Ubuntu Multimedia :: Sound Distorts In Ubuntu 10.04 With External Audio Interface ?
Nov 1, 2010
I have an external audio interface that is supported by alsa and works really well with ubuntu 10.04. The only problem is that on my studio monitors I can clearly hear that the sound from ubuntu is distorted, like there is too much gain somwhere. Since my audio interface (Lexicon Omega) has an output level knob on the interface, ALSA does not have a level slider (software) through any mixer (eg GNOME ALSA mixer).
In order to stop the distorting sound problem, ie the signal input to my external audio interface is too "hot" first install PulseAudio Volume Control (referred to as pavucontrol in repos) in PulseAudio Volume Control configuration tab, set "profile" of your external sound interface to "off" log out, and when you log in again your problem should be solved.
View 2 Replies
ADVERTISEMENT
Feb 18, 2011
I own a Tascam US 122l USB audio interface. I just figured out how to run this thing with jack. Unfortunately the (output) sound is very very choppy and I am not able to use the volume control at all. how i could fix that? Or is there maybe a way to use my interface without jack and directly through alsa?
View 6 Replies
View Related
Nov 1, 2010
I recently got a new audio interface, which is working perfectly on ubuntu 10.04 i just plugged it in and it worked without any tinkering! the interface is a lexicon omega which is fully supported under alsa. The problem is that for some reason it's not working on ubuntu 9.04 (which is where were most of my work currently is so occasionally i still have to use 9.04 as i don't have all of the same software installed on 10.04).
Jack seems to detect it properly in both 9.04 and 10.04 as it is listed in "interfaces". But it does not show up in "Volume Control Alsa Mixer" so I cannot select it from the drop down list.
So currently I have no sound (just in case you weren't able to decipher that from my primitive ubuntu-speak above )
Here's the output of cat /proc/asound/cards
Code:
View 2 Replies
View Related
Jul 18, 2010
I'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
View 3 Replies
View Related
May 11, 2010
My laptop is a Dell Inspiron 510m with onboard Intel 855 sound (STAC 9750 AC97). The sound was perfect with WinXP, but with Ubuntu it's tinny and lacks richness and vibrates and distorts at higher volumes. I've played around with Alsamixer and changed the driver from ALSA to OSS4 and it has improved slightly, but still not perfect. Is it just not gonna get any better, should I not be expecting it to be as good as WinXP?
I've seen on the Intel site a Linux driver for my controller, it's a tarball but it won't compile after extracting it (read on this forum that someone had the exact same problem with that driver). Will the Intel driver not help, does the problem go deeper than just the driver? It would be perfect it you could just wrap the Dell/Intel driver and use that (just like with wireless ndiswrapper).
View 1 Replies
View Related
May 22, 2011
I'm using kubuntu 11.04 sometimes when I watch ..... or other videos, the screen distorts (kinda like a detuned tv) and the machine freezes. the only way to get out is to do a hard reset. I *think* its my video drivers.How can I get the most up to date drivers?below is my video card details:Quote:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)or maybe its my Flash plug-in (i'm using the adobe plug in and FF)
View 1 Replies
View Related
Dec 12, 2010
I had originally planned on buying a USB 2.0 audio interface to use with my first home recording studio, but it sounds like Linux support is pretty horrible for these devices. On the other hand, the FFADO project seems to be very promising, so now I'm looking at getting a firewire interface. The only problem is that all I have on my laptop (sony vaio VGN-N365E) is a little 4-pin firewire port. If I'm not mistaken, those don't provide any power. Will this work with any interfaces (maybe one that has it's own external power adapter)? Or is there an adapter I can get to convert it to a full firewire port and add power?
View 2 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
May 24, 2010
I've purchased Creative sound blaster. It's external usb sound card, which worked well as I plugged it in. In sound preferences it was setted to 'Analog stereo output' in hardware, and I've accidently messed up with Connector droplist in Output bookmark. As a result - silence in my speakers. I wonder what went wrong and where to search for it. The card is worked and it is supported by ALSA. Just some settings went wrong.
