Ubuntu Multimedia :: Can't Enable Nvidia 8400GS Video Card Drivers?
May 17, 2010
I've tried to enable the drivers for a Nvidia 8400GS video card on Ubuntu 10.04. I've tried change desktop background > visual effects. It tells me Desktop effects can't be enabled. Sudo jockey-gtk looks and tells me no proprietary drivers are in use by my system. I've tried installing from Nvidia's site and that seems to go okay but doesn't seem to work. I have an internal video card that can't be turned off in BIOS )either ON or AUTO) that might be causing me problems.Lspci:Quote:
ron@desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
[code]....
View 1 Replies
ADVERTISEMENT
Oct 8, 2010
I installed libvdpau and then I installed the nvidia vdpau software. I was following some steps from another post. When I run XBMC and hit 'O' I can see that the gcpu is still not doing any work (0 - 6%), the two computer cpus are doing all the work. They run at 30%'ish on 720p content and that renders smooth. No prob there. However, the cpus jump up to 50%+ (both cpus) on 1080p content and they can't keep the frame rate steady. It jumps around significantly so of course the movie stutters. No, the network is not the issue. Its completely wired gigabit end to end. Plus I'm running the video from the local hard drive and it doesn't change.
So... the solution is to get VDPAU working and so far I haven't found the right instructions.
View 4 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Feb 1, 2010
I'm running Karmic on AMD64x2, and I have Compiz. I have been running fine, but when I run top, I see that compiz.real always takes up 100% of one of the cores of my CPU. this happens even when I change the visual effects to none in the appearance preferences. This problem starts as soon as I log in. My graphics card is an nvidia 8400gs, which is not that good, and I've installed my drivers using envy. Does anyone have any ideas about this problem?
View 4 Replies
View Related
Feb 3, 2010
I have ubuntu 9.10 I have the ATI Technologies Inc Mobility Radeon HD 3600 Series [1002:9598]video card. I dont know what it is but i want to enable extra visual effects. unfortunally a message stating "searching for drivers" appears, eventuall folowed by " Visual Effects can not be enabled" i think this is due to the drivers obviosly.
what are the drivers I need for linux (if any) for my specific video card? what do I need to do? also which video card are best fit for ubuntu/ linux? note: I dont know what it is, but originally when I first installed ubuntu I did something and the visual effects had worked had worked and up until recently i may or may not have of messed with any thing could i have of touched something
View 1 Replies
View Related
May 31, 2011
I have a NVidia 8400GS card for which I installed the requisite drivers by doing an update:
Code:
sudo apt-add-repository ppa:ubuntu-x-swat/x-updates
sudo apt-get update
sudo apt-get install nvidia-current
[Code]....
View 5 Replies
View Related
Dec 21, 2010
I just installed a nvidia TNT2 m64 video card on my AMD 2500+ Ubuntu Linux 10.04 on Gnome 2.30.2. (yeah, it's old). I'm trying to install the proper driver, but system>admin>Hardware drivers says there are no proprietary drivers enabled. nVidia synaptic packages installed (settings; common; modaliases 96, 173, current; xorg video). I used to have the same, or nearly the same card working great before some a**hole stole it. How to configure?
View 1 Replies
View Related
Apr 11, 2011
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
View 9 Replies
View Related
Jan 5, 2009
Quote:
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
View 3 Replies
View Related
Nov 6, 2010
How is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
View 1 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Nov 22, 2010
Got a Gforce4 Ti 4400 graphics card. After installing 10.10 everything works but not optimal:
I cannot choose any visual effects under appearances. I don't have a NVIDIA menu. Can't use any of the features. When looking in the 'additional drivers' section, nothing shows up. Looking at some threads, I tried what is described in: p {margin-bottom: 0.08in;} [URL]
However, the result is crap. As described further down that thread, my screen goes to crap. So, re-installed everything again and I am now wondering if I should just give up. Not my nature though so here is my question:
My card is supported with the Legacy NVIDIA driver: 96.43.xx driver
Latest version on their website:
Version: 96.43.19 Certified
Release Date: 2010.11.16
Operating System: Linux
Language: English (U.S.)
File Size: 15.7 MB
This file is a .bin file. So what should I do. I read something like if you don't use something from the repository you have to re-install it every time Ubuntu's kernel is updated. However, does the driver in the repository support my legacy card. Is it wise to install the certified driver and how do I do that?
View 6 Replies
View Related
Jun 19, 2011
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies
View Related
Apr 6, 2010
I recently installed ubuntu 9.10 dual boot. All went well until I upgraded the video drivers for the nvidia chipset on my motherboard. If I leave Gnome to start with the single user i created i get a black screen and 'mode not supported ' message on the monitor. BUT if i drop to root and 'startx' all is well and i can adjust the various screen resolutions and they all work well.
At this point i created another user name to check, and that works fine also, but if i drop back to the original user i get no screen unless i select 800x600, although all the other resolutions work fine with root and the other user name. Im stumped as I presume there's only one xorg.conf file for all users.
