. Could this be part of the problem? example: ./rpm/i586/timezone-2011d-0.2.1.i586.rpm instead of just the file name.System is a Dell 3000 (Pentium 4, 512MB memory).
View 5 Replies
View Related
Jan 10, 2010
I see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
View 2 Replies
View Related
Apr 25, 2011
I've been trying all week to get mpg to dvd, my dad has a video that is supposed to be aired on television soon and the deadline to have it in is tomorrow. right now i have it as an mpg file and i cannot get it to burn to dvd. I've tried using devede and Gnomebaker, but everytime i put it in the dvd player it says disc error.
View 9 Replies
View Related
May 20, 2011
Trying to burn a DVD full of media and I keep getting errors on both above programs. Here is the error oupout I get from Brasero:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]......
Session error : An error occurred while writing to disc (brasero_burn_record brasero-burn.c:2862) Anyone know what I can do to fix this and get things up and running again? Would like to be burning to DVD's again. Running 11.04 and also had the same problem with 10.04.
View 9 Replies
View Related
Mar 3, 2011
I was given a CD for work purposes and when I put the disc into the drive I get 2 disc icons on my desktop. One has data (a pdf file) and the other has serveral audio tracks. I tried to use dd to image the disc but it gives an input/output error immediately without copying anything. If I try to use brasero or k3b to copy the disc it only copies the audio portion. The data portion does not show up in the drop down to copy - only the audio. If I right-click the data (or audio) desktop icon and select 'copy' from the shortcut menu then it creates an image of the audio portion.
for dd i tried:
dd if=/dev/cdrom of=/home/username/test.iso
This give an immediate error with no data written to the iso file.
dd if=/dev/cdrom of=/home/username/test.iso bs=2M conv=notrunc,noerror
This copies a small amount of data to an iso file but it wasn't usable.
View 3 Replies
View Related
Aug 18, 2010
I tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
View 5 Replies
View Related
Mar 3, 2010
It seems I can't burn any kind of disc (cd/dvd, audio/video/data) usgin my internal sata burner (sr0). I treied googling around and reinstalling everything from dvd+rw-tools up but the error is still there. the burner works fine with windows on the very same pc (dual boot). I tried different media and different speeds. when using an usb burner everything's fine...
[Code]....
View 5 Replies
View Related
Nov 15, 2010
Pavillion laptop crashed and I can not find all of my recovery discs. The computer will not allow me to do an internal recovery so I ordered a recovery download on line and burned to a disc. when I put the disc in the graphics came up and in started in Live-mode but then the error mess came: error while loading shared libraries: /usr/lib/libpci.so.3: cannot read file data: input/output error. The site said it was an ISO file but then it had a program it had me run to change it and burn the disc.
View 1 Replies
View Related
May 14, 2010
I know i get the error code because i dont have my windows partition. But i seriously need my vista back. I tried using VMware player but it didn't work. Is there anyway i can restore my windows partition without the installation disc? The restore disc does not work as it needs a windows partition.
View 7 Replies
View Related