View 1 Replies
View Related
Jan 5, 2011
i should start by saying i'm using ArtistX OS, (based on Ubuntu Karmic (9.10)) I have a cassette deck and a usb turntable that i want to use to digitize my old stuf. at first, there was no output from either device, but after much fiddelin', when i right click on the volume icon and hit sound preferences, input tab, i can see that there is now incoming signal from both devices, but no audio rendering. also, again after much try this or that, got audacity to record and playback (audibly, but i could still not hear it durring recording), but that which was rendered was not acceptable quality for archiving i havn't a clue what to try now
View 1 Replies
View Related
Dec 20, 2010
I have a pc where I run ubuntu 10.10 and on this pc i have installed vlc and on boot i start the vlc http interface. Therefor I created the file /etc/init.d/vlc. The file seems like this:
[URL]
and I also updated rc.d. Vlc starts on boot as desired I also can send commands like in_play the file (a playlist) is loaded and reguarding the status.xml the file is played. But when no user is logged in I hear no sound. When I perform a login on the machine there is first still no sound but when I send e.g. the pl_next command or call in_play again then there is sound. Sadly the pc shouldn't be attached to a monitor and therefor I can't perform a login everytime so I need sound, when noone is logged in. Why is there no sound?
View 1 Replies
View Related
Aug 11, 2011
I have an ASUS M5A78L-M LX motherboard with ALC887 inbuilt sound. The sound is barely audible unless the speaker volume is all the way up, and then it is very crackly. The BIOS is set up to use AC97 sound instead of HD Audio, which doesn't work either.
I have tried uninstalling and reinstalling ALSA drivers but it didn't really change anything.
Aplay -l comes up with this:
But still very little sound.
View 1 Replies
View Related
May 29, 2010
There is no audio output to the speakers when listening to, or while recording from Line-in. Enabling software sound playthrough in Audacity did not help. Audacity simply froze. But I can make fine recordings from Line-in and play the recorded files. Also no sound from cd-audio. KsCD begins playback, but no sound. Only VLC works with cd-audio. Maybe some slider settings that I missed? This is what I did so far: Advanced Linux Sound Architecture Driver Version 1.0.20
00-00: CMI9880 : CMI9880 : playback 1 : capture 2
00-01: CMI9880 Digital : CMI9880 Digital : playback 1 : capture 1│
louis@linux-6ozx:~> cat /proc/asound/modules
[code]....
View 3 Replies
View Related
Apr 30, 2010
I recently upgraded to Ubuntu 10.04 and my sound is not working. I have a gateway p-6860FX. i've had this trouble since 9.04 and also in 9.10, but I worked around it by adding the following to my alsa-base.conf with
Code:
Sound worked fine after that, but it doesn't work with 10.04
Here are the results of aplay -L
Code:
I went in to alsamixer and turned everything up. it didn't work.
View 5 Replies
View Related
Jul 8, 2010
Something is wrong with the audio on my laptop, when I used the live CD previously, nothing was wrong. It's all staticy when the base comes on or like a beat (I don't know how to explain it). Even ..... vids and such. My laptop audio is not usually like this.
View 5 Replies
View Related
Feb 7, 2011
I'm having some troubles with my soundcards. I have a Audigy ES PCI soundcard and I just recently bought an M-Audio Audiophile 24/96 soundcard and at the moment I have both of them installed. I'm dual booting w/ Windows xp and I need the Audigy in Windows for gaming and because of the mic input that the M-Audio doesn't have.
First when I installed the M-Audio only Amarok (and probably other 'Phonon' apps) worked but I had no sound in mplayer, xine etc. With some googling I found a way to make the M-Audio card the primary card for Alsa and now mplayer & xine work fine too. M-audio 24/96 uses the module ice1712.Today I noticed I don't have sound in flash player (I use opera, but tried firefox too), and the (alsa?) command aplay won't play any .wavs. Flash sounds used to work okay with only the Audigy installed. I have tried to reinstall the flash player.Aplay -l :
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: M2496 [M Audio Audiophile 24/96], device 0: ICE1712 multi [ICE1712 multi]
[code]....
View 1 Replies
View Related
Apr 12, 2011
Well I installed Ubuntu 10.10 64Bit along side Windows 7, and I've been unable to get any sounds working, apart from the log on sound. So I tried installing some drivers, and now there is no sound at all, and no sound devices show up in System-Preferences-Sound-hardware
I'm using the on board HD Audio (ALC 889A) and using the optical Audio out for 5.1 Surround sound.
I've tried just using the Stereo ( Green Jack ) out, and still nothing. The suggestions on the on the Ubuntu site, and the following post didn't seem to work either.
[url]
I Can't find a great deal of posts with the Realtek HD audio.
View 1 Replies
View Related
Jul 12, 2011
I have installed the Ubuntu 10.04 LTS on a Acer Aspire 4520 laptop and I can't get sound. I try to update alsamixer without any positive results. How can i get sounds on my laptop?
View 4 Replies
View Related
Aug 31, 2010
I don't have any sound in my external device (TV). I'm attempting to watch a movie on the VLC player but I can't seem to get the sound to work through my television speakers! They are coming out of my computer speakers just fine though.
