OpenSUSE Hardware :: Video Card Drivers - Monitor Goes Blank ?
Feb 11, 2010
So after I installed the ATI Radeon 3400 series video card in my machine, the Xserver cant start! after it loads, it takes me to the init 3. When I tried startx, the screens either go blank or doesnt let me.
I tried to install everything following this website: [url]
I wanted dual monitors but now I cant even get one. The xwindows doesnt appear.
Things I tried:
1. Deleted the xorg.conf and reconfigured (didnt work).
2. sax2 -r -m 0=versa (didnt work)
3. reconfigured the ATI radeon driver from init 3 (didnt work)
4. copy and paste the oold version of xorg.conf (didnt work)
5. tried to run set apt or dpkg-reconfigure command (commands not found)
6. tried xconfig and prompt the best I coudl (didnt work).
7. aticonfig commands (As shown in website) (also didnt work)
I have the live CD to run it from there but I dont know what to do once I get to the terminal.
Is there any way I can revert to previous configuration since the ATI driver gives me some problems? Like a restore function in windows?
How or what files I should change for the X-server to run properly (is there any other file than xorg.conf?....)
The monitors I have:
2009W Dell Monitor
1398 Dell Monitor (I wan to get the dual exntended monitor but it seems to gave me only the mirror image, thats why I tried to reconfigure the video card)
VideoCard:
ATI HD Radeon Mobile 3400 Series
Computer:
Dell Optiplex 680 (i believe) with SUSE 11.26 and x86_64 bit
Or if you can send me the xorg.conf file ...
View 3 Replies
ADVERTISEMENT
Feb 4, 2011
openSUSE 11.2 (i586)
VERSION = 11.2
on an IBM x3250
Problem is that after the screen comes up to chose the default version or failsafe, my monitor shows no input. If I delete the VGA 0x031 (i think that's the number) on the Options line in the screen where you chose the version, I get my command line interface.
Can I make the blank VGA options permanent?
View 5 Replies
View Related
Apr 13, 2011
The installer has left me with 1,024 by 768 pixels and a driver that will not reach anything like the res my card and monitor will cope with. The display is currently blanking every 30secs or so for a very brief interval as well.
I may have missed something on the install but there didn't seem to be any opertunity to choose either a driver or monitor type. I was eating my dinner through most of it.
I had a brief flirtation with Mandriva and know that linux should be able to nearly fully support my monitor which is 1680x1050 by Belinea. Earlier open suse install gave the option of seting this sort of thing up and listed all of Berlinea's monitors as well.
The card is an nvidia 210 by Asus. Reported as a 200. I do not want to try installing an nvidia driver yet as I understand that there will be problems. Also I have a YAST ipv6 dns problem = no updates.
View 9 Replies
View Related
Jul 18, 2011
I run LXDE with Openbox as WM on Fedora 15. When I watch videos with Totem or VLC, the monitor doesn't register any activity, and goes into power saving mode (goes blank) after a certain amount of time (about 10-15 mins). How can I prevent this from happening? (I just switched over to Fedora from Arch, using GDM and Openbox. I didn't have this problem on that installation, so it's probably not hardware related.)
View 1 Replies
View Related
Feb 11, 2010
after I installed the ATI Radeon 3400 series video card in my machine, the Xserver cant start! after it loads, it takes me to the init 3. When I tried startx, the screens either go blank or doesnt let me. I tried to install everything following this website:
[URL]
I wanted dual monitors but now I cant even get one. The xwindows doesnt appear. Things I tried:
1. Deleted the xorg.conf and reconfigured (didnt work).
2. sax2 -r -m 0=versa (didnt work)
3. reconfigured the ATI radeon driver from init 3 (didnt work)
4. copy and paste the oold version of xorg.conf (didnt work)
5. tried to run set apt or dpkg-reconfigure command (commands not found)
6. tried xconfig and prompt the best I coudl (didnt work).
7. aticonfig commands (As shown in website) (also didnt work)
I have the live CD to run it from there but I dont know what to do once I get to the terminal. Is there any way I can revert to previous configuration since the ATI driver gives me some problems? Like a restore function in windows? how or what files I should change for the X-server to run properly (is there any other file than xorg.conf?....)