View 1 Replies
View Related
Jan 5, 2010
I have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is:
Section"Driver"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
Section"Monitor"
Identifier "Configured Monitor"
EndSection
[Code]...
I tried changing the driver from "vesa" to "nv" without any effect. Does anyone have any idea what I should do to get this to work?
View 9 Replies
View Related
Sep 1, 2011
A few days ago, I upgraded my system from the EOL 9.04 to 10.04LTS. This did go relatively well, though the upgrade process reported some "could not update" errors for the NVIDIA drivers and at the first boot it reported it had to start in low graphics mode. I noticed that I had manually installed drivers from NVIDIA's website before the upgrade, while afterwards the hardware drivers from the package manager had been enabled. I then disabled Ubuntu's drivers, and attempted to manually reinstall NVIDIA's own drivers.
This resulted in some errors related to the install script not being able to find some vdpau related stuff. Something interesting then occured. As root everything worked flawless, but as normal user I still ended up with errors resulting Ubuntu to continue in low graphics mode. So I enabled the package managers driver again. This seemed to solve all issues for the next 5 boots. Until this morning, I again get a black screen with only a blinking "_" on the screen for quite some time, after which (nice feature) Ubuntu proposes to continue in low graphics mode.
Here is a relevant part from my syslog:
Aug 10 08:17:53 linux kernel: [24.075265] [TTM] Zone kernel: Available graphics memory: 1028724 kiB.
Aug 10 08:17:53 linux kernel: [24.075275] [drm] nouveau 0000:04:00.0: 256 MiB VRAM
Aug 10 08:17:53 linux kernel: [24.097167] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
Aug 10 08:17:53 linux kernel: [24.098283] [drm] nouveau 0000:04:00.0: Allocating FIFO number 1
Aug 10 08:17:53 linux kernel: [24.102934] [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1
Aug 10 08:17:53 linux kernel: [24.103515] [drm] nouveau 0000:04:00.0: Detected a DAC output
Aug 10 08:17:53 linux kernel: [24.103518] [drm] nouveau 0000:04:00.0: Detected a TMDS output
Aug 10 08:17:53 linux kernel: [24.103521] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
Aug 10 08:17:53 linux kernel: [24.103522] [drm] nouveau 0000:04:00.0: Detected a DAC output
Aug 10 08:17:53 linux kernel: [24.103526] [drm] nouveau 0000:04:00.0: Detected a VGA connector
Aug 10 08:17:53 linux kernel: [24.103577] [drm] nouveau 0000:04:00.0: Detected a DVI-I connector
Aug 10 08:17:53 linux kernel: [24.858579] nvidia: module license 'NVIDIA' taints kernel.
Aug 10 08:17:53 linux kernel: [24.858583] Disabling lock debugging due to kernel taint
Aug 10 08:17:54 linux kernel: [25.401599] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
Aug 10 08:17:54 linux kernel: [25.632700] NVRM: The NVIDIA probe routine was not called for 1 device(s).
Aug 10 08:17:54 linux kernel: [25.632704] NVRM: This can occur when a driver such as nouveau, rivafb,
Aug 10 08:17:54 linux kernel: [25.632705] NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
Aug 10 08:17:54 linux kernel: [25.632706] NVRM: the NVIDIA device(s).
Aug 10 08:17:54 linux kernel: [25.632708] NVRM: Try unloading the conflicting kernel module (and/or
Aug 10 08:17:54 linux kernel: [25.632709] NVRM: reconfigure your kernel without the conflicting
Aug 10 08:17:54 linux kernel: [25.632710] NVRM: driver(s)), then try loading the NVIDIA kernel module
Aug 10 08:17:54 linux kernel: [25.632711] NVRM: again.
Aug 10 08:17:54 linux kernel: [25.632713] NVRM: No NVIDIA graphics adapter probed!
View 3 Replies
View Related
Feb 28, 2010
I'm trying to enable the Nvidia drivers so I can use the Desktop effects and play games but when I go to Systen -->Administration-->Hardware drivers It say that There are no proprietary drivers in use. install the Nvidia driver?
View 2 Replies
View Related
Jun 4, 2010
Well the Screenie explains most of it.I had trouble update my drivers but i finally did but now I cant use my compiz effects like I did Before I enabled the drivers.
View 9 Replies
View Related
Mar 14, 2010
Had ATI card on my old setup, so this is my first experience with nVidia and Linux. I follow [URL]... , but run into problem with module assistant.
[code]...
"Fel" at the end is Swedish for "Error". I can't understand what to do to correct the error. When i look in Synaptic, it seems i have both gcc 4.4 and gcc 4.3. The gcc 4.3 states latest 4.3.4-6.
View 6 Replies
View Related
Sep 17, 2010
I want to enable the desktop effects (such as smooth minimising, smooth viewport switching, etc) but it says that "Desktop effects are not supported on your current hardware / configuration. Would you like to activate them anyway?"
