I've just installed 11.2 Gnome 64 bit and after applying the updates and when it gets to finding server it says all are too slow and I get this Error 5:Connection too slow... no server available, aborting. I hit ok and it disappears.
View 1 RepliesSince yesterday my computer behaves really strange. I fear it's a hardware issue. At most I did some minor updates, but no big software or OS change.
When I turn it on it goes immediately to [url]
I guess it reads
Code:
Chasis intruded
Fatal Error... System Halted.
So this happens before the boot manager... When I press the reboot button it goes to the boot manager and works seemingly fine - all I noticed that it doesn't remember the time, or better remembered the time form the last usage but doesn't count it forward. While using the time seems to pass in a normal speed.
What could this be? Some chip on the mainboard broken? Some BIOS virus (does something like that exist?) Or maybe just a cable which got lose?
I don't know which other informations could be helpful. I built it myself some years ago and the parts are pretty random (back then I didn't even know about linux compatibility nor used it at all). I have a dual boot with openSUSE 11.2 and windows xp, but the network card is deactived in xp for a year at least already.
I'm trying to work with Xen for the first time,if I mess up some of the lingo here or if I don't quite make sense. I've been running openSUSE 11.2 since it first was released, and after an initial problem with my video driver, its been working great. I tried to install Xen today, and after the install appeared to complete successfully, it asked me to reboot and boot into the Xen kernel. When I did this, although the system booted up to the command line, it didn't launch KDE. When I try to start KDE manually it tells me that it "Can't connect to X server".
This seems to be roughly the same problem I had when I first installed openSUSE but I can't for the life of me remember how in god's name I fixed it.
I am having an issue with installing OpenSuse 11.2 using an Nvidia 9500GT. I have an AMD X2 64 4200+ processor, 4 gigs of RAM and 250 Gig HD.I was previously using an ATI X1300 but with the issues with 3D and the driver I decided to update my video card. To be clear, OpenSuse installed fine with the ATI X1300 card.
I purchased the 9500GT and installed the card. I then started the 11.2 32bit/i586 install and all goes fine until the install completes. Once you get the warning that the computer is about to restart (after the install completes) the system goes back to the Suse loading screen and then changes to the CLI where I can see what is loading. The last thing I see is that the HAL daemon is starting and then the screen goes black and the system completely locks up.
I have tried this several times using both the 32bit and 64bit KDE versions with the same result. I have tried Mandriva 2010 to see what results I get and it works fine.
Since I've installed opensuse 11.4 instead of 11.3, I cannot install .rpm packages nor execute updates. I get the following message: "There has been a (probably temporarily) when connecting to the software source/repository" (own translation) details: Media source [URL] does not contain the desired medium So, probably there is something wrong with my software sources. Could anyone give a suggestion to repair this since I'm not a linux expert and would like to install new software on my newly updated machine.
View 9 Replies View Relatedi'm trying to install my updates through install/remove software in gnome opensuse, but when I click apply everything just disappears, can I install them some other way?
View 5 Replies View RelatedI am attempting a Network installation of openSuse 11.3 on an old desktop which has IBM Boot Manager so that I can boot to one of three OSs, openSuse being the third. Sadly the installation of openSuse fails before the CD initial boot has finished. Looking at the text log of the starting process the problem appears to be a driver and the last line of text where it stalls refers to eata driver.
There are 4 hard drives in the machine, configured as two RAID 1 arrays driven by a DPT 2144W hardware raid card. (Very old but very good). If I Google eata I get a good deal on SCSI raid and DPT cards but I am out of my depth when they say a kernel module is needed.
Another concern is that the RAID arrays are configured using a bootable DOS configuration disk and once this is done they are recognized by other OSs such as eCS and OS/2. The arrays are just treated as single drives so these OS installations do not interfere with the card configuration. I am concerned because I cannot afford to lose the data on the drives but it appears the linux driver might want to rebuild the arrays.
Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies View RelatedI'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?
View 2 Replies View RelatedI'd like to change the font characteristics (size, colour) on initial login screen (list of users) however I cannot find the configuration options.
View 6 Replies View RelatedI just install Fedora 15 directly to an internal drive. I've installed a few programs using Autoplus, but when I try to run a software update, I get the following error when I try to install the updates:
'could not add package update for fedora-release-rawhide-15-3(noarch)updates: fedora-release-rawhide-15-3.noarch'
I have a user running a retail copy of RH 5 Ent. and isn't sure what package he needs. He is a developer and when installing other instances of RH he just checked off basically all of the packages under development during the initial installer. Now, he's trying to add packages but they require dependencies and he is not able to auto-satisfy those dependencies.
Is there a way that I can get back to that menu during the initial installation and let him check off all the boxes that he wants, or can I have RH auto-install all packages from DVD or install all required packages from DVD?
I have 2 machines running 11.4 but neither one can update it gets to the refreshing software list and stalls at 90%. I have let it sit there for a few hours and no change.
>zypper lr
# | Alias | Name | Enabled | Refresh
[code]....
fglrx error - Can't install new updates
View 2 Replies View RelatedWhen I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...
Automatic updates fail because:
PackageKit Error cannot-remove-system-package: Subprocess failed. Error: RPM failed: error: package libpackagekit-glib12-0.5.1-3.7.i586 is not installed
Manually updating from yaST gives the same error. However, I cannot find the above packge available for installation. i found the following link in the "Yast2-ncurses broken?" thread, but it doesnt automatically install, and I am unsure whether it will work with ver 11.2:
Index of /pub/gnu/ncurses
The updates used to happen automatically in 11.4 but the last few weeks no updates at all even if I do it manually in yast still no updates is this normal?