View 5 Replies
View Related
Jan 20, 2010
I have an Creative Labs CA0106 Soundblaster and all I hear is static I cant seem to find anyway to get it to work. I'm new to ubuntu.
View 1 Replies
View Related
Jan 24, 2010
I'm running Ubuntu 9.10, but so far I've been unable to get sound to work. I know my sound card is Realtek, because I've had to install the HD Audio Codec Driver when I was on Windows. I downloaded the driver for Linux and it is currently sitting in my home folder. When I tried to Code:sudo ./installthe driver, it failed for the following reason:
Code:
WARNING!!! The mixer channels for the ALSA driver are muted by default!!!
**************************************************************************
[code]....
View 7 Replies
View Related
Feb 4, 2010
I seem to be having some audio clashes. I use Exaile to play music (if that matters), and after I play music, no sound comes out of videos (not just Ubuntu, it won't work from Yahoo or MSN videos either). Then when I try to go back to playing my music on Exaile, no sound will come out of that. Likewise, if I restart the computer... the sound works again. If I instead watch a video first, there will be sound -- but as soon as I try to play music from Exaile, nothing comes out.
View 6 Replies
View Related
Mar 19, 2010
I was running Ubuntu 9.04 and just upgraded to 9.10 recently. I see many others are having problems with their sound. I too do not have sound. I did get sound running briefly with an Alsa update, but it was muffled. In trying many other fixes, I again have no sound and can not resolve it. I am thinking of burning a new cd and doing a fresh install and starting over.
My lap top is an MSI GT725 US model with an HD4850 mobility graphics card. I dual boot between Vista 32 bit and Ubuntu.
Has anyone else had any luck getting the Realtek ATI sound working in 9.10?
View 6 Replies
View Related
May 2, 2010
I'm pretty much an Ubuntu noob and I'm about to give up. I've spent hours reading tips and tricks to get this sound card working but I usually end up making things worse. This will be my last attempt
- onboard sound is disabled in BIOS
- Delta 1010LT is recognized
- fresh Ubuntu 10.04 32bit install . . . everything is default.
- I know how to access the terminal and for argument's sake, let's say that's it. I need step by step.
I tried to remove all instances of pulse audio in the past and it removed the desktop as well. Talk about frustrating. Ok, so here I am. Fresh install, no sound and I haven't touched a thing.
View 9 Replies
View Related
Jun 8, 2010
I have recorded some video, and now wanted to add some sound.I added a sound track, but when it's playing, I can't hear anything.I'm usually running Jack - for Ardour/Hydrogen etc... - I can't find anywhere in OpenShot to change the Audio to Jack, so assume it's not supported.I have killed Jack in the hope that Alsa will work with OpenShot, but still I have no sound.
View 3 Replies
View Related
Jun 12, 2010
Cannot hear any sound from the system
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 0/1
Subdevice #0: subdevice #0
View 3 Replies
View Related
Aug 19, 2010
I have the usual problem of "My sound is not working". I have a few images and my output from:
Code:
lspci
Code:
lspci -v
and
Code:
aplay -l
I can't really do anything with the speaker as it is hidden in the case.
View 9 Replies
View Related
Oct 12, 2010
i just installed a new Ubuntu 10.10, but i have no sound at all. I google-d for my problem, but i cant find any fix. In sound preferences - everything look great and working - there is my X-fi Xtreme audio CA0110-IBG, and i can choose how many channels to use, but when i go to test button, there are no sound from any channel. I got 5.1 sound system, and i use Flexijack for mic. Im confused, because everything looks like working - the system recognises my sound card, but there no sound at all. I tried to kill pulseaudio, but it not help me.
View 8 Replies
View Related
Nov 6, 2010
Recently I installed Ubuntu 10.10 64bit and I have a problem with it.
I have a motherboard with internal audio card as well as I have ATI 2600 card. When I just installed Ubuntu 10.10 sound via motherboard worked perfectly.
But some time later it disappeared. Actually "Output device" that represents audio card disappeared. See screenshot of the Audio Settings dialog.
I made 2 thing - most likely that one of them cause this problem:
- I tried to setup Panasonic Plasma TV as a second monitor via HDMI output of my video card (ATI 2600).
- I added maven-backports repository (new kernel or new audio driver?)
Have anybody seen this problem? Are any pointers how to fix it? If you need any additional info - let me know I'll be glad to provide it.
View 4 Replies
View Related
Nov 11, 2010
I can't seem to get my computer to record the audio from an application... Sound Recorder, Audacity, and outRec all output files but they are just silence, even though when I see them in a media player they show the visualizations. I have followed a couple guides to no avail.
View 4 Replies
View Related