My first question is how do I check to make sure whether the NVIDIA drivers are enabled or not? (I know they're on the system, since 'NVIDIA X Server Settings' is in the list of applications).
My second question is how do I activate these drivers?
Note that I don't have root access, since I'm using a university machine, so I can't edit the xorg.conf or anything like that.
openSUSE 11.3 64bit
GNOME desktop
View 8 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
May 1, 2011
I just installed 11.04 and I knew I would have to install the NVidia video drivers. So it was no surprise when it popped up a warning and dropped me into Gnome Classic view. So I turned on the NVidia drivers and rebooted. In my desktop selection menu on the login screen I have "Ubuntu" and "Ubuntu Classic".
Unfortunately they look exactly alike, with the Gnome panel along the top, and the panel with the taskbar, desktops and recylce bin on the bottom. I've gone back-and-forth a few times and nothing has changed. Some changes in one environment is not set in the other, like they really are 2 different environments.
According to the Software Center, Unity (not Unity 2D) *is* installed.So how can I boot into the Unity desktop?
View 9 Replies
View Related
Mar 5, 2010
I have bought asus notebook with nvidia geforce GT 320m, and installed ubuntu 9.10 notebook remix, and i can't found any drivers for video card, iam new in linux.
View 9 Replies
View Related
Dec 26, 2010
I updated my video card drivers, but when I boot back up, I have no GUI and am given a terminal because it does not recognize the drivers. I have already changed "quiet splash" to "nomodeset" .
Specs:ATI Mobility Radeon 5650
500GB (7200RPM) Hard Drive (SATA)
Intel Core i5-450M processor 2.40GHz with Turbo Boost Technology up to 2.66 GHz
4gb of ram
Ubuntu 10.10
View 9 Replies
View Related
Dec 26, 2009
I installed a PCI graphics card "ATI RV280 5960" but it still says desktop effects cannot be enabled. What do i need to install/do to get that to work?
Using openSUSE 11.1
The card itself (on a sticker) says it's a Radeon 9250.
View 5 Replies
View Related
Nov 13, 2010
is this possible? Or does one have to use the binary blobs?
View 1 Replies
View Related
Jun 8, 2011
I'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
View 3 Replies
View Related
Jun 8, 2011
First off, I'll come clean and admit that I am still relatively green to Linux, but I'm not afraid to tackle the complex. I have a few stroke-inducing issues that I haven't been able to resolve as a usually do by eye-grepping Google and the various forums. Of course, I'm running Ubuntu 11.04 with Unity - which is fairly new and undiscovered country.
I've got this no-name brand, sample laptop from a manufacturing partner of ours out of Shenzhen China. It's rocking a Core i3 M350 with an nVidia GT 330M (discreet-ish?)& apparently some flavor of Intel integrated graphics.
Now, there are so many variables at play, I'm not quite sure where to begin - so please bear with this post a bit longer as I unravel the details. Loading the nVidia drivers (both proprietary and the experimental open varieties) results in Unity no longer working and dumping me back to the classic Ubuntu desktop. I believe it has something to do with the fact that I have no ability to disable the integrated graphics through the BIOS and Ubuntu has set its hopes and dreams upon using Intel graphics for the rest of all time.
That said, running without the nVidia graphics drivers, I am able to use Unity and it runs pretty well.The only caveat being that on occasion (read: intermittently), when the laptop wakes up from suspend/hibernate mode, playing Flash video in full screen gets choppy (stutters). Restarting Ubuntu resolves the issue. I suppose I should verify that I am using Firefox 4.
In addition, there are times that the WiFi adapter will not wake, and using the keyboard function key to power cycle it ceases to function. A complete shutdown is required to address this one. i.e. Restarting and warm-booting does not fix it.
Did I mention Skype is a terd? I don't actually expect a fix for this pile of hot mess - just thought it might make someone laugh. If there is anyone here that could lend me a hand with any or all of these issues, not only will you have the satisfaction of knowing that you are one bad Mambajamba (TM), but I'll buy you a drink or something via Dwolla or bitcoin.
View 2 Replies
View Related
Jun 24, 2010
I was messing around with Ubuntu trying to make somethings work. Then i rebooted ,and I wasn't able to turn on Visual Effects. So I'm guessing that I must have replaced my video card driver with a non-compatible one or just removed it without knowing. So I was wondering "How Can I Switch Back To The Video Card Driver Ubuntu Came With?" Without reinstalling Ubuntu? Since I was able to at least switch on Visual Effects with it.
And could you also take a look at: [URL]...
View 8 Replies
View Related
May 25, 2011
how to enable the Gnome Shell with an AMD 6950 graphics card and the default Fedora 15 drivers? I may try the AMD Catalyst proprietary drivers but from history those usually lag behind the Fedora versions. I also read some people had issues with the current AMD Catalyst drivers in the Catalyst guide thread.
Also, the AMD 6950 graphics card fan is at full speed all the time in Fedora 15. I do believe you can with the Catalyst drivers using aticonfig but was wondering about the default Fedora 15 drivers?
View 2 Replies
View Related