View 9 Replies View RelatedI keep getting the updates icon popping up asking me to install software that is either already installed (Adobe Flash Player 10.1) or something that fails when I actually try to install is but I am sure it is also already installed (RPM Fusion Repository Config -free and nonfree). When I try to install the RPM Fusion packages it asked me for a Software Signature and then fails with the following message: failed to install signature: Traceback
[code]...
I have the flash player installed already and I am sure I already installed RPM Fusion. how can I resolve this and stop it from constantly asking me to install these packages?
I've recently ran the Updater Applet to install any pertinent official openSUSE updates, but I got 2-3 (they vanished before I could click on them) popups on the bottom right of my screen saying that an update had failed. Additionally, I found the following message in the Updater's lower panel:
Code:
This update fixes an issue caused by a previous
yast2-ncurses update, which would leave some ncurses
(textmode) yast2 tools crashing.
- #569000: yast2-ncurses-2.18.11-0.1.1: crash of yast -i
with a segmentation fault
when using opensuse 11.2 i get a popbox saying there are security updates ready to install. if i right-click on each update, there is a "ignore this update" button but i cannot click on it because it is greyed out.
why can't i click on 'ignore this update'?
i thought this would be soo ovbiously easy i could work it out for myself...
now 11.3 is out, how do i upgrade from 11.2 (i presume theres an upgrade path via repo's than dvd/cd install)? i've tried 'Software Update', but comes out with no found updates.
After installing a pair of updates and restarting my Login window is gone. CTRL + ALT + F1 brings up the terminal and I can login there, but CTRL + ALT + F7 only shows the default green background with the cursor. No login window.
STARTX is running / XMD, GDM, KDM do nothing
I try to update my computer through the updater and it does not work, it fails, so it brings me to YaST, and that fails to... what is going on? Why are my updates failing?
View 4 Replies View RelatedI have an OS 11.4 system running on a network which prevents me from using the publicly available update repositories. Is there a way to mirror the update repositories onto a flash drive and updating from there?
Is this as simple as using wget to mirror certain directories on the public repository?
while downloading the updates, jersey central power had a power failure thus screwing up my router temporarily and completely screwing up the downloads; now back up and running, the update systems is not saying I need the updates but obviously I do;how do I go back to the point to get the updates?
View 4 Replies View RelatedThe repository [URL] is not currently (or no longer) valid. The path still exists up to the "Contrib" level, however, there are no files or subdirectories under it. There are also two siblings at the "Contrib" directory level ("Live" and "Update:") and there are no files under them either other than a single subdirectory called "Test" under "Update:". Does anyone know if the updates that used to be available in this repository have moved and, if so, where to? If the repository is no longer required and there is no replacement, I'll simply remove it. I have also noticed issues for several months where the updater applet will go into an "updating" state and never return from it.
View 2 Replies View RelatedI'm a long time Linux user but new to Suse. I got a couple of questions I was hoping someone might shed some light to. I'm running OpenSuse 11.3. -After running 'zypper update' I see it's listing a couple of new packages it wants to install (flash-player among them). I thought update would mean update existing packages, not install random new packages. Is there a way to restrict zypper to install only updates and no new packages?
-I'm trying to find a repository that has the complete courier mail server (smtp, webmail and all the rest, not just the imap server) but I'm having no luck. Anyone know where I could get it? I know I can build it myself. -Is there a way to automatically download all available updates so that they can later be installed interactively?
I installed openSUSE on my macbook pro 7,1. As of now I am trying to update the software, unfortunately, I have encountered a problem. As I hit the "Install Updates" icon, I get a window that gives me a readout of the current updates. No problem there. However, after I click the "Update" button, a second window pops up that gives a very long list of other software that needs to be either removed, installed, or updated for the original updates to be installed. Only problem is the list is so long, it extends beyond the visible desktop. This is a problem because I cannot click on the button to install those updates. The window cannot be re-sized, so there is no way I can reach the button, and I have even tried rotating the desktop 90 degrees (to make it longer), but still to no avail, as the install button is out of reach even then. I don't know how I can update the software if I can't hit the right button. Is there perhaps another way to get around this (like with terminal)?
View 1 Replies View RelatedToday, shortly after booting my OpenSUSE 11.3 I got this popup. [URL]. I guess it was caused by the Updater Applet when checking the repos for new updates. But what does it mean? Why do I get this now and not when adding the repo. It seems to belong to the filesystems repo and I have indeed added that some time ago (in order to install davfs2). I'm not sure what it means to accept a signature.
Normally with public key infrastructure, you need to accept other's public keys or certificates containing their public keys. And before doing so you need to verify the fingerprint, otherwise the whole procedure is useless, because it might be a fake certificate / man in the middle talking to you. Once you have accepted (trusted) the public key (or a certificate containing it), the system will check signatures for you.
So the question "do you want accept this signature" sounds weird to me. In openSUSE repos I have come across fingerprints many times before. But whenever I have searched google in order to verify the fingerprint I have not received any useful hit. I would have expected that valid keys and their fingerprints are listed on some web site. It appears there are three instances of package signing keys ... but there has not been any answer.
I have openSUSE 11.4 and added repro for Thumbleweed to the basic repro's.As told me I had to do a zypper dup ones for the Thumbleweed-repro to bring system up to date.
1) In KDE I do not see an update-icon in the system-tray anymore: 11.3 had one.Does this mean the auto-update function is disabled?
2) About "levels' of repro's: they are all 99, should Thumbleweed in my case be more important: say 75 ( at least <99 ) ?
3) When I use zypper up I have apps that wants updates and some are "hold back" Is this related to repro's that do refresh but not install ?
4) Someone told me NEVER mesh around with zypper DUP, so he means ONLY use zypper UP.