I have bought asus notebook with nvidia geforce GT 320m, and installed ubuntu 9.10 notebook remix, and i can't found any drivers for video card, iam new in linux.
View 9 RepliesI have just upgraded from a fully functional 9.10 to 10.04 which doesn't seem to find the correct intel video drivers when trying to activate compiz extra desktop effects on my laptop...
[Code].....
I tried reinstalling the video drivers using sudo apt-get install xserver-xorg-video-intel with no luck, telling me I already am using the latest version.
I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.
The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:
1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??
I updated my video card drivers, but when I boot back up, I have no GUI and am given a terminal because it does not recognize the drivers. I have already changed "quiet splash" to "nomodeset" .
Specs:ATI Mobility Radeon 5650
500GB (7200RPM) Hard Drive (SATA)
Intel Core i5-450M processor 2.40GHz with Turbo Boost Technology up to 2.66 GHz
4gb of ram
Ubuntu 10.10
I was messing around with Ubuntu trying to make somethings work. Then i rebooted ,and I wasn't able to turn on Visual Effects. So I'm guessing that I must have replaced my video card driver with a non-compatible one or just removed it without knowing. So I was wondering "How Can I Switch Back To The Video Card Driver Ubuntu Came With?" Without reinstalling Ubuntu? Since I was able to at least switch on Visual Effects with it.
And could you also take a look at: [URL]...
I just installed a nvidia TNT2 m64 video card on my AMD 2500+ Ubuntu Linux 10.04 on Gnome 2.30.2. (yeah, it's old). I'm trying to install the proper driver, but system>admin>Hardware drivers says there are no proprietary drivers enabled. nVidia synaptic packages installed (settings; common; modaliases 96, 173, current; xorg video). I used to have the same, or nearly the same card working great before some a**hole stole it. How to configure?
View 1 Replies View RelatedAfter having a lot of trouble with vista and no chance of getting Windows 7 anytime soon, I decided to get Ubuntu and use dual booting with vista. I had recently installed it about two days ago and for the most part it worked pretty well. That is until I installed the driver for my video card, an ATI Radeon HD2600 pro, then things went down hill for me. Every time I try and boot Ubuntu it now goes to a black screen after the logo comes up and i am unable to do anything. I have tried to look up some solutions, but I am still relatively new to programing and some of this stuff seems a bit complicated for me. Is there a simple solution to this that does not require a reinstall?
View 9 Replies View RelatedI've tried to enable the drivers for a Nvidia 8400GS video card on Ubuntu 10.04. I've tried change desktop background > visual effects. It tells me Desktop effects can't be enabled. Sudo jockey-gtk looks and tells me no proprietary drivers are in use by my system. I've tried installing from Nvidia's site and that seems to go okay but doesn't seem to work. I have an internal video card that can't be turned off in BIOS )either ON or AUTO) that might be causing me problems.Lspci:Quote:
ron@desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
[code]....
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
View 9 Replies View RelatedWhere should I get the drivers for the video card R7 260X to run on Debian Wheezy? Because it cant be from amd site, considering that I installed from their site, but when running apt-get check is said to me that there was the missing dependence fglrx-core..I also couldn't remove it, because it had other unmet dependencies... After long time attempting to solve on my own I just got enough pissed that I formatted the machine.Now I am asking here to find out what is the best practices when installing those drivers, because clearly I wasn't doing it right...
View 5 Replies View RelatedQuote:
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
So after I installed the ATI Radeon 3400 series video card in my machine, the Xserver cant start! after it loads, it takes me to the init 3. When I tried startx, the screens either go blank or doesnt let me.
I tried to install everything following this website: [url]
I wanted dual monitors but now I cant even get one. The xwindows doesnt appear.
Things I tried:
1. Deleted the xorg.conf and reconfigured (didnt work).
2. sax2 -r -m 0=versa (didnt work)
3. reconfigured the ATI radeon driver from init 3 (didnt work)
4. copy and paste the oold version of xorg.conf (didnt work)
5. tried to run set apt or dpkg-reconfigure command (commands not found)
6. tried xconfig and prompt the best I coudl (didnt work).
7. aticonfig commands (As shown in website) (also didnt work)
I have the live CD to run it from there but I dont know what to do once I get to the terminal.
Is there any way I can revert to previous configuration since the ATI driver gives me some problems? Like a restore function in windows?
How or what files I should change for the X-server to run properly (is there any other file than xorg.conf?....)
