There is a very small thing which needs to be fixed in 11.04. In AisleRiot Solitaire the cards are ugly. In View -> Card styles -> Install card themes it asks me if I want to install additional software packages, but the Install button is greyed out.
This is almost trivial, but is there a way to get nicer cards?
I'm completely new to DocBook, but am writing a few things I'd like to use it for. I'm looking to get away from the standard stylesheet (I'm using Ubuntu, and at the moment I use /usr/share/docbook-utils/docbook-utils.dsl). Is there anywhere I can browse different ones on the web to find one I like, that formats to HTML and PS/PDF?Am I even going about this in the right way? As much as I try and learn, I just can't fit it into my head how everything fits together with DocBook.
View 2 Replies View RelatedI just installed a fresh copy of Ubuntu on my small 64GB SSD alongside my main drive for storage. I got everything set up just how I like it (customized clearlooks with Ubuntu Mono Light icons) the same as I have it on my laptop. I disabled all system sound effects.This morning, I wake up to it having a different icon set, and the menus having an identical grey scheme. In addition, the Ubuntu system sound effects are playing, even though in the settings it says they are disabled.I'm not really sure what's wrong! It's the same in both compiz and metacity.Here's a screenshot. Note how the boring old-style theme is applied in the update window and the menu at the top, yet the customizing themes window has the correct appearance for the buttons (funny coincidence)EDIT: I think I've narrowed it down to gnome-settings-daemon. When I try to initialize it via the terminal I get this:
** (gnome-settings-daemon:3852): WARNING **: Failed to acquire org.gnome.SettingsDaemon
** (gnome-settings-daemon:3852): WARNING **: Could not acquire name
Is there any way to set KDE styles per application? Something in the lines of:
KDE_STYLE="foo" kdenlive
I want to set the default colours for the vttys but can't seem to find where the defaults are kept, I can set up the vtty as I like via setterm in .bashrc etc but as soon as I do an ls or vim on return the colours are reset to white on black, been googling this but can't find an answer, any ideas?
View 2 Replies View RelatedI am trying to install the somewhat quite popular theme QTCurve, so I can use it as a base theme for the theme black pearl, which I am really into. However, being usually highly skilled in computer knowledge, I can find the proper way/area to place a new theme, I just know it might be under a folder in the root sector containing themes for kde and will be there upon restart.
View 3 Replies View RelatedI'm confused while trying to fix controls styles (tabs, buttons, scrollbars, main menus, popup menus) of my 3dparty applications in KDE. The problem reflected in the fact that all controls of non-KDE applications (Firefox, Zend Studio, Gimp,..) have Gnome styles. But setted widget style is "Oxygen".I assume that this problem has appeared after installing new fonts in my system.
View 10 Replies View RelatedI downloaded a few themes from kde-look.org, but now I have no idea how to load them under styles. How can one load a downloaded theme under styles?
View 14 Replies View RelatedI recently installed Ubuntu 11.04 and trying to learn the new Unity environment. Bibus is a reference manager which I used with great pleasure for sometime. It was perfect in terms of inserting and formating references to openoffice-writer.Now, with 11.04 Unity environment Bibus can insert references to Libreoffice-writer but can not change reference styles. Once I log out and re-enter with ubuntu-classic environment I see that Bibus is working perfectly in Gnome desktop of 11.04.In the Unity desktop I have to run Bibus as root to change styles and change reference formats.Why Bibus can not change styles and format references in Unity environment unless having root privileges?
View 2 Replies View RelatedI have just upgraded my system (debian testing, a lot of the upgrade had to do with latex packages).Now some latex styles have disappeared.For instance, I used to have garamond fonts installed but now they have disappeared.I have re-installed the package tex-live-fonts-extra (which contains garamond, but the command
usepackage{garamond}in my latex file always leads to the error message
ERROR: LaTeX Error: File `garamond.sty' not found.
I have installed restricted drivers and upgraded system software (I believe all during one session without a start), after restarting my computer the panel style changed to another (ugly) style. I have ensured that I restarted multiple times afterwards and that the system -> pref -> appearance setting is set to "Ambiance."