The monitors I have:
2009W Dell Monitor
1398 Dell Monitor (I wan to get the dual exntended monitor but it seems to gave me only the mirror image, thats why I tried to reconfigure the video card)
VideoCard:
ATI HD Radeon Mobile 3400 Series
Computer:
Dell Optiplex 680 (i believe) with SUSE 11.26 and x86_64 bit
View 2 Replies
View Related
May 26, 2011
i had an nvidia geforce 6800 card in my pc and that just all of a sudden stopped working (the screen went blank) so i went to my onboard video and it works but no matter what video card i install, it doesn't work (still a black screen) and i know the cards work on other pc's but just not this one. i've tried different ati cards and nvidia cards with no luck. i've also wanted to disable my onboard card all together but my bios doesn't have that option for some reason. i also thought that it might be the slot but when i install the video card in the pc, the fan works so it's not that.
View 4 Replies
View Related
Mar 5, 2010
I have bought asus notebook with nvidia geforce GT 320m, and installed ubuntu 9.10 notebook remix, and i can't found any drivers for video card, iam new in linux.
View 9 Replies
View Related
Dec 26, 2010
I updated my video card drivers, but when I boot back up, I have no GUI and am given a terminal because it does not recognize the drivers. I have already changed "quiet splash" to "nomodeset" .
Specs:ATI Mobility Radeon 5650
500GB (7200RPM) Hard Drive (SATA)
Intel Core i5-450M processor 2.40GHz with Turbo Boost Technology up to 2.66 GHz
4gb of ram
Ubuntu 10.10
View 9 Replies
View Related
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
Jun 24, 2010
I was messing around with Ubuntu trying to make somethings work. Then i rebooted ,and I wasn't able to turn on Visual Effects. So I'm guessing that I must have replaced my video card driver with a non-compatible one or just removed it without knowing. So I was wondering "How Can I Switch Back To The Video Card Driver Ubuntu Came With?" Without reinstalling Ubuntu? Since I was able to at least switch on Visual Effects with it.
And could you also take a look at: [URL]...
View 8 Replies
View Related
Dec 21, 2010
I just installed a nvidia TNT2 m64 video card on my AMD 2500+ Ubuntu Linux 10.04 on Gnome 2.30.2. (yeah, it's old). I'm trying to install the proper driver, but system>admin>Hardware drivers says there are no proprietary drivers enabled. nVidia synaptic packages installed (settings; common; modaliases 96, 173, current; xorg video). I used to have the same, or nearly the same card working great before some a**hole stole it. How to configure?
View 1 Replies
View Related
Sep 14, 2010
In System Monitor, under the "System" tab, my Processor and RAM is listed (including specs for each of these), but my Intel graphics card (4500) is not listed at all? I am experiencing some periodic screen flicker - could it be that the video card is not detected?
Screencap of my system monitor [URL]
View 4 Replies
View Related
Jan 5, 2010
I have three monitors. Two are hooked up to an ATI card and the third to an nVidia 6800 card. This third monitor is not being recognized. I tried installing nVidia's official Linux drivers but received an error that no compatible device is present. Going into System > Preferences > Display shows only my first two monitors. I'm running Ubuntu 9.10 x64.
View 1 Replies
View Related
Jan 1, 2010
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
View 8 Replies
View Related
Mar 22, 2015
Where should I get the drivers for the video card R7 260X to run on Debian Wheezy? Because it cant be from amd site, considering that I installed from their site, but when running apt-get check is said to me that there was the missing dependence fglrx-core..I also couldn't remove it, because it had other unmet dependencies... After long time attempting to solve on my own I just got enough pissed that I formatted the machine.Now I am asking here to find out what is the best practices when installing those drivers, because clearly I wasn't doing it right...
View 5 Replies
View Related
Jan 5, 2009
Quote:
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
View 3 Replies
View Related
Nov 6, 2010
How is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
View 1 Replies
View Related
Oct 8, 2010
I wanted to try 3d desktop so i installed 3d support for nvidia graphics using the instructions on this webpage [url]
I Dont have nvidia i have ati so needless to say i have to gui when i boot up
It shows the fedora loading bubble then a blinking cursor.
I can get to a virtual terminal.
So how do i undo what i did I just want to get it back to normal i dont need 3d support.
View 3 Replies
View Related
Jul 15, 2010
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
View 8 Replies
View Related
Mar 10, 2011
0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.
I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.
View 1 Replies
View Related
Aug 10, 2009
I've loaded Fedora and must say what a nice OS! But I'm having some issues getting the video working correctly so let me jump right into the issue. The video is very garbled and hard to read. can't seem to find a way to correct what would appear to be a driver issue. Here are a list of things tried:
- display works fine with Ubuntu
- display is clear but is chopped off when using an external monitor from onboard vga slot
The video card is an ATI radeon and the linux drivers from the ATI site don't work with the new images that are out yet.
View 3 Replies
View Related
Feb 16, 2010
How do I check what video driver I have installed in the terminal? Then how do I install or yum install it? I wanna do everything through command line soz.. I have an ATI 4850 I believe.
View 2 Replies
View Related
Mar 25, 2010
After having a lot of trouble with vista and no chance of getting Windows 7 anytime soon, I decided to get Ubuntu and use dual booting with vista. I had recently installed it about two days ago and for the most part it worked pretty well. That is until I installed the driver for my video card, an ATI Radeon HD2600 pro, then things went down hill for me. Every time I try and boot Ubuntu it now goes to a black screen after the logo comes up and i am unable to do anything. I have tried to look up some solutions, but I am still relatively new to programing and some of this stuff seems a bit complicated for me. Is there a simple solution to this that does not require a reinstall?
View 9 Replies
View Related
May 17, 2010
I've tried to enable the drivers for a Nvidia 8400GS video card on Ubuntu 10.04. I've tried change desktop background > visual effects. It tells me Desktop effects can't be enabled. Sudo jockey-gtk looks and tells me no proprietary drivers are in use by my system. I've tried installing from Nvidia's site and that seems to go okay but doesn't seem to work. I have an internal video card that can't be turned off in BIOS )either ON or AUTO) that might be causing me problems.Lspci:Quote:
ron@desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
[code]....
View 1 Replies
View Related
Apr 11, 2011
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
View 9 Replies
View Related
Feb 3, 2010
I have ubuntu 9.10 I have the ATI Technologies Inc Mobility Radeon HD 3600 Series [1002:9598]video card. I dont know what it is but i want to enable extra visual effects. unfortunally a message stating "searching for drivers" appears, eventuall folowed by " Visual Effects can not be enabled" i think this is due to the drivers obviosly.
what are the drivers I need for linux (if any) for my specific video card? what do I need to do? also which video card are best fit for ubuntu/ linux? note: I dont know what it is, but originally when I first installed ubuntu I did something and the visual effects had worked had worked and up until recently i may or may not have of messed with any thing could i have of touched something
View 1 Replies
View Related
Dec 6, 2009
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
View 9 Replies
View Related
Aug 8, 2010
setup the correct mode for my laptop-video card-monitor
Video card - ATI mobility Radeon X1600
External Monitor - Belinea b.display 2 22"
Right now the external monitor is working, but sometimes it goes black for 2-3 seconds and then works again. This happens sometimes 5 times in a row, sometimes once, sometimes none. Other issue, when I install any new kernel it doesn't work. I get weird picture on monitor.
View 2 Replies
View Related
Nov 24, 2010
I have repeatedly installed CentOS 5.5 64-bit on a Dell T3500 with an nVidia Quadro FX 580, in an attempt to get dual monitor support to work to no avail. Everything works fine when just one monitor is plugged in and I do not try to enable or plug in a second monitor. I have installed the Dell DKMS, and the Dell recommended drivers (from Dell site) on one installation, I installed the nVidia drivers (from nVidia site) on another, and have tried with what CentOS loads by default on another. The results are the same every time: When I reboot as directed I get a black screen. I can recover by hard shutdown and unplugging one of the monitors, but that doesn't solve my problem. Has anyone had a similar experience, or have any helpful guidance? I am not very Linux savvy. This is for multiple machines in a corporate environment.
Information for general problems.
== BEGIN uname -rmi ==
2.6.18-194.26.1.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
[Code]...
View 3 Replies
View Related
Nov 21, 2010
I have problem with onboard ATI ES1000. Server details:
Supermicro X7SBI, Q6600, 8G ram. Centos 5.5 minimal installation, without X.
Problem is that with all kernel-xen x86_64 from current kernel-xen-2.6.18-194.26.1.el5.x86_64 back to kernel-xen-2.6.18-128.el5.x86_64 after kernel boots monitor goes blank and says "no video, going to power save".
Google finds similar problems and sugestions was to add "nomodeset". With this option monitor also blanks after kernel boot, but says "out of range". Other options to modify xorg.conf does not apply, becouse there is no X installed.
I try with multiple monitors, without success. This happens only with 64bit kernel-xen. All other 32 and 64 bit kernels and 32bit kernel-xen works fine, video is ok. This happens to 6 servers, all are same hardware, used as cluster. Installation with "linix text" allways is fine, video disappears after first reboot when standart kernel is booted. I also tryed with almost all possible "vga=xxxx" kernel options and none of them works.
What else to try?
# lspci
View 4 Replies
View Related