The monitors I have:
2009W Dell Monitor
1398 Dell Monitor (I wan to get the dual exntended monitor but it seems to gave me only the mirror image, thats why I tried to reconfigure the video card)
VideoCard:
ATI HD Radeon Mobile 3400 Series
Computer:
Dell Optiplex 680 (i believe) with SUSE 11.26 and x86_64 bit
Or if you can send me the xorg.conf file ...
How is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
View 1 Replies View RelatedI wanted to try 3d desktop so i installed 3d support for nvidia graphics using the instructions on this webpage [url]
I Dont have nvidia i have ati so needless to say i have to gui when i boot up
It shows the fedora loading bubble then a blinking cursor.
I can get to a virtual terminal.
So how do i undo what i did I just want to get it back to normal i dont need 3d support.
I installed Lubuntu 10.04 yesterday (yay, my first serious installation!), and I was trying to install the drivers for my video card (GeForce 6200), when it told me that it couldn't use ld. After oing some research I found out that it was in binutils. So I went over and got it and tried to ./configure it when it told me that there weren't any C compilers in $PATH, so I went over to the gcc homepage with a fine-toothed comb and found gcc 4.5.0. When I tried to./configure it, it also told me that there aren't any C compilers in $PATH.
View 4 Replies View Related0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.
I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.
I've loaded Fedora and must say what a nice OS! But I'm having some issues getting the video working correctly so let me jump right into the issue. The video is very garbled and hard to read. can't seem to find a way to correct what would appear to be a driver issue. Here are a list of things tried:
- display works fine with Ubuntu
- display is clear but is chopped off when using an external monitor from onboard vga slot
The video card is an ATI radeon and the linux drivers from the ATI site don't work with the new images that are out yet.
How do I check what video driver I have installed in the terminal? Then how do I install or yum install it? I wanna do everything through command line soz.. I have an ATI 4850 I believe.
View 2 Replies View RelatedThe installer has left me with 1,024 by 768 pixels and a driver that will not reach anything like the res my card and monitor will cope with. The display is currently blanking every 30secs or so for a very brief interval as well.
I may have missed something on the install but there didn't seem to be any opertunity to choose either a driver or monitor type. I was eating my dinner through most of it.
I had a brief flirtation with Mandriva and know that linux should be able to nearly fully support my monitor which is 1680x1050 by Belinea. Earlier open suse install gave the option of seting this sort of thing up and listed all of Berlinea's monitors as well.
The card is an nvidia 210 by Asus. Reported as a 200. I do not want to try installing an nvidia driver yet as I understand that there will be problems. Also I have a YAST ipv6 dns problem = no updates.
I have ubuntu 9.10 I have the ATI Technologies Inc Mobility Radeon HD 3600 Series [1002:9598]video card. I dont know what it is but i want to enable extra visual effects. unfortunally a message stating "searching for drivers" appears, eventuall folowed by " Visual Effects can not be enabled" i think this is due to the drivers obviosly.
what are the drivers I need for linux (if any) for my specific video card? what do I need to do? also which video card are best fit for ubuntu/ linux? note: I dont know what it is, but originally when I first installed ubuntu I did something and the visual effects had worked had worked and up until recently i may or may not have of messed with any thing could i have of touched something
i installed Fedora 12 on an external hard drive. Everything went fine with the installation and it was working perfectly until i tried to install my video card drivers. I have done this many times before and it has worked. I have an ATI card. Anyway after installing the driver i rebooted and now when it starts it show the loading bar on the bottom but then nothing happens its just a black screen!. The worst part is that when i go into windows and my external is plugged in windows wont read it and i have very valuable data on it. I go into disk management and it shows up but windows says that its empty. which is obviously not true because Fedora starts to boot. I really just want Fedora off my external and for windows to read my external with all the files still on it. Is there a way to get by that blank screen?
View 2 Replies View RelatedI can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
I just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
is this possible? Or does one have to use the binary blobs?
View 1 Replies View RelatedI have a new dell inspiron 1545 since i am facing problems with vista i wanted to work with linux operating system (fedora 9). I want to install the video drivers and sound drivers for my laptop..When i installed fedora 9 my screen resolution was 1366x768 but suddenly now my resolution is 1024x768. I tried to change the resolution but I am unable to find my laptop resolution. What could be the problem
Here I can see my video card and sound card.. I want to install the drivers for my cards
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies View RelatedI recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedGot a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies View RelatedMy video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.