I have also tried:
Code:
gconftool-2 --shutdown
rm -rf ~/.gconf/apps/panel
pkill gnome-panel
and
code....
I have a Dell M6500 w/ an Nvidia graphics card.
It could be noted that I have previously installed Ubuntu on this machine (for testing on another drive) and have upgraded (although possibly in piecemeal) without this problem happening. Any assistance would be appreciated, otherwise I'll likely reinstall as the time to do so has so far been less then trying to fix this problem.
Edit: Did some experimenting, reinstall system and installed the recommended NVidia restricted driver (from the system -> administration menu), I had a choice of "Version 173" and "Recommended," as soon as I did and restarted the retro styling returned, am going to try using the (presumedly) newer driver in a bit.
I'm trying to change the styles in non-KDE apps like Synaptic. Trying to do away with the think borders within the app box. I downloaded a bunch of GTK files and the GTK icon shows in the System Settings, but can't get the styles to change even after restarting KDE.
View 4 Replies View RelatedHow can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies View RelatedMy video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View RelatedI recently installed a startech PCI usb expansion card...All went well and all external devices connected show up without a hitch. However a day ago The card/devices just STOPPED. I rebooted and no avail. Rebooted a second time got a IRQ 19 failure error. Then on a third try It showed up and worked fine... This has happened twice. Here's my IRQ print after running cat /proc/interrupts
CPU0 CPU1
0: 132 3 IO-APIC-edge timer
1: 0 146 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
I am assuming that the second to the last entry is the pci usb card. Is there a way to home in more deriectly to find and troubleshot the problem and see if its module or IRQ?
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies View RelatedI am wondering if it would be possible to format an 8g SDHC card in a way that it will be able to be written to and read by an SD reader?
Reading about SDHC vs SD suggests that the only difference is the block/cluster/byte configurations. Is that true?
Could I format the 8g FAT32 SDHC with gparted to a 1g FAT16 partition with the rest of the space left un-formatted so an SD reader could handle it?
Recently I had to replace my Hauppauge HVR-1600 (it was doing everything I wanted it to do but after a few years burned out) and decided to get the HVR-2250. Before purchasing I checked the forums and noticed that there was quite a bit of support and most everyone managed to get it working so I thought it would be a good idea.
The problem I have now is that, though lspci shows the card as Multimedia controller: Philips Semiconductors Device 7164 (rev 81); however, when trying to setup mythtv-backend, the card does not show up under the "capture card" section. After a few hours of research, I came across this thread and it seemed to be general consensus that the method worked so I tried it. Still no luck.I ended up formatting, fresh install of Ubuntu 10.10 and then installed MythTV and still nothing. Not really sure where to go from here.
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I recently installed Xubuntu on my old P3 laptop (Compaq Armada E500 if anyone is familiar). The laptop is a bit old, so both wired and wireless networking is done via PCMCIA cards. I have 2 cards installed, one for each purpose. I can't find the dongle for the wired card right now, so I am trying to use the wireless card. I am able to find the network I want to connect to, and type in the password since the network is secured. It tries to connect but then pops up again asking for the password (I know it is correct). Is this card supported by linux/compatible? I tried finding drivers online but the sites that had drivers were down.
View 1 Replies View RelatedLooking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?
View 5 Replies View Relatedvery much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies View RelatedI have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
My soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....
I have just purchased a HTPC - cheap purchase pre-built from ebay - ideal size - small box - not too out of place in the lounge.The HTPC has one rj45 connection built on to the mobo, with a wireless card + aerial in the back (wireless broadband) and I am going to take the dtv card out and replace it with anothe rj45 card.I intend to run ubuntu server 10.10 on the server and I intend to connect my sky broadband through the server to give me the security of a server based firewall and the security of the server as a whole.
View 5 Replies View RelatedHow to get Device ID CF Card or all information about CF card?
Info: I use USB card reader to connected CF